SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated SMT10E Series 3.0 Vin to 5.5 Vin Single output 10 A Current rating Input voltage range: 3.0 Vdc to 5.5 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 Ideal solution where board space is at a premium or tighter card pitch is required Industry standard footprint and pin out Available RoHS compliant The SMT10E Series are non-isolated dc- designed for applications that include dc converters packaged in a single-in-line distributed power, workstations, optical footprint giving designers a cost effective network and wireless applications. solution for conversion from either a 5 V or Implemented using state of the art surface 3.3 V input to output voltages of 3.3 Vdc mount technology and automated to 0.8 Vdc. The SIL10E offers both fixed manufacturing techniques, the SIL10E outputs and wide a output trim range, offers compact size and efficiencies of up which allows maximum design flexibility to 96%. and a pathway for future upgrades. Local voltage conversion by the SMT10E Series from existing 5 V or 3.3 V system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SIL10E is [ 2 YEAR WARRANTY ] 1 File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated Stresses in excess of the maximum ratings can cause permanent damage to the device. Operation of the device is not implied at these or any other conditions in excess of those given in the specification. Exposure to absolute maximum ratings can adversely affect device reliability. Absolute Maximum Ratings Characteristic Symbol Min Typ Max Units Notes and Conditions Input voltage - continuous Vin (cont) -0.3 5.5 V DC Vin(+) - Vin(-) Input voltage - peak/surge Vsurge -0.3 6 V DC 2s max, non-repetitive Operating temperature Top -40 100 ºC Measured at thermal reference points, See Note 1 for thermal Derating Storage temperature Tstorage -40 125 ºC Output power (S1V2) Pout (max) 0 13.2 W Output power (S1V5) Pout (max) 0 16.5 W Output power (S1V8) Pout (max) 0 19.8 W Output power (S2V5) Pout (max) 0 27.5 W Output power (S3V3) Pout (max) 0 36.3 W Output power (W3V3) Pout (max) 0 36.3 W All specifications are typical at nominal input Vin = 5V, full load under any resistive load combination at 25˚C unless otherwise stated. Input Characteristics Characteristic Symbol Min Input voltage - operating Vin (oper) lin lin (off) 3 Input current - no load Input current - Quiescent Typ Max Units 5 5.5 V DC 70 2 150 mA DC mA DC Inrush current (i2t) Input ripple current Vin (min) - Vin (max), enabled Converter disabled A2µs mA rms Input fuse* * Notes and Conditions 12.5 A Slowblow/antisurge HRC recommended Fuse A - S(T) 1.25 x 0.25 inches SIBA P/N 70-065-65/12.5ARS Turn On/Off Characteristic Symbol Min Typ Max Units Notes and Conditions Input voltage - turn on Vin (on) 2.25 2.70 3 V DC Turn on delay - enabled, then power applied Tdelay (power) 20 msec Turn on delay - power applied, then enabled Tdelay (enable) 20 msec Will regulate @ Vin >3V if Vout ≤ 2V5 With the enable signal asserted, this is the time from when the input voltage reaches the minimum specified operating voltage until the output voltage is within the total regulation band Vin = Vin (nom), then enabled. This is the time taken until the output voltage is within the total error band Rise time Trise 15 msec 2 From 10% to 90%; full resistive load, no external capacitance File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated Signal Electrical Interface Characteristic - Signal Name Symbol Min At remote/control ON/OFF pin Open collector or equivalent compatible Control pin open circuit voltage Vih High level input current Iih High level input voltage Vih Acceptable high level leakage current Iih (leakage) Low level input voltage ViI Low level input current IiI Typ Max 0 300 Notes and Conditions V See Notes 2 and 3 See Application Note 134 for Remote ON/OFF details Iih = 0 µA; open circuit voltage µA Current flowing into control pin when pin is pulled high Vin Converter guaranteed OFF when control pin is greater than Vih (min) -10 µA Acceptable leakage current from control pin into the open collector driver (neg = from converter) 0.5 V Converter guaranteed ON when control pin is less than Vil (max) 20 µA Vil = < 0.4 V Max Units Notes and Conditions 1.2 0 Units Reliability and Service Life Characteristic Symbol Min Mean time between failure MTBF 680,000 Hours MIL-HDBK-217F, Vin = Vin (nom); Iout = Iout (max); ambient 25ºC; ground benign environment Mean time between