ECO-PACTM 1 Single Phase Rectifier Bridge PSB 71F IdAV VRRM trr with fast Recovery Epitaxial Diode (FRED) + Preliminary Data Sheet VRSM VDSM (V) 400 600 VRRM Type VDRM (V) 400 PSB 71F/04 600 PSB 71F/06 ~A ~N K - Symbol Test Conditions I*dAV IdAVM IFSM TC = 85 °C, ∫ i dt 2 TVJ TVJM Tstg VISOL Maximum Ratings (per module) 68 A 90 A TVJ = 45 °C t = 10 ms (50 Hz), sine 250 A VR = 0 t = 8.3 ms (60 Hz), sine 275 A TVJ = TVJM t = 10 ms (50 Hz), sine 215 A VR = 0 t = 8.3 ms (60 Hz), sine 235 A TVJ = 45 °C t = 10 ms (50 Hz), sine 315 A²s VR = 0 t = 8.3 ms (60 Hz), sine 320 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 230 A²s VR = 0 t = 8.3 ms (60 Hz), sine 230 A²s -40... + 150 150 °C °C -40... + 125 °C 50/60 Hz, RMS t = 1 min 3000 V∼ IISOL ≤ 1 mA 3600 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g t=1s Md Mounting torque Weight typ. Symbol Test Conditions IR VR = VRRM, TVJ = TVJM ≤ 1.0 mA VR = VRRM, TVJ = 25°C ≤ 0.25 mA IF = 30 A, ≤ 1.57 V 0.98 V 8 mΩ 0.9 0.23 1.2 K/W K/W K/W VF VTO rT RthJC RthJK (M4) Characteristic Value TVJ = 25 °C For power-loss calculations only per diode; DC per module per diode; DC per module IRM = 68 A = 400 - 600 V = 35 ns IF=50A; -diF/dt=100A/µs; VR=100V 0.3 K/W typ. 6 A typ. 35 ns 11.2 9.7 50 mm mm m/s² Features • • • • • • Package with DCB ceramic base plate Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 Applications • • • • Supplies for DC power equipment Input and output rectifier for high frequency Battery DC power supplies Field supply for DC motors Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Package style and outline Dimensions in mm (1mm = 0.0394“) L=0.05 mH; TVJ= 100°C trr IF=1A; -diF/dt=200A/µs; VR=30V; TVJ= 25°C ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration Data according to IEC 60747 refer to a single diode unless otherwise stated *- for resistive load at bridge output 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20