NEC PS9714-F4

NEC's HIGH CMR, 10 Mbps
OPEN COLLECTOR OUTPUT TYPE
5 PIN SOP OPTOCOUPLER
PS9714
FEATURES
DESCRIPTION
• HIGH COMMON MODE TRANSIENT IMMUNITY:
CMH, CML: ± 20 kV/µs TYP
NEC's PS9714 is an optically coupled, high speed isolator
containing a GaAIAs LED on the light emitting diode (input)
side and a photodiode and a signal procesing circuit on the
detector (output) side on one chip. The PS9714 is in a plastic
SOP (Small Outline Package) for high density applications.
• PULSE WIDTH DISTORTION:
|tPHL - tPLH| = 3 ns TYP
• HIGH SPEED RESPONSE:
10 Mbps
• HIGH ISOLATION VOLTAGE:
BV: 2500 Vr.m.s.
APPLICATIONS
• OPEN COLLECTOR OUTPUT TYPE
• SMALL OUTLINE PACKAGE:
5 PIN SOP
• MEASUREMENT EQUIPMENT
• TAPE AND REEL AVAILABLE:
PS9714-F3, F4: 3500 Pcs/Reel
• FACTORY AUTOMATION NETWORK
• PDP
• SAFETY STANDARDS:
UL and VDE0884 approved
ELECTRICAL CHARACTERISTICS (TA = -40 to +85°C unless otherwise specified)
PART NUMBER
Detector
Diode
SYMBOLS
VF
UNITS
MIN
TYP
MAX
Forward Voltage, IF = 10 mA, TA = 25°C
V
1.4
1.65
1.9
IR
Reverse Current, VR = 3 V, TA = 25°C
µA
Ct
Terminal Capacitance, V = 0 V, f = 1 MHz, TA = 25°C
pF
30
IOH
High Level Output Current, VCC = VO = 5.5 V, VF = 0.8 V
µA
0.02
250
VOL
Low Level Output Voltage, VCC = 5.5 V, IF = 5 mA, IO = 13 mA
V
0.15
0.6
ICCH
High Level Supply Current, VCC = 5.5 V, IF = 0 mA
mA
3
8
ICCL
Low Level Supply Current, VCC = 5.5 V, IF = 10 mA
mA
7.0
11
10
2.0
5.0
IFHL
Threshold Input Current, VCC = 5 V, VO = 0.8 V, RL = 350 Ω
%
RI-O
Isolation Resistance,Vin-out = 1kVDC, RH = 40 to 60%, TA = 25°C
Ω
CI-O
Isolation Capacitance, V = 0, f = 1 MHz, TA = 25°C
pF
tPHL
Propagation Delay Time, High → Low1,VCC = 5 V, IF = 7.5 mA, RL = 350 Ω
TA = 25°C
ns
Propagation Delay Time, Low → High1, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω
TA = 25°C
ns
tr
Rise Time, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω
ns
20
tf
tPLH
Coupled
PS9714
PARAMETERS
1011
0.9
54
100
75
51
100
75
Fall Time, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω
ns
10
PWD
Pulse Width Distortion, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω
ns
3
tPSK
Propagation Skew, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω
ns
CMH
Common Mode Transient Immunity at High Level Output2
VCC = 5 V, VCM = 1 kV, TA = 25°C, IF = 0 mA, VO (MIN) = 2 V
kV/µs
10
20
CML
Common Mode Transient Immunity at Low Level Output2
VCC = 5 V, VCM = 1 kV, TA = 25°C, IF = 7.5 mA, VO (MAX) = 0.8 V
kV/µs
10
20
50
60
Please see notes on the next page.
California Eastern Laboratories
PS9714
ABSOLUTE MAXIMUM RATINGS1
RECOMMENDED
OPERATING CONDITIONS
(TA = 25°C unless otherwise specified)
SYMBOLS
Diode
IF
VR
Detector
VCC
VO
IO
PC
BV
TA
TSTG
PARAMETERS
UNITS
RATINGS
mA
V
30
3
V
V
mA
mW
Vr.m.s.
°C
°C
7
7
25
40
2500
-40 to +85
-55 to +125
Forward Current
Reverse Voltage
Supply Voltage
Output Voltage
Output Current
Power Dissipation2
Isolation Voltage3
Operating Ambient Temp.
