SN54BCT25244, SN74BCT25244 25-Ω OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS064A – JUNE 1990 – REVISED NOVEMBER 1993 • • • • • SN54BCT25244 . . . JT OR W PACKAGE SN74BCT25244 . . . DW OR NT PACKAGE (TOP VIEW) State-of-the-Art BiCMOS Design Significantly Reduces ICCZ ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) Designed to Facilitate Incident-Wave Switching for Line Impedances of 25 Ω or Greater Distributed VCC and GND Pins Minimize Noise Generated by the Simultaneous Switching of Outputs Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK) and Flatpacks (W), and Standard Plastic and Ceramic 300-mil DIPs (JT, NT) 1Y1 GND 1Y2 1Y3 GND 1Y4 2Y1 GND 2Y2 2Y3 GND 2Y4 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 1OE 1A1 1A2 VCC 1A3 1A4 2A1 2A2 VCC 2A3 2A4 2OE SN54BCT25244 . . . FK PACKAGE (TOP VIEW) 1A4 2A1 2A2 NC VCC 2A3 2A4 description These 25-Ω octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. 4 1A3 VCC 1A2 NC 1A1 1OE 1Y1 3 2 1 28 27 26 25 6 24 7 23 8 22 9 21 10 20 19 11 12 13 14 15 16 17 18 2OE 2Y4 GND NC 2Y3 2Y2 GND GND 1Y2 1Y3 NC GND 1Y4 2Y1 These buffers are capable of sinking 188-mA IOL, which facilitates switching 25-Ω transmission lines on the incident wave. The distributed VCC and GND pins minimize switching noise for more reliable system operation. 5 When the output-enable (1OE and 2OE) inputs are low, the device transmits data from the A inputs to the Y outputs. When 1OE and 2OE are high, the outputs are in the high-impedance state. NC – No internal connection The SN54BCT25244 is characterized for operation over the full military temperature range of – 55°C to 125°C. The SN74BCT25244 is characterized for operation from 0°C to 70°C. FUNCTION TABLE (each buffer/driver) INPUTS OE A OUTPUT Y L H H L L L H X Z Copyright 1993, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–1 SN54BCT25244, SN74BCT25244 25-Ω OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS064A – JUNE 1990 – REVISED NOVEMBER 1993 logic symbol† 1OE 1A1 1A2 1A3 1A4 24 logic diagram (positive logic) 1OE EN 23 1 22 1 3 20 4 19 6 1Y1 1A1 13 1Y3 1A2 2A2 2A3 2A4 18 EN 17 1 7 9 15 10 14 12 1 22 3 20 4 1Y3 19 6 1Y4 1Y1 1Y2 1Y4 1A4 2A1 23 1Y2 1A3 2OE 24 2Y1 2Y2 2Y3 2OE 13 2Y4 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 2A1 2A2 2A3 2A4 18 7 17 9 15 10 14 12 2Y1 2Y2 2Y3 2Y4 Pin numbers shown are for the DW, JT, NT, and W packages. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡ Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Voltage range applied to any output in the disabled or power-off state, VO . . . . . . . . . . . . . . . . – 0.5 V to 5.5 V Voltage range applied to any output in the high state, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 30 mA Current into any output in the low state, IO: SN54BCT25244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mA SN74BCT25244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376 mA Operating free-air temperature range: SN54BCT25244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C SN74BCT25244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C ‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2–2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54BCT25244, SN74BCT25244 25-Ω OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS064A – JUNE 1990 – REVISED NOVEMBER 1993 recommended operating conditions (see Note 2) SN54BCT25244 SN74BCT25244 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL IIK Low-level input voltage 0.8 0.8 V Input clamp current –18 –18 mA IOH IOL High-level output current – 53 – 80 mA 188 mA 70 °C High-level input voltage 2 2 Low-level output current V 125 TA Operating free-air temperature NOTE 2: Unused or floating inputs must be held high or low. – 55 125 V 0 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VOH VOL TEST CONDITIONS VCC = 4.5 V, VCC = 4.75 V, II = –18 mA IOH = – 3 mA VCC = 4 4.5 5V IOH = – 53 mA IOH = – 80 mA VCC = 4.5 V SN54BCT25244 MIN TYP† MAX SN74BCT25244 MIN TYP† MAX –1.2 –1.2 V 2.7 V 2 2 IOL = 94 mA IOL = 125 mA 0.38 0.55 0.42 0.55 V 0.8 IOL = 188 mA VI = 5.5 V 0.7 II IIH VCC = 5.5 V, VCC = 5.5 V, IIL IOZH VCC = 5.5 V, VCC = 5.5 V, IOZL ICCL VCC = 5.5 V, VCC = 5.5 V, Outputs open 90 119 ICCH ICCZ VCC = 5.5 V, VCC = 5.5 V, Outputs open 59 78 7 11 Ci VCC = 5 V, VCC = 5 V, VI = 2.5 V or 0.5 V VO = 2.5 V or 0.5 V Co UNIT VI = 2.7 V VI = 0.5 V VO = 2.7 V VO = 0.5 V Outputs open 0.1 0.1 mA 20 20 µA – 0.6 – 0.6 mA 50 50 µA – 50 – 50 µA 90 119 mA 59 78 mA 7 11 mA 5.5 5.5 pF 17 17 pF † All typical values are at VCC = 5 V, TA = 25°C. switching characteristics over recommended ranges of supply voltage and operating free-air temperature, CL = 50 pF (unless otherwise noted) (see Note 3) FROM (INPUT) TO (OUTPUT) tPLH tPHL A Y tPZH tPZL OE Y tPHZ tPLZ OE Y PARAMETER VCC = 5 V, TA = 25°C SN54BCT25244 SN74BCT25244 MIN TYP MAX MIN MAX MIN MAX 1 3.2 4.9 1 5.6 1 5.5 2 4 5.6 2 6.3 2 6 3.2 5.6 8.5 3.2 9.7 3.2 9.3 3.7 6.3 9.2 3.7 10.4 3.7 10.2 1.6 3.6 5.5 1.6 6.5 1.6 6.3 3.1 5.3 7.8 3.1 9.5 3.1 8.4 UNIT ns ns ns NOTE 3: Load circuits and voltage waveforms are shown in Section 1. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–3 SN54BCT25244, SN74BCT25244 25-Ω OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS064A – JUNE 1990 – REVISED NOVEMBER 1993 2–4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated