SDR1PHF thru SDR1WHF and SDR1PHFSMS and SDR1WHFSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 1 AMP HYPER FAST RECTIFIER Part Number/Ordering Information 1/ SDR1 __ __ __ __ 1300 ─ 1800 VOLTS 40 nsec 2/ │ │ │ └ Screening │ │ │ __ = Not Screened │ │ │ TX = TX Level │ │ │ TXV = TXV │ │ │ S = S Level │ │ │ │ │ └ Package Type __ = Axial Leaded │ │ SMS = Surface Mount Square Tab │ │ │ └ Reverse Recovery │ HF = Hyper Fast │ └ Family/Voltage P = 1300 V T = 1600 V R = 1400 V V = 1700 V S = 1500 V W = 1800 V • • • • • • • • • FEATURES: ° 4/ Hyper Fast Recovery: 40 ns Max @ 25 C Single Chip Construction PIV to 1800 Volts Low Reverse Leakage Current Hermetically Sealed For High Efficiency Applications Available in Axial and Surface Mount Versions Metallurgically Bonded 2/ TX, TXV, and S-Level Screening Available MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage SYMBOL SDR1PHF SDR1RHF SDR1SHF SDR1THF SDR1VHF SDR1WHF Rectified Forward Forward Current (Resistive Load, 60 Hz, Sine Wave, TL = 25°C, L = 1/8”) Peak Surge Current (8.3 msec Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Thermal Resistance, Junction to Lead, L = 3/8” (Axial) Junction to End Tab (SMS) NOTES: VALUE UNIT 1300 1400 1500 1600 1700 1800 Volts IO 1.0 Amp IFSM 12 Amps TOP and TSTG RθJL RθJE -65 to +175 °C 35 28 °C/W VRRM VRWM VR Axial Lead SMS 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. 5/ For information on operating curves, contact factory. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0129A DOC SDR1PHF thru SDR1WHF and SDR1PHFSMS and SDR1WHFSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS SYMBOL VALUE UNIT Instantaneous Forward Voltage Drop (IF = 1 Adc, 300- 500 μs Pulse, TA = 25°C) VF1 4.80 Vdc Instantaneous Forward Voltage Drop (IF = 1 Adc, 300- 500 μs Pulse, TA = -55°C) VF2 5.0 Vdc Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 25°C) IR1 20 μA Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 100°C) IR2 200 μA Junction Capacitance (VR = 100Vdc, TA = 25°C , f = 1MHz) CJ 20 pf trr 40 ns Maximum Reverse Recovery Time 4/ DIMENSIONS Axial Leaded Case Outline: DIM. A B C D MIN. .100” .125” .027” 1.00” NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIMENSIONS MAX. .150” .200” .033” --- Square Tab Surface Mount Case Outline: DATA SHEET #: RC0129A DIM. A B C D MIN. .135” .175” .022” .002” MAX. .155” .250” .028” --- DOC