SHDC624122 SHDC624122P SHDC624122N SHDC624122D SENSITRON SEMICONDUCTOR TECHNICAL DATA, PROVISIONAL DATA ONLY DATA SHEET 4984, REV. B HERMETIC SILICON CARBIDE RECTIFIER DESCRIPTION: A 1200-VOLT, 40 AMP POWER SILICON CARBIDE RECTIFIER IN A HERMETIC TO-258 PACKAGE WITH CERAMIC SEAL FEATURES: • NO RECOVERY TIME OR REVERSE RECOVERY LOSSES • NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR • SCREENED VERSIONS ARE AVAILABLE MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 1200 Volts IO 20 Amps MAXIMUM REPETITIVE FORWARD SURGE CURRENT PER LEG (t = 8.3ms, Sine) TC = 25 OC IFRM 60 Amps MAXIMUM NON-REPETITIVE FORWARD SURGE CURREN PER LEG O (t = 10μs, pulse) TC = 25 C IFSM 250 Amps Pd 80 W MAXIMUM THERMAL RESISTANCE, Junction to Case, Per Dual Package RθJC 0.5 °C/W MAXIMUM OPERATING TEMPERATURE RANGE Top -55 to +175 °C MAXIMUM STORAGE TEMPERATURE RANGE* Tstg -55 to +200 °C PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT PER LEG (With Cathode Maintained @ TC = 65 OC) MAXIMUM POWER DISSIPATION, TC = 25 OC * Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the packaged device above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be performed to 175C. ELECTRICAL CHARACTERISTICS CHARACTERISTIC FORWARD VOLTAGE DROP PER LEG(If = 20A) Vf REVERSE CURRENT PER LEG (1200V PIV) Ir JUNCTION CAPACITANCE (Vr =400V, f = 1MHz) CT PER LEG TYP MAX. TJ = 25 °C 1.6 1.8 TJ = 175 °C 2.5 3.0 TJ = 25 °C 0.02 0.40 TJ=175 °C 0.04 2.00 mA TJ = 25 °C 140 N/A pF 100 N/A nC TOTAL CAPACITIVE CHARGE PER LEG (VR=1200V IF=10A di/dt=500A/μs TJ=25°C) QC • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • UNITS Volts SHDC624122 SHDC624122P SHDC624122N SHDC624122D SENSITRON TECHNICAL DATA, PROVISONAL DATA ONLY DATA SHEET 4984, REV. B MECHANICAL DIMENSIONS: IN Inches / mm .165 (4.19 Dia. .155 3.94) .270 (6.86 .240 6.10) .695 (17.65 .685 17.40) TO-258 .045 (1.14 .035 0.89) .835 (21.21 .815 20.70) .707 (17.96 .697 17.70) 1.302(33.07 1.20230.53) 1 2 .550 (13.97 .530 13.46) 3 .065 (1.65 .055 1.40) 3 Places .200(5.08) BSC 2 Places .140(3.56) BS PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER/COMMON CATHODE (P) DUAL RECTIFIER/COMMON ANODE (N) DUAL RECTIFIER/DOUBLER (D) PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/ CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE SCHEMATIC 1 2 SINGLE 3 1 2 3 COMMON CATHODE 1 2 3 COMMON ANODE 3 2 DOUBLER • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • 1 SENSITRON TECHNICAL DATA, PROVISONAL DATA ONLY DATA SHEET 4984, REV. B SHDC624122 SHDC624122P SHDC624122N SHDC624122D TYPICAL PERFORMANCE PER LEG Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche capabilities of the device are limited. Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially damaging conditions in their applications. DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •