WWW.PHIHONG.COM 60 Watt Universal 2-Wire Input Adapter PSAA60W Power Supply meets CEC and EISA Requirements Features • Low Cost • Efficiency Level IV Compliance • Class B EMI Applications • Portable Equipment • Peripherals Safety Approvals • • • Non-vented/Spill-proof Case No Load Power Consumption < 0.5W Low Profile Design • • Networking Gaming Machines • cUL / UL EN60950-1 • CE Mechanical Characteristics • Length: 130mm (5.12in) • Width: 60mm (2.36in) Output Specifications • • TUV EN60950-1 (except 48V model) CB IEC60950-1 Model PSAA60W-120 PSAA60W-150 PSAA60W-180 PSAA60W-240 PSAA60W-480 DC Output Voltage +12V +15V +18V +24V +48V • • Load Min. Max. 0A 5.0A 0A 4.0A 0A 3.3A 0A 2.5A 0A 1.25A Height: 32mm (1.30in) Weight: 300g (10.58oz) Ripple (1) P-P (max.) 120mV 150mV 180mV 240mV 480mV Regulation Line Load ±5% ±5% ±5% ±5% ±5% Efficiency Level (1) Measured by-pass capacitors 0.1uF / 100uF at output connector terminal and oscilloscope set at 20 Mhz. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSAA60W Characteristics INPUT: WWW.PHIHONG.COM AC Input Voltage Rating Over-voltage Protection 100 to 240VAC Circuit will latch; re-start after cycling AC power with 2 minutes unplugged AC Input Voltage Range 90 to 264VAC Over-current Protection Circuit will latch AC Input Frequency 47/63Hz Short Circuit Protection Auto-reset when short is removed Input Current 1.6A @ 100VAC 0.7A @ 240VAC Leakage Current ENVIRONMENTAL: Temperature Operation Non-operation 0°C to +40°C -20°C to +80°C 0.25mA Max. @ 254VAC 60Hz Humidity Inrush Current (cold) Operation 90A Max. @ 100VAC 150A Max. @ 240VAC (Cold start @ ambient 25°C) Emissions 10% to 90% FCC Class B EN55022 Class B Input Power Saving < 0.5W at no load Reliability: MTBF 50k Hr. @ ambient 25°C / output load 5.0A OUTPUT: Efficiency DC Output Connector 85% minimum average efficiency 2.1 x 5.5 mm Center Positive Hold-up Time >10mS Dimension Diagram Unit: mm