failure MTBF 7,042,000 Hours Telcordia SR-332 Mean time between failure MTBF TBA Hours Demonstrated. This entry will be periodically updated as the number of test hours increase 3 www.artesyn.com Typ File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated Other Specifications Characteristic Symbol Switching frequency Fsw Min Typ Max Units Notes and Conditions 300 kHz Fixed frequency Weight 6.3 g Coplanarity 100 µm Measured from seating plane EMC Electromagnetic Compatibility Phenomenon Port Standard Test level Criteria Notes and conditions 6kV contact 8kV air NP As per ETS 300 386-1 table 5 Immunity: Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 ESD Enclosure EN61000-4-2 Performance criteria: NP: Normal Performance: EUT shall withstand applied test and operate within relevant limits as specified without damage. RP: Reduced Performance: EUT shall withstand applied test. Reduced performance is permitted within specified limits, resumption to normal performance shall occur at the cessation of the test. LFS: Loss of Function (self recovery): EUT shall withstand applied test without damage, temporary loss of function permitted during test. Unit will self recover to normal performance after test. Referenced ETSI standards: ETS 300 386-1 table 5 (1997): Public telecommunication network equipment, EMC requirements ETS 300 132-2 (1996): Power supply interface at the input to telecommunication equipment: Part 2 operated by direct current (DC) ETR 283 (1997): Transient voltages at interface A on telecommunication direct current (DC) power distributions 4 File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated Safety Agency Approvals Characteristic Notes and Conditions UL/cUL60950 File No. E174104 TÜV Product Services EN60950 B03 10 38572 037 CB certficate and report to IEC60950 DE3-51686M1 Material Ratings Characteristic - Signal Name Notes and Conditions Flammability rating UL94V-0 Model Numbers Model Number Input Voltage - Output Voltage Output Current (Max.) Typical Efficiency Max. Load Regulation SMT10E-05S1V2J SMT10E-05S1V5J SMT10E-05S1V8J SMT10E-05S2V5J SMT10E-05S3V3J 3.0 3.0 3.0 3.0 4.5 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 1.2V 1.5V 1.8V 2.5V 3.3V 10A 10A 10A 10A 10A 89% 90% 92% 95% 96% 1.0% 1.0% 1.0% 1.0% 1.0% SMT10E-05W3V3J 3.0 - 5.5VDC 3.3V 10A 96% 1.0% RoHS Compliance Ordering Information The ‘J’ at the end of the part number indicates that the part is Pb-free (RoHS 6/6 compliant). TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 5 www.artesyn.com File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated S1V2 Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 2.7 2.8 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 150 mA rms Iout = Iout (max.), measured without external filter Input capacitance internal filter Cinput 18.8 µF Internal to converter Input capacitance external bypass Cbypass 100 µF Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 1.16 1.2 1.24 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 1.14 1.25 V DC For all line, static load and temperature until end of life 0.5 % Iout = Iout (nom); Vin (min) to Vin (max) 1.0 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 20 A rms S1V2 Model Electrical Characteristics - O/P Line regulation 0.2 Load regulation Output current continuous Iout Output current - short circuit Isc 0 10 Continuous, unit auto recovers from short, Vo < 100mV Output voltage - noise 6 Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth: 20MHz. See Application Note mV rms 168 for measurement set-up details File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated S1V2 Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 60 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/µsec Measurement taken with no external capacitors 50 µsec Settling time to within 1% of output set point voltage for 50% to 75% step load. Measurement taken with no external capacitors 10,000 µF Max Units Notes and Conditions 10 % % Trim up (% of Vo nom). Trim down (% of Vo nom) S1V2 Model Protection and Control Features Characteristic Typ Allowable output voltage* 10 See Application Note 168 for details of trim equations and trim curves Remote sense voltage 10 % If trim up is invoked de-rate power accordingly (remote sense + trim ≤ 10%) Max Units Notes and Conditions *Vin (min) = 3.3V at max. trim-up S1V2 Model Efficiency Characteristic Symbol Min Typ Efficiency η 86.0 89.0 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency η 86.0 89.0 % Iout = 50% Iout (max), Vin = Vin (nom) 7 www.artesyn.com File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated S1V5 Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 3.3 3.4 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 150 mA rms Iout = Iout (max.), measured without external filter Input capacitance internal filter Cinput 18.8 µF Internal to converter Input capacitance external bypass Cbypass 100 µF Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 1.45 1.5 1.55 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 1.42 1.57 V DC For all line, static load and temperature until end of life 0.5 % Iout = Iout (nom); Vin (min) to Vin (max) 1.0 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 20 A rms S1V5 Model Electrical Characteristics - O/P Line regulation 0.2 Load regulation Output current continuous Iout Output current - short circuit Isc 0 10 Continuous, unit auto recovers from short, Vo < 100mV Output voltage - noise 8 Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth: 20MHz. See Application Note mV rms 168 for measurement set-up details File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated S1V5 Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 60 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/µsec Measurement taken with no external capacitors 50 µsec Settling time to within 1% of output set point voltage for 50% to 75% step load. Measurement taken with no external capacitors 10,000 µF Max Units Notes and Conditions 10 % % Trim up (% of Vo nom). Trim down (% of Vo nom) See Application Note 168 for details of trim equations and trim curves 10 % If trim up is invoked de-rate power accordingly (remote sense + trim ≤ 10%) Max Units Notes and Conditions S1V5 Model Protection and Control Features Characteristic Typ Allowable output voltage* 10 Remote sense voltage *Vin (min) = 3.3V at max. trim-up S1V5 Model Efficiency Characteristic Symbol Min Typ Efficiency η 88.0 90.0 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency η 88.0 90.0 % Iout = 50% Iout (max), Vin = Vin (nom) 9 www.artesyn.com File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated S1V8 Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 3.9 4.1 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 150 mA rms Iout = Iout (max.), measured without external filter Input capacitance internal filter Cinput 18.8 µF Internal to converter Input capacitance external bypass Cbypass 100 µF Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 1.75 1.8 1.86 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 1.72 1.88 V DC For all line, static load and temperature until end of life 0.5 % Iout = Iout (nom); Vin (min) to Vin (max) 1.0 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 20 A rms S1V8 Model Electrical Characteristics - O/P Line regulation 0.2 Load regulation Output current continuous Iout Output current - short circuit Isc 0 10 Continuous, unit auto recovers from short, Vo < 100mV Output voltage - noise 10 Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth: 20MHz. See Application Note mV rms 168 for measurement set-up details File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated S1V8 Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 60 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/µsec Measurement taken with no external capacitors 50 µsec Settling time to within 1% of output set point voltage for 50% to 75% step load. Measurement taken with no external capacitors 10,000 µF Max Units Notes and Conditions 10 % Trim up (% of Vo nom). Trim down (% of Vo nom) See Application Note 168 for details of trim equations and trim curves S1V8 Model Protection and Control Features Characteristic Typ Allowable output voltage* 10 % Remote sense voltage 10 % If trim up is invoked de-rate power accordingly (remote sense + trim ≤ 10%) *Vin (min) = 3.3V at max. trim-up S1V8 Model Efficiency Characteristic Symbol Min Typ Efficiency η 89.5 Efficiency η 89.0 11 www.artesyn.com Max Units Notes and Conditions 92.0 % Iout = 100% Iout (max), Vin = Vin (nom) 91.5 % Iout = 50% Iout (max), Vin = Vin (nom) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated S2V5 Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 5.3 5.45 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 200 mA rms Iout = Iout (max.), measured without external filter Input capacitance internal filter Cinput 18.8 µF Internal to converter Input capacitance external bypass Cbypass 100 µF Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 