ETC RM/92025/N4/25

RM/92000/M
Compact Cylinders
Magnetic Piston
Double Acting
∅ 12 to 100 mm
● Very compact – approximately one third the basic
length of a corresponding ISO model
● Entirely manufactured from non-corrodible materials
● Magnetic piston as standard provides a wide range
of control options
Technical Data
Medium:
Compressed air, filtered, lubricated or non-lubricated
Operation:
Double acting, non-cushioned and magnetic piston
Operating Pressure:
1 to 10 bar
Operating Temperature:
-5°C* to +80°C
*Consult our Technical Service for use below +2°C
Cylinder Diameters:
12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm
Standard Strokes (short stroke version):
5, 10 mm
∅ 12 to 63 mm
15, 20, 25, 30 mm
∅ 12 to 100 mm
40, 50 mm
∅ 20 to 100 mm
Standard Strokes (long stroke version):
60, 80 mm
∅ 32 to 100 mm
100 mm
∅ 50 to 100 mm
Non-standard Strokes:
Non-standard strokes available
200 mm max.
∅ 16 to 25 mm
250 mm max.
∅ 32 and 40 mm
300 mm max.
∅ 50 to 100 mm
Materials:
Anodised aluminium alloy barrel and end caps, stainless steel
(∅ 12 to 40 mm Austenitic, ∅ 50 to 100 mm Martensitic)
piston rod, polyurethane and / or nitrile rubber seals
Ordering Information
To order a basic 80 mm bore cylinder with
a 50 mm stroke quote: RM/92080/M/50
To order a basic 100 mm bore cylinder with
a 100 mm stroke quote: RM/92100/M/100
To order mounting brackets refer to appropriate
cylinder mounting table.
Order magnetically operated switches separately.
Accessories
Switches M/40, TM/40
Switches M/41, M/42
See page
N 4.3.041.01
N 4.3.044.01
Magnetic piston
Alternative Cylinders:
See page N 1.5.141.02
9/96
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N 1.5.141.01
RM/92000/M
Alternative Cylinders
Symbol
Model (magnetic piston)
TRM/92000/M
Description
Heat resistant seals, 150°C max. (∅ 32 to 100 mm)
RM/92000/MU
Extended piston rod (max. extended piston rod up to 100 mm)
RM/92000/JM
Double ended piston rod (∅ 16 to 100 mm)
RM/92000/N2
Non-rotating piston rod (∅ 16 to 100 mm)
RM/92000/N4
Guided piston rod (∅ 16 to 100 mm)
Non-standard strokes available: 5 mm min. ∅ 16 to 40 mm
10 mm min. ∅ 50 to 100 mm
Stroke length max., see page N 1.5.141.01
Non-standard strokes available: 50 mm max. ∅ 16 mm
80 mm max. ∅ 20 and 25 mm
100 mm max. ∅ 32 to 100 mm
For combinations of alternative cylinders consult our Technical Service.
Theoretical Forces ● Air Consumption ● Torque for Cylinders RM/92000/N2
RM/92000/M
Theoretical forces (N) at 6 bar
Outstroke
Instroke
68
51
121
90
188
141
295
227
483
362
754
633
1178
990
1870
1682
3016
2721
4712
4418
∅
12
16
20
25
32
40
50
63
80
100
RM/92000/M
Air consumption (l/cm stroke)
Outstroke
Instroke
0,008
0,007
0,014
0,011
0,022
0,017
0,035
0,027
0,056
0,042
0,088
0,074
0,138
0,116
0,218
0,196
0,352
0,318
0,550
0,515
RM/92000/N2
at 6 bar
Model
RM/92016/N2
RM/92020/N2
RM/92025/N2
RM/92032/N2
RM/92040/N2
RM/92050/N2
RM/92063/N2
RM/92080/N2
RM/92100/N2
Torque max. (Nm)
0,15
0,25
0,40
0,75
0,75
1,50
1,50
2,50
2,50
Weights of Cylinders and Mountings (kg)
∅
12
16
20
25
32
40
50
63
80
100
RM/92000/M
Weight
at 0 mm
0,060
0,080
0,100
0,150
0,250
0,380
0,450
0,820
1,200
1,830
Weight
per 25 mm
0,040
0,040
0,060
0,070
0,120
0,150
0,180
0,260
0,330
0,420
RM/92000/N4
Weight
at 0 mm
0,110
0,130
0,170
0,280
0,440
0,500
0,900
1,350
2,200
Weight
per 25 mm
0,050
0,070
0,100
0,130
0,150
0,200
0,300
0,350
0,600
Style ‘B’, ‘G’
0,020
0,020
0,020
0,040
0,060
0,150
0,170
0,330
0,410
0,720
Style ‘C’
0,020
0,020
0,020
0,040
0,040
0,100
0,110
0,130
0,180
0,480
Style ‘F’
0,010
0,010
0,010
0,010
0,020
0,020
0,040
0,090
0,220
0,220
Nut
0,001
0,001
0,001
0,002
0,003
0,003
-
Stud or Adaptor
0,001
0,002
0,003
0,005
0,010
0,010
0,020
0,035
0,075
0,075
Assembly kit
0,020
0,022
0,026
0,035
0,045
0,120
0,125
0,270
0,290
0,535
Warning
These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified,
for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN.
Through misuse, age, or malfunction, components used in
fluid power systems can fail in various modes.
N 1.5.141.02
The system designer is warned to consider the failure modes of
all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment
in the event of such failure.
System designers must provide a warning to end users in the
system instructional manual if protection against a failure mode
cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with
these products.
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
9/96
RM/92000/M
Guided Piston Rod RM/92000/N4
Permissible Load and Torque
F
M
F
M-Torque (Nm)
F-Side load (N)
30
0,7
25
0,6
0,5
20
ø 25
0,4
15
ø 20
0,3
10
ø 25
5
ø 20
0,2
ø 16
0,1
ø 16
0
0
0 10
30
50
0 10
100
90
stroke (mm)
70
30
50
70
90
100
stroke (mm)
M-Torque (Nm)
F-Side load (N)
100
7
90
6
80
ø 100
ø 100
70
5
60
4
ø 80
50
3
40
ø 80
ø 63
30
ø 50
2
ø 40
1
ø 63
20
10
ø 32
0
0
0 10
9/96
ø 50
ø 40
ø 32
30
50
70
100
90
stroke (mm)
0 10
30
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
50
70
90
100
stroke (mm)
N 1.5.141.03
RM/92000/M
Basic Dimensions
RM/92000/M
Double ended piston rod
(∅ 12 to 100 mm)
(∅ 16 to 100 mm)
PL
EE
ZJ 2 + stroke
FF
**
EE
RT
PL
ZM + 2 x stroke
TG2
ZJ + stroke
WH
RM/92000/JM
E
TG1
ø JB
ø FB
ø MM h9
PF
MX
øD
X
ZH 2 + stroke
GB
Z
BG
ZH + stroke
Section X
Section Z
13
KF
2,7
** Only the 4 front holes are tapped on stroke lengths of less than:
∅ 25 and 32 mm: 5 mm, ∅ 40 and 63 mm: 15 mm (.../N2: 5 mm),
∅ 50 and 80 mm: 10 mm, ∅ 100 mm: 25 mm (.../N2: 15 mm).
Note: ∅ 12 to 20 mm feature only two side dovetails.
45
°
AF
Non-rotating piston rod
RM/92000/N2
ZJ 1 + stroke
(∅ 16 to 100 mm)
MX 1
ZH 1 + stroke
Model
92012
∅
12
AF
6
BG
9
∅D
32,5
❑E
25
EE
M5
∅ FB
3,3
FF
10
GB
3,5
∅ JB
6
KF
M3
∅ MM h9
6
MX (AF)
5
MX 1 (AF)
PF
15
PL
7
RT
M4
TG 1
17
TG 2
13
WH
4,5
ZH
24 (34)
ZH 1
ZH 2
ZJ
28,5 (38,5)
ZJ 1
ZJ 2
ZM
( ) = for stroke > 50 mm
N 1.5.141.04
92016
16
7
9
36,5
28
M5
3,3
10
3,5
6
M4
8
6
6
17
7,5
M4
20
20
5,5
24,5 (34,5)
34,5
29,5
30 (40)
40
35
41
92020
20
8
9
41,5
32
M5
3,3
10
3,5
6
M5
10
8
8
19,5
7,5
M4
23
23
6
26 (36)
36
31,5
32 (42)
42
37,5
44
92025
25
9
12
48
37
M5
4,2
10
4,5
7,5
M6
12
10
10
22
8
M5
27
27
6,5
28,5 (38,5)
38,5
34,5
35 (45)
45
41
48
92032
32
12
12
58
45
G 1/8
4,2
18
4,5
7,5
M8
16
13
13
27,5
9
M5
33
33
6,5
29 (39)
39
36,5
35,5 (45,5)
45,5
43
50
92040
40
12
16
71,5
55
G 1/8
6,8
18
6,5
10,5
M8
16
13
13
31,5
10
M8
41
41
