SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A SJ SERIES RoHS compliant n FEATURES UL, CSA recognized Extremely small and light weight —Size: 10.0 (W) × 20.2 (L) × 12.8 (H) mm —Weight: approximately 5.5g l High reliability, long life and maintenance free l High isolation (between input and output) —Dielectric stength: 2,500 Vrms l Compatible with JY Relay in size and terminal arrangement l RoHS compliant since date code: 6703 (July 3rd, 2006) Please see page 6 for more information l l n ORDERING INFORMATION [Example] SJ – 12 D 01 HZ R N (a) (b) (c) (d) (e) (f) (g) (a) Series Name (b) Nominal Voltage (Input side) (c) Load Voltage (d) (e) (g) (f) SJ: SJ Series 3: 3 VDC (only AC type) 5: 5 VDC 12: 12 VDC 24: 24 VDC A: AC type D: DC type 01: 1 A Load Current Kinds of Inverse Connection Protecting Element (only DC type) Nil HZ Terminal Classification Nil: Socket mounting N : PC Board mounting type Output Polarity (DC Type) Nil: Standard Polarity R: Reverse Polarity : Diode : Zener diode type 1 SJ SERIES n SPECIFICATIONS AC DC Item TYPE 1A TYPE 1A INPUT side Nominal Voltage (DC) 3 V, 5 V, 12 V, 24 V 5 V, 12 V, 24 V Operate Range ±20% of nominal voltage Must Operate Voltage 80% of nominal voltage Must Release Voltage Minimum1 V (minimum 0.5 V*) 5 VDC Type Input Impedance 12 VDC Type 1.0 kΩ ±10% 1.2 kΩ ±10% 2.0 kΩ ±10% 2.4 kΩ ±10% 3 VDC Type 24 VDC Type 120Ω ±10% *3 VDC type — 360Ω ±10% 430Ω ±10% OUTPUT side Load Voltage Range 24 to 265 Vrms 3 to 30 VDC Maximum Load Current 1.0 Arms 1.0 A Minimum Load Current 10 mArms 1 mA 1 Cycle Surge Current 50 A (60 Hz) 3 A (10 ms) Max. Off-state Leakage Current 0.75 mArms (at 100 Vrms 60Hz) 0.1 mA (at 30 VDC) 1.50 mArms (at 200 Vrms 60Hz) Max. Off-state Voltage Drop 1.2 Vrms 1 ms Max. Release Time 1/2 cycle + 1 ms Operating Temperature Range –30°C to + 85°C Storage Temperature Range –40°C to + 100°C Case Color Black Weight Approximately 5.5 g see CHARACTERISTIC DATA 1.2 V at max. load current Max. Operate Time n INSULATION Remarks 1 ms Green Item AC DC Resistance (initial) Minimum 1,000 MΩ (500VDC) Surge Voltage 2,500V rms 1 min. Note Input - Output n SAFETY STANDARD AND FILE NUMBERS Type Compliance Contact rating UL UL 478, UL 508 E 45026 CSA C22.2 No. 14 LR 35579 Flammability: UL 94-V0 (plastics) [SJ-C ( ) A01] 1A, 265VAC (resistive) [SJ-( ) D01] 1A, 30VDC (resistive) SJ SERIES n BLOCK DIAGRAM Input/Output waveform (resistive load) LOAD INSULATIONCIRCUITS DC Photo-transistor coupler 8+ Input terminal 9Ð Photo-transistor coupler Input circuit Varistor Snubber circuit 9Ð Output terminal ~13 Inverse connection protecting diode Input circuit Output transistor Input terminal ~16 Trigger circuit Photo-triac coupler Photo-triac coupler Drive circuit AC 8+ +16 Output terminal Source voltage of load Input signal ON OFF Load current Input signal Load current ON OFF Ð13 n CHARACTERISTIC DATA n REFERENCE DATA SJ SERIES n DIMENSIONS l Dimensions SJ-( )A Type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) Unit: mm SJ SERIES l Dimensions l PC board mounting hole layout (BOTTOM VIEW) l Schematics (BOTTOM VIEW) SJ-( )D type SJ-( )AN type SJ-( )DN type Unit: mm n SOCKET DIMENSIONS n NOTES 1. Polarity of terminals are pre-determined. Please design your circuit accordingly. 2. Socket ordering code: JK-4N 3. Standard IC socket is not recommended. Please use socket “JK-4N” Unit: mm SJ SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. SJ SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 18, 2008.