2.43 2.5 2.57 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 2.38 2.612 V DC For all line, static load and temperature until end of life 0.5 % Iout = Iout (nom); Vin (min) to Vin (max) 1.0 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 20 A rms S2V5 Model Electrical Characteristics - O/P Line regulation 0.2 Load regulation Output current continuous Iout Output current - short circuit Isc 0 10 Continuous, unit auto recovers from short, Vo < 100mV Output voltage - noise 12 Vp-p Vrms 60 25 mV pk-pk Measurement bandwidth: 20MHz. See Application Note mV rms 168 for measurement set-up details File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated S2V5 Model Electrical Characteristics - O/P Characteristic Symbol Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Min Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/µsec Measurement taken with no external capacitors 50 µsec Settling time to within 1% of output set point voltage for 50% to 75% step load. Measurement taken with no external capacitors 10,000 µF Max Units Notes and Conditions 10 % % Trim up (% of Vo nom). Trim down (% of Vo nom) See Application Note 168 for details of trim equations and trim curves 10 % If trim up is invoked de-rate S2V5 Model Protection and Control Features Characteristic Typ Allowable output voltage* 10 Remote sense voltage power accordingly (remote sense + trim ≤ 10%) *Vin (min) =3.3V at max. trim-up S2V5 Model Efficiency Units Notes and Conditions 95.0 % Iout = 100% Iout (max), Vin = Vin (nom) 90.0 % Iout = 50% Iout (max), Vin = Vin (nom) Characteristic Symbol Min Typ Efficiency η 92.5 Efficiency η 91.5 13 www.artesyn.com Max File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated S3V3 Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 6.9 7.1 ADC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 150 mA rms Iout = Iout (max.), measured without external filter Input capacitance internal filter Cinput 18.8 µF Internal to converter Input capacitance external bypass Cbypass 100 µF Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom.) 3.21 3.3 3.39 VDC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 3.15 3.45 VDC For all line, static load and temperature until end of life 0.5 % Iout = Iout (nom); Vin (min) to Vin (max) 1 % Vin = Vin (nom); Iout (min) to Iout (max) 10 ADC 20 A rms 50 mV pk-pk Measurement bandwidth 20MHz 25 mV rms S3V3 Model Electrical Characteristics - O/P Line regulation 0.2 Load regulation Output current continuous Iout Output current - short circuit Isc Output voltage - noise Vp-p Vrms 14 0 10 Continuous, unit auto recovers from short, Vo < 100mV See Application Note 168 for set-up details File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated S3V3 Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/µsec Measurement taken with no external capacitors 50 µsec Settling time to within 1% of output set point voltage for 50% to 75% step load. Measurement taken with no external capacitors 10,000 µF Max Units Notes and Conditions 10 % % Trim up (% of Vo nom). Trim down (% of Vo nom) S3V3 Model Protection and Control Features Characteristic Typ Allowable output voltage 10 See Application Note 168 for details of trim equations and trim curves Remote sense voltage 10 % If trim up is invoked de-rate power accordingly (remote sense + trim ≤ 10%) Max Units Notes and Conditions S3V3 Model Efficiency Characteristic Symbol Min Typ Efficiency η 93.5 96.0 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency η 93.5 95.3 % Iout = 50% Iout (max), Vin = Vin (nom) 15 www.artesyn.com File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated W3V3 Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 7.0 8.0 ADC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 150 mA rms Iout = Iout (max.), measured without external filter Input capacitance internal filter Cinput 18.8 µF Internal to converter Input capacitance external bypass Cbypass 100 µF Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom.) 3.21 3.3 3.39 VDC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 3.15 3.45 VDC For all line, static load and temperature until end of life 0.5 % Iout = Iout (nom); Vin (min) to Vin (max) 1 % Vin = Vin (nom); Iout (min) to Iout (max) 10 ADC 20 A rms 50 mV pk-pk Measurement bandwidth 20MHz 25 mV rms W3V3 Model Electrical Characteristics - O/P Line regulation 0.2 Load regulation Output current continuous Iout Output current - short circuit Isc Output voltage - noise Vp-p Vrms 16 