Storage Temperature
SYMBOLS
VFL
Low Level Input Voltage
V
0
0.8
IFH
High Level Input Current
mA
6.3
12.5
VCC
Supply Voltage
V
4.5
Ω
330
N
TTL (loads) (RL = 1kΩ)
RL
Pull-up Resistance
No. 1 Pin Mark
Packing Style
Safety
Standards
Approval
Magazine Case 100 pcs
PS9714-F3
Embossed Tape 3500 pcs/reel
UL
Approved
PS9714-F4
PS9714-V
Magazine Case 100 pcs
VDE0884
PS9714-V-F3
Embossed Tape 3500 pcs/reel
Approved
PS9714-V-F4
PACKAGE OUTLINE (Units in mm)
PIN CONNECTION
(Top View)
4.0±0.5
5
4
3
1.
2.
3.
4.
5.
1
Anode
Cathode
GND
VO
VCC
2
2.0
7.0 ± 0.3
4.4
0.15 +0.10
-0.05
2.1±0.2
9714
N003
1.27
0.25 M
0.5 ± 0.3
1.3
5.5
5
Assembly lot
Week Assembled
Year Assembled (Last 1 Digit)
Rank Code
PS9714
0.1 ± 0.1
5
N 0 03
ORDERING INFORMATION
0.4 +0.10
-0.05
UNITS MIN TYP MAX
MARKING
Notes:
1. Operation in excess of any one of these parameters may result in
permanent damage.
2. Applies to output pin VO and power supply pin VCC.
2. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input
and output.
Part Number
PARAMETERS
4k
PS9714
(Continued from first page.)
Notes:
1. Typical values at TA = 25°C.
2. Because VOL of 2 V or more may be output when LED current input and when output supply of VCC = 2.6 V or less, it is important to confirm
the characteristics (operation with the power supply on and off) during design, before using this device.
3. Test Circuit for Propagation Delay Time:
Pulse Input
(
(
PW = 10 µs
Duty Cycle = 1/10)
0.1
µF
Vcc = 5 V
IF = 7.5 mA
50 %
Input
RL = 350 Ω
VOH
VO (monitor)
CL
Output
Input (monitor)
1.5 V
VOL
47 Ω
tPLH
tPHL
*CL is approximately 15 pF which includes probe and stray wiring capacitance.
1 kV
90 %
4. Test Circuit for Common Mode Transient Immunity:
VCM
GL SW IF
10 %
0.1 µF
0V
Vcc = 5 V
tf
tr
RL
VO (monitor)
CL
VO
(IF = 0 mA)
VOH
2V
VCM
0.8 V
VOL
VO
(IF = 7.5 mA)
USAGE CAUTIONS
1. Protect against static electricity when handling this product.
2. Bypass capacitor greater than 0.1 µF is used between VCC and GND near device (lead distance: 10 mm MAX).
TYPICAL PERFORMANCE CURVES (TA = 25°C,
unless otherwise specified)
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
DETECTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
50
Detector Power Dissipation, PC (mW)
Maximum Forward Current, IF (mA)
40
30
20
10
0
20
40
60
80 85
Ambient Temperature, TA (°C)
100
40
30
20
10
0
0
20
40
60
80
Ambient Temperature, TA (°C)
85
100
PS9714
TYPICAL PERFORMANCE CURVES (TA = 25°C,
unless otherwise specified)
DETECTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
FORWARD CURRENT vs.