6,5
31,5 (41,5)
41,5
39,5
38 (48)
48
46
53
92050
50
14
16
81
63
G 1/8
6,8
18
6,5
10,5
M 10
20
17
16
37
10,5
M8
48
48
8
35 (45)
45
42
43 (53)
53
50
59
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
92063
63
16
20
104
80
G 1/4
8,5
22
8,5
13,5
M 12
20
17
16
48
13
M 10
61
61
8
42,5 (52,5)
52,5
52
50,5 (60,5)
60,5
60
69
92080
80
22
20
120
94
G 1/4
8,5
22
8,5
13,5
M 16
25
22
21
57
14,5
M 10
73
73
9
47 (57)
57
56
56 (66)
66
65
74
92100
100
22
25
148,5
116,5
G 1/4
10,2
22
10,5
16,5
M 16
25
22
21
67
16
M 12
90,5
90,5
10
48,5 (58,5)
58,5
58
58,5 (68,5)
68,5
68
78
9/96
RM/92000/M
RM/92000/N4 Guided Piston Rod
ZJ + stroke
EE
GB
PL
PL
JB
BG
FB
Section Z
H
E
PF
TT
C
WH
RT
FF
13
2,7
øD
Z
ZH + stroke
Model
92016
∅
16
BG
9
C
21
∅D
36,5
❑E
28
EE
M5
∅ FB
3,3
FF
10
GB
3,5
❏H
26,5
HF
6
∅ JB
6
PF
17
PL
7,5
RT
M4
❏ TG
20
TT
M3
WH
11,5
ZH
24,5
ZJ
36
( ) = for stroke > 50 mm
92020
20
9
25
41,5
32
M5
3,3
10
3,5
30
8
6
19,5
7,5
M4
23
M3
14
26 (36)
40 (50)
45
TG
HF
92025
25
12
29,5
48
37
M5
4,2
10
4,5
35
8
7,5
22
8
M5
27
M4
14,5
28,5 (38,5)
43 (53)
92032
32
12
38
58
45
G 1/8
4,2
18
4,5
43
10
7,5
27,5
9
M5
33
M4
16,5
29 (39)
45,5 (55,5)
°
Note: ∅ 16 to 20 mm feature only two side dovetails.
92040
40
16
46,5
71,5
55
G 1/8
6,8
18
6,5
52
10
10,5
31,5
10
M8
41
M5
16,5
31,5 (41,5)
48 (58)
92050
50
16
56,5
81
63
G 1/8
6,8
18
6,5
60
12
10,5
37
10,5
M8
48
M6
20
35 (45)
55 (65)
92063
63
20
71
104
80
G 1/4
8,5
22
8,5
76
12
13,5
48
13
M 10
61
M8
20
42,5 (52,5)
62,5 (72,5)
92080
80
20
89
120
94
G 1/4
8,5
22
8,5
90
16
13,5
57
14,5
M 10
73
M 10
25
47 (57)
72 (82)
92100
100
25
110
148,5
116,5
G 1/4
10,2
22
10,5
113
20
16,5
67
16
M 12
90,5
M 12
30
48,5 (58,5)
78,5 (88,5)
Piston Rod Clevis Mounting Style ‘F’
RK
CE
CL
B
KW
CM B12
CL
KK
KF
LE
ER
KV
Model ‘F’
QM/57008/25
QM/8010/25
QM/92020/25
QM/57016/25
QM/57020/25
QM/57025/25
Stud
M/P1710/18
M/P1710/19
M/P1710/20
M/P1710/21
M/P1710/22
Nut
M/P1500/111
M/P1501/80
M/P1501/109
M/P1501/79
M/P1501/60
Adaptor
M/P71470/1
∅
12
16
20
25
32 and 40
50
A
12
16
20
25
25
29
B
12
CE
11
16
20
20
24
26
∅ CK h11
3 h9
4
5
5
6
8
❑ CL
6
8
10
10
12
14
CM B12
3
4
5
5
6
7
ER
4,5
6,5
8
8
9,5
11,5
KF
M3
M4
M5
M6
M8
M 10
KK
M3
M4
M5
M6
M8
M 10 x 1,25
KV (A/F)
6
7
8
10
13
12
KW
2
2
2,5
3
4
5
LE
5
8
10
10
12
12
RK
10
11,5
14,5
14,5
17,5
20,5
To order a piston rod clevis mounting style ‘F’ complete: ∅ 12 to 40 mm= Model ‘F’ plus Stud and Nut, ∅ 50 to 100 mm= Model ‘F’ plus Adaptor.