0 10 Continuous, unit auto recovers from short, Vo < 100mV See Application Note 168 for set-up details File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated W3V3 Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/µsec Measurement taken with no external capacitors 50 µsec Settling time to within 1% of output set point voltage for 50% to 75% step load. Measurement taken with no external capacitors 10,000 µF Max Units Notes and Conditions 10 % % Trim up (% of Vo nom). Trim down (% of Vo nom) See Application Note 168 for details of trim equations and trim curves 10 % If trim up is invoked de-rate power accordingly (remote W3V3 Model Protection and Control Features Characteristic Typ Allowable output voltage 75 Remote sense voltage sense + trim ≤ 10%) W3V3 Model Efficiency Characteristic Symbol Min Typ Efficiency η 94.0 Efficiency η 94.0 17 www.artesyn.com Max Units Notes and Conditions 96.0 % Iout = 100% Iout (max), Vin = Vin (nom) 95.0 % Iout = 50% Iout (max), Vin = Vin (nom) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated 10 95 7.5 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 2 m/s (400 LFM) 5 2.5 0 85 75 Vin = 3V0 Vin = 5V Vin = 5V5 65 55 45 70 75 80 85 90 95 100 AMBIENT TEMPERATURE (ºC) 18 EFFICIENCY (%) OUTPUT CURRENT (A) S1V2 Model 0 2 4 6 8 10 OUTPUT CURRENT (A) Figure 1: Derating Curve with Vin = 5V and Vout = 1.2V Figure 2: Efficiency vs Load Figure 3: Short Circuit Characteristic (Channel 1: Is/c) Figure 4: Typical Transient Response 75% - 100% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 5: Typical Transient Response 100% - 75% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 6: Typical Power-up Characteristic (Channel 1: Vo, Channel 2: Vin) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated S1V2 Model Figure 7: Control On/Off Characteristic (Channel 1: Vo, Channel 2: Remote ON/OFF) 19 www.artesyn.com Figure 8: Typical Ripple and Noise (Channel 3: Vo) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated 10 95 7.5 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 2 m/s (400 LFM) 5 2.5 0 85 75 Vin = 3V0 Vin = 5V Vin = 5V5 65 55 45 70 75 80 85 90 95 100 AMBIENT TEMPERATURE (ºC) 20 EFFICIENCY (%) OUTPUT CURRENT (A) S1V5 Model 0 2 4 6 8 10 OUTPUT CURRENT (A) Figure 9: Derating Curve with Vin = 5V and Vout = 1.5V Figure 10: Efficiency vs Load Figure 11: Short Circuit Characteristic (Channel 1: Is/c) Figure 12: Typical Transient Response 75% - 100% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 13: Typical Transient Response 100% - 75% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 14: Typical Power-up Characteristic (Channel 1: Vo, Channel 2: Vin) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated S1V5 Model Figure 15: Control On/Off Characteristic (Channel 1: Vo, Channel 2: Remote ON/OFF) 21 www.artesyn.com Figure 16: Typical Ripple and Noise (Channel 3: Vo) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated 10 95 7.5 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 2 m/s (400 LFM) 5 2.5 0 85 75 Vin = 3V0 Vin = 5V Vin = 5V5 65 55 45 70 75 80 85 90 95 100 AMBIENT TEMPERATURE (ºC) 22 EFFICIENCY (%) OUTPUT CURRENT (A) S1V8 Model 0 2 4 6 8 10 OUTPUT CURRENT (A) Figure 17: Derating Curve with Vin = 5V and Vout = 1.8 Figure 18: Efficiency vs Load Figure 19: Short Circuit Characteristic (Channel 1: Is/c) Figure 20: Typical Transient Response 75% - 100% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 21: Typical Transient Response 100% - 75% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 22: Typical Power-up Characteristic (Channel 1: Vo, Channel 2: Vin) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated S1V8 Model Figure 23: Control On/Off Characteristic (Channel 1: Vo, Channel 2: Remote ON/OFF) 23 www.artesyn.com Figure 24: Typical Ripple and Noise (Channel 3: Vo) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated 10 100 8 6 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 4 2 0 95 Vin = 4V5 Vin = 5V Vin = 5V5 90 85 80 70 75 80 85 90 95 100 105 AMBIENT TEMPERATURE (ºC) 24 EFFICIENCY (%) OUTPUT CURRENT (A) S2V5 Model 0 2 4 6 8 10 OUTPUT CURRENT (A) Figure 25: Derating Curve with Vin = 5V and Vout = 2.5V Figure 26: Efficiency vs Load Figure 27: Short Circuit Characteristic (Channel 1: Is/c) Figure 28: Typical Transient Response 75% - 100% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 29: Typical Transient Response 100% - 75% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 30: Typical Power-up Characteristic (Channel 1: Vo, Channel 2: Vin) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated S2V5 Model Figure 31: Control On/Off Characteristic (Channel 1: Vo, Channel 2: Remote ON/OFF) 25 www.artesyn.com Figure 32: Typical Ripple and Noise (Channel 3: Vo) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated 10 100 8 6 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 4 2 0 95 Vin = 4.5V Vin = 5.0V Vin = 5.5V 90 85 80 70 75 80 85 90 95 100 105 AMBIENT TEMPERATURE (ºC) 26 EFFICIENCY (%) OUTPUT CURRENT (A) S3V3 Model 0 2.5 5 7.5 10 OUTPUT CURRENT (A) Figure 33: Derating Curve with Vin = 5V and Vout = 3.3V Figure 34: Efficiency vs Load Figure 35: Short Circuit Characteristic (Channel 4: Io) Figure 36: Typical Transient Response 75% - 100% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 37: Typical Transient Response 100% - 75% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 38: Typical Power-up Characteristic (Channel 1: Vo, Channel 2: Vin) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated S3V3 Model Figure 39: Control On/Off Characteristic (Channel 1: Vo, Channel 2: Remote ON/OFF) 27 www.artesyn.com Figure 40: Typical Ripple and Noise (Channel 3: Vo) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated 10 100 8 6 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 4 2 0 95 Vin = 4.5V Vin = 5.0V Vin = 5.5V 90 85 80 70 75 80 85 90 95 100 105 AMBIENT TEMPERATURE (ºC) 28 EFFICIENCY (%) OUTPUT CURRENT (A) W3V3 Model 0 2.5 5 7.5 10 OUTPUT CURRENT (A) Figure 41: Derating Curve with Vin = 5V and Vout = 3.3V Figure 42: Efficiency vs Load Figure 43: Short Circuit Characteristic (Channel 4: Io) Figure 44: Typical Transient Response 75% - 100% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 45: Typical Transient Response 100% - 75% Step Load Change (Channel 1: Vo, Channel 4: Io) Figure 46: Typical Power-up Characteristic (Channel 1: Vo, Channel 2: Vin) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated WV3 Model Figure 47: Control On/Off Characteristic (Channel 1: Vo, Channel 2: Remote ON/OFF) 29 www.artesyn.com Figure 48: Typical Ripple and Noise (Channel 3: Vo) File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SXA10 Series |Converter 15W DC/DC SMT10E Series | 10 A DC-DC E Class Non-Isolated TOP VIEW 0.039 (1.00) 0.530 ±0.010 (13.46 ± 0.25) 0.039 (1.00) BOTTOM VIEW 4 3 2 1 6 SIDE VIEW 0.048 (1.22) 0.323 (8.21) Installed Ht. 0.007 (0.18) Min Clearance 0.405 (10.29) 0.430 (10.92) 5 0.297 (7.54) 0.075 (1.91) 0.310 (7.87) 1.300±0.010 (33.02 ±0.25) 0.190 (4.83) 0.190 (4.83) 0.190 (4.83) Seating Plane Max. component Connector (6PL) Width :0.112 ± 0.003 (2.84 ± 0.08) Length: 0.062 ± 0.002 (1.57 ± 0.04) All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) unless otherwise stated Pin Connections Pin No. Function 1 2 3 4 5 6 Remote ON/OFF Remote Sense + Trim +Vout Ground +Vin Figure 49: Mechanical Drawing and Pinout Table 30 File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated Note 1 Thermal reference is defined as the highest temperature measured at any one of the specified thermal reference points. See Figure 50: Thermal reference points. Case Temperature should not exceed 115ºC Note 2 The Remote ON/OFF pin is referenced to ground. Note 3 The SMT10E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT10E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off >1.2V] Converter Operation Unit is ON Unit is ON Unit is OFF A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘-R’ at the end of the model number, e.g. SMT10E-05W3V3-RJ. Direction of Airflow Figure 50: Thermal Reference Points Note 4 Thermal reference set up: Unit mounted on an edge card test board 203mm x 190mm. Test board mounted vertically. For test details and recommended set-up see Application Note 168. CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is accessible only to trained personnel. The user must provide the recommended fusing in order to comply with safety approvals. 31 www.artesyn.com File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006 SMT10E Series | 10 A DC-DC Converter E Class Non-Isolated NORTH AMERICA e-mail: [email protected] % 800 769 7274 %+ 508 628 5600 EUROPEAN LOCATIONS e-mail: [email protected] IRELAND %+ 353 24 93130 AUSTRIA %+ 43 1 80150 FAR EAST LOCATIONS e-mail: [email protected] HONG KONG %+ 852 2699 2868 Longform Datasheet Artesyn Technologies® 2006 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. 32 www.artesyn.com File Name: lf_smt10e_05.pdf Rev (02): 04 Jan 2006