FORWARD VOLTAGE
High Level Supply Current, ICCH (mA)
Low Level Supply Current, ICCL (mA)
Forward Current, IF (mA)
100
10
TA = +85°C
+50°C
+25°C
1
0°C
-25°C
0.1
0.01
1.0
1.2
1.4
1.6
1.8
2.0
2.2
12
10
8
ICCL (IF = 10 mA)
6
4
ICCH (IF = 0 mA)
2
0
-50
2.4
Forward Voltage, VF (V)
25
50
0.6
Low Level Output Voltage, VOL (V)
VCC = 5.0 V,
TA = 25°C
5
4
RL = 350 Ω
1.0 Ω
4.0 kΩ, 4.7 kΩ
3
2
1
0
1
2
3
4
5
0.4
0.2
0.1
Propagation Delay Time, tPHL, tPLH (ns)
VCC = 5.0 V
VO = 0.6 V
2.0
1.5
RL = 350 Ω
1.0 Ω
4.7 kΩ, 4.0 kΩ
0.5
25
50
25
50
75
100
100
IF = 7 mA
VCC = 5.0 V
80
tPLH: RL = 1.0 kΩ
tPLH: RL = 350 Ω
60
40
tPHL: RL = 350 Ω, 1.0 kΩ
20
0
-50
0
0
PROPAGATION DELAY TIME
vs. AMBIENT TEMPERATURE
2.5
-25
-25
Ambient Temperature, TA (°C)
THRESHOLD INPUT CURRENT
vs. AMBIENT TEMPERATURE
0
-50
IOL = 16.0 mA
13.0 mA
10.0 mA
6.0 mA
0.3
0
-50
6
IF = 5.0 mA
VCC = 5.5 V
0.5
Input Current, IF (mA)
1.0
100
75
LOW LEVEL OUTPUT VOLTAGE
vs. AMBIENT TEMPERATURE
6
Output Voltage, VO (V)
0
Ambient Temperature, TA (°C)
OUTPUT VOLTAGE vs. INPUT CURRENT
Threshold Input Current, IFHL (mA)
-25
75
Ambient Temperature, TA (°C)
-25
0
25
50
75
100
Ambient Temperature, TA (°C)
100
PS9714
TYPICAL PERFORMANCE CURVES (TA = 25°C,
unless otherwise specified)
PULSE WIDTH DISTORTION
vs. AMBIENT TEMPERATURE
120
60
IF = 7.5 mA
VCC = 5.0 V
tPLH: RL = 4.7 kΩ
100
tPLH: RL = 4.0 kΩ
80
tPHL: RL = 4.7 kΩ
60
tPHL: RL = 4.0 kΩ
40
20
0
-50
-25
0
25
50
75
100
Pulse Width Distortion, |tPHL—tPLH| (ns)
Propagation Delay Time, tPHL, tPLH (ns)
PROPAGATION DELAY TIME
vs. AMBIENT TEMPERATURE
IF = 7 mA
VCC = 5.0 V
50
RL = 4.7 kΩ
30
20
10
0
-50
Propagation Delay Time, tPHL, tPLH (ns)
IF = 7.5 mA
VCC = 5.0 V
Switching Time, tr, tf (ns)
tr: RL = 4.0 kΩ, 4.7 kΩ
300
tr: RL = 1.0 kΩ
tr: RL = 350 Ω
tr: RL = 350 Ω, 1.0 kΩ,
4.0 kΩ, 4.7 kΩ
-25
0
25
50
75
Ambient Temperature, TA (°C)
0
25
50
75
100
PROPAGATION DELAY TIME
vs. INPUT CURRENT
400
0
-50
-25
Ambient Temperature, TA (°C)
SWITCHING TIME vs.
AMBIENT TEMPERATURE
100
RL = 350 Ω
1.0 kΩ
Ambient Temperature, TA (°C)
200
4.0 kΩ
40
100
120
100
tPLH: RL = 4.0 kΩ
80
60
40
tPLH: RL = 1.0 kΩ
20
tPHL: RL = 350 Ω, 1.0 kΩ,
4.0 kΩ
tPLH: RL = 350 Ω
0
05
7
9
VCC = 5.0 V,
TA = 25°C
11
13
Input Current, IF (mA)
15
PS9714
TAPING SPECIFICATIONS
Tape Outline and Dimensions
4.0±0.1
2.9 MAX
+0.1
2.0±0.05
1.5 -0
1.75±0.1
5.5±0.05
12±0.2
7.4±0.1
2.4±0.1
1.55±0.1
4.6±0.1
0.3
8±0.1
Tape Direction
PS9714-F3
PS9714-F4
Reel Outline and Dimensions
1.5 ± 0.1
12
0°
1.5 ± 0.5
60
°
φ80±5.0
φ 330
2.0 ± 0.5
φ13.0±0.5
φ21.0 ± 0.8
6.0 ± 1
+2.0
Packing: 3500 pcs/reel
12.4 -0.0
PS9714
RECOMMENDED SOLDERING CONDITIONS
Package Surface Temperature T (ßC)
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of temperature higher than 210 ºC
• Number of reflows
• Flux
235 ûC or below (package surface temperature)
30 seconds or less
Three
Rosin flux containing small amount of chlorine (The flux with a maximum
chlorine content of 0.2 Wt % is recommended.)
(heating)
to 10 s
235 ßC (peak temperature)
210 ßC
to 30 s
100 to 160 ßC
60 to 120 s
(preheating)
Time (s)
(2) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify
CEL for all damages resulting from such improper use or sale.
02/12/2003
A Business Partner of NEC Compound Semiconductor Devices, Ltd.