PHOTOCOUPLER PS2865-1 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE 4-PIN SOP PHOTOCOUPLER −NEPOC Series− DESCRIPTION The PS2865-1 is an optically coupled isolator containing GaAs light emitting diodes and an NPN silicon phototransistor. The PS2865-1 meets insulation thickness 0.4 mm and BSI′s insulation supplementary approved. The package has shield effect to cut off ambient light, and is mounted in a plastic SOP (Small Outline Package) for high density applications. FEATURES • Isolation distance (0.4 mm MIN.) • AC input response • High isolation voltage (BV = 2 500 Vr.m.s.) • SOP (Small Outline Package) type • High-speed switching (tr = 4 µs TYP., tf = 5 µs TYP.) • Ordering number of tape product: PS2865-1-F3, F4 • Safety standards: PS2865-1 • UL approved: File No. E72422 (S) • BSI approved: No. 8514, 8515 APPLICATIONS • Modem • Programmable logic controllers • Power supply Document No. PN10259EJ01V0DS (1st edition) (Previous No. P15094EJ2V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2865-1 PACKAGE DIMENSIONS (UNIT: mm) TOP VIEW 2.7±0.3 4 3 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 1 2 7.0±0.3 0.15+0.10 –0.05 2.0±0.1 0.1±0.1 4.4 0.5±0.3 1.27 0.4±0.1 0.12 M PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 4.5 mm Creepage Distance 4.5 mm Isolation Distance 0.4 mm MARKING PS2865-1 N65 003 Assembly Lot Last number of type: 65 "N" of NEC 0 03 Week Assembled Year Assembled (Last 1 Digit) 2 Data Sheet PN10259EJ01V0DS PS2865-1 ORDERING INFORMATION (Solder Contains Lead) Part Number PS2865-1 Package 4-pin SOP Application Part Number Packing Style 50 pcs (Tape 50 pcs cut) PS2865-1-F3 *1 PS2865-1 Embossed Tape 3 500 pcs/reel PS2865-1-F4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS2865-1-A Package 4-pin SOP Application Part Number Packing Style 50 pcs (Tape 50 pcs cut) PS2865-1-F3-A *1 PS2865-1 Embossed Tape 3 500 pcs/reel PS2865-1-F4-A *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Symbol Ratings Unit IF ± 50 mA PD 60 mW IFP ± 1.0 A Collector to Emitter Voltage VCEO 40 V Emitter to Collector Voltage VECO 5 V IC 40 mA ∆PC/°C 1.2 mW/°C PC 120 mW BV 2 500 Vr.m.s. Operating Ambient Temperature TA –55 to +100 °C Storage Temperature Tstg –55 to +150 °C Diode Forward Current (DC) Power Dissipation Peak Forward Current Transistor *1 Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output Data Sheet PN10259EJ01V0DS 3 PS2865-1 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Transistor Symbol Conditions MIN. TYP. MAX. Unit 1.4 V Forward Voltage VF IF = ± 5 mA 1.1 Terminal Capacitance Ct V = 0 V, f = 1 MHz 30 Collector to Emitter Dark ICEO IF = 0 mA, VCE = 40 V CTR IF = ± 5 mA, VCE = 5 V VCE (sat) IF = ± 10 mA, IC = 2 mA pF 100 nA 400 % 0.3 V Current Coupled Current Transfer Ratio (IC/IF) 50 200 *1 Collector Saturation Voltage Isolation Resistance RI-O VI-O = 1 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz *2 tr Rise Time *2 Fall Time 10 VCC = 5 V, IC = 2 mA, RL = 100 Ω tf N: 50 to 400 (%) *2 Test circuit for switching time Pulse Input VCC PW = 100 µs Duty cycle = 1/10 IF In monitor 4 0.4 pF 4 µs 5 *1 CTR rank VOUT 50 Ω Ω 11 RL = 100 Ω Data Sheet PN10259EJ01V0DS PS2865-1 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 80 60 40 20 50 25 0 100 75 210 180 150 120 90 60 30 100 75 Ambient Temperature TA ( ˚C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 35 Collector Current IC (mA) 30 Forward Current IF (mA) 50 Ambient Temperature TA (˚C) 100 10 25 0 TA = +100 ˚C +60 ˚C +25 ˚C 1 0 ˚C –25 ˚C –50 ˚C 0.1 IF = 25 mA 20 mA 15 mA 25 10 mA 20 15 5 mA 10 5 Collector to Emitter Dark Current ICEO (nA) 0.01 0.0 0.5 1.0 1.5 0 2.0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 000 Collector Current IC (mA) 100 1 000 VCE = 20 V 40 V 100 10 1 –25 0 25 50 75 100 10 mA 5 mA 2 mA 10 1 0.1 0.0 Ambient Temperature TA (˚C) IF = 1mA 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) Data Sheet PN10259EJ01V0DS 5 PS2865-1 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 400 1.2 350 VCE = 5 V, n=3 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 ˚C, IF = 5 mA, VCE = 5 V 0.2 0.0 –50 0 –25 25 50 300 250 Sample A B C 200 150 100 50 0 0.1 100 75 1 100 10 Ambient Temperature TA (˚C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 100 1 000 IF = 1 mA, VCC = 5 V, CTR = 200 % 10 Switching Time t (µs) IC = 2 mA, VCC = 5 V, CTR = 200 % Switching Time t (µ s) Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE tf tr td 1 10 ts 100 100 ts 10 tr td 1 0.1 10 10 k 1k tf 100 1k 10 k 100 k Load Resistance RL (Ω) Load Resistance RL (Ω) LONG TERM CTR DEGRADATION FREQUENCY RESPONSE 1.2 IF = 5 mA 1.0 –5 CTR (Relative Value) Normalized Gain Gv 0 100 Ω RL = 1 kΩ –10 300 Ω –15 IF = 1 mA, TA = 25 ˚C IF = 5 mA, TA = 25 ˚C IF = 20 mA, TA = 25 ˚C IF = 20 mA, TA = 60 ˚C 0.6 0.4 0.2 –20 –25 0.1 0.8 1 10 100 1 000 0.0 1 103 104 Time (Hr) Frequency f (kHz) Remark The graphs indicate nominal characteristics. 6 102 Data Sheet PN10259EJ01V0DS 105 106 PS2865-1 TAPING SPECIFICATIONS (UNIT: mm) φ 1.5+0.1 –0 7.5±0.1 4.0±0.1 16.0±0.3 2.0±0.1 7.55±0.1 1.75±0.1 Outline and Dimensions (Tape) 2.8 MAX. 0.3 1.55±0.1 2.3±0.1 2.85±0.1 4.0±0.1 Tape Direction N65 003 N65 003 N65 003 N65 003 N65 003 N65 003 N65 003 N65 003 N65 003 PS2865-1-F4 N65 003 PS2865-1-F3 Outline and Dimensions (Reel) R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 17.5±1.0 21.5±1.0 Packing: 3 500 pcs/reel Data Sheet PN10259EJ01V0DS 15.9 to 19.4 Outer edge of flange 7 PS2865-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 235 °C or below (package surface temperature) • Time of temperature higher than 210 °C 30 seconds or less • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature 260 °C or below (molten solder temperature) • Time 10 seconds or less • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between corrector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. 8 Data Sheet PN10259EJ01V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.