SOLID STATE RELAY MAXIMUM LOAD CURRENT 3 A SG Series RoHS compliant n FEATURES Conforms to UL, CSA Standards Slim, SIL Terminal Type —Size: 9.0 (W) × 40.0 (L) × 20.0(H) mm —Weight: approximately 13g l High reliability, long life and maintenance free l High isolation (between input and output) —Dielectric stength: 2,500 Vrms l Internal zero cross circuit type available l Internal output surge absorber (varistor) type available. l l l RoHS compliant since date code: 6703 (July 3rd, 2006) Please see page 5 for more information n ORDERING INFORMATION [Example] SG – 12 A 03 C V L (a) (b) (c) (d) (e) (f) (g) (a) Series Name SG: SG Series (b) Nominal Voltage (Input side) (c) (d) Load Voltage Load Current (e) (f) Zero Cross Circuit Varistor (g) Input Terminal Distance 3 : 3 VDC 5: 5 VDC 12: 12 VDC 24: 24 VDC A: AC type 03: 3 A rms Nil: No zero cross tyoe C: Zero cross type Nil: No varistor type V : Internal varistor type Nil: 7.62 mm L: 5.08 mm 1 SG SERIES ■ SPECIFICATIONS Item INPUT side Nominal Voltage (DC) AC TYPE 3 A 3 V, 5 V, 12 V, 24 V Operate Range ±20% of nominal voltage Must Operate Voltage 80% of nominal voltage Must Release Voltage Minimum 1 V 3 VDC Type 130Ω ±10% 5 VDC Type Input Impedance 12 VDC Type 330Ω ±10% 1.0 kΩ ±10% 2.2 kΩ ±10% 24 VDC Type OUTPUT side Load Voltage Range 75 to 265 Vrms Maximum Load Current 3.0 Arms Minimum Load Current 10 mArms 1 Cycle Surge Current 132 A (60 Hz) Max. Off-state Leakage Current 2.5 mArms (at 100 Vrms 60 Hz) 5.0 mArms (at 200 Vrms 60 Hz) Max. Off-state Voltage Drop 1.5 Vrms Remarks CHARACTERISTIC DATA at max. load current at no zero cross type Max. Operate Time at zero cross type 1 ms 1/2 cycle + 1 ms Max. Release Time 1/2 cycle + 1 ms Insulation Resistance Minimum 1,000 MΩ (at 500 VDC) Dielectric Strength 2,500 Vrms for 1 minute for input-output Operating Temperature Range –30°C to + 85°C Storage Temperature Range –40°C to + 100°C Case Color Black Weight Approximately 13g for input-output n INSULATION Item AC 3.0A type Note Resistance (initial) Minimum 1,000 MΩ (500VDC) Input-output Surge Voltage 2,500V rms 1 min. ■ BLOCK DIAGRAM Photo-triac coupler Input terminal 1– Photo-triac coupler Input circuit ~3 Varistor 2+ AC Input/Output waveform (resistive load) CIRCUITS Snubber circuit INSULATION Trigger circuit LOAD Output terminal ~4 Source voltage of load Input signal ON OFF Load current SG SERIES ■ CHARACTERISTIC DATA SG-A03 (3.0A type) Ambient Temperature vs. Maximum Load Current Maximum Load Current (A) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -20 0 40 20 80 60 100 Ambient Temperature (ºC) ■ DIMENSIONS ● Dimensions ● PC board mounting hole layout ● Schematics (BOTTOM VIEW) SG-( ) A03 Type 40.0+0 (BOTTOM VIEW) 9.0+0 20.0+0 3 4 + INPUT ~ ~ OUTPUT 12.7 10.16 5.84 4-ø1.2 4.0 2 2.8 7.62 1 0.7 7.62 12.7 10.16 2.8 5.84 0.5 SG-( ) A03L Type 5.08 9.0+0 1 2 ~ 10.16 5.84 4 ~ OUTPUT 4-ø1.2 4.0 20.0+0 - + INPUT 3 12.7 2.8 40.0+0 0.7 5.08 12.7 10.16 5.84 2.8 0.5 Unit: mm SG SERIES ■ NOTES 1. Polarity of terminals are pre-determined. Please design accordingly. 2. If using non-Varistor enclosure type please use Varistor type as in Figure 1. 2 3 SSR 1 Load Varistor 4 Load power source SG SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. SG SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 18, 2008.