9/96
ø CK h11
A
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
QM/57040/25
M/P71470/2
63
35
15
40
10
20
10
16
M 12
M 12 x 1,25
13
5
20
29
QM/57063/25
M/P71470/3
80 and 100
45
20
56
14
27
14
21
M 16
M 16 x 1,5
17
5
28
36,5
N 1.5.141.05
RM/92000/M
Rear Flange Mounting Style ‘B’
Front Flange Mounting Style ‘G’
Foot Mounting Style ‘C’
E
R
MF
AH
DG
AT
TF
UF
XA + stroke
H
AO
SA + stroke
FB
W
ø AB
ø DB
ZF + stroke
TR
UL
Model ‘B’, ‘G’
QM/90012/22 QM/90016/22 QM/90020/22 QM/90025/22 QM/90032/22
Model ‘C’
QM/90012/21 QM/90016/21 QM/90020/21 QM/90025/21 QM/90032/21
∅
12
16
20
25
32
∅ AB
3,4
3,4
3,4
4,3
4,3
AH
13,5
15
16,5
20
23
AO
4
4
4
5
5
AT
9,5
9,5
9,5
12,5
12,5
∅ DB
6
6
6
7,5
7,5
DG
3,5
3,5
3,5
4,5
4,5
E
26
30
33
38
46
H
2
2
2
3
3
∅ FB
3,5
3,5
3,5
4,5
4,5
MF
5
5
5
6,5
6,5
R
18
22
25
28
36
TF
38
42
48
54
66
TR
25
32
35
41
19
UF
46
50
56
64
76
UL
33
40
43
51
46
W
- 0,5
0,5
1
0
0
ZF
33,5
35 (45)
37 (47)
41,5 (51,5)
42 (52)
SA
32
32,5 (42,5)
34 (44)
38 (48)
38,5 (48,5)
XA
32,5
34 (44)
36 (46)
39,5 (49,5)
40 (50)
Note: Dimension ‘W’ negative figures indicate that the piston rod is proud of the mounting face.
( ) = for stroke > 50 mm and non-rotating piston rod cylinders RM/92000/N2
QM/90040/22
QM/90040/21
40
6,4
28,5
6,5
16
10,5
6,5
57
4,5
6,5
9,5
43
78
21
92
56
-3
47,5 (57,5)
44,5 (54,5)
44,5 (54,5)
QM/90050/22
QM/90050/21
50
6,4
32
6,5
16
10,5
6,5
64
4,5
6,5
9,5
50
90
27
104
64
-1
52,5 (62,5)
47,5 (57,5)
49 (59)
QM/90063/22
QM/90063/21
63
8,4
41,5
8
22
13,5
8,5
81
5,5
8,5
12,5
63
110
34
128
81
- 4,5
63,5 (73,5)
58,5 (68,5)
58,5 (68,5)
QM/90080/22
QM/90080/21
80
8,4
49
8
25,5
13,5
8,5
95
5,5
8,5
12,5
77
128
44
146
95
- 3,5
68,5 (78,5)
62,5 (72,5)
64 (74)
QM/90100/22
QM/90100/21
100
10,5
59,5
9,5
28,5
16,5
10,5
118
6,5
11
12,5
98
156
56
176
118
- 2,5
71,5 (81,5)
67,5 (77,5)
68 (78)
QM/92080/55
80
20
17
QM/92100/55
100
25
19
Assembly kit
A
Section A
-B
L
SW (A/F)
B
Assembly kit
∅
L
SW (A/F)
QM/92012/55
12
10
7
N 1.5.141.06
QM/92016/55
16
10
7
QM/92020/55
20
10
7
QM/92025/55
25
10
8
QM/92032/55
32
10
8
QM/92040/55
40
15
13
QM/92050/55
50
15
13
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
QM/92063/55
63
20
17
9/96
RM/92000/M
Spares
2
Model
Spares kit
RM/92050/M
RM/92063/M
RM/92080/M
RM/92100/M
QM/92050/00
QM/92063/0
QM/92080/00
QM/92100/00
9
11
Comprising
Item
2
9
11
Description
Piston rod seal
Piston seal
Wear ring
Grease
Quantity
1
1
1
1
Note: Please quote the cylinder number when ordering spare parts. Spares are not available for ∅ 12 to 40 mm models.
9/96
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N 1.5.141.07