SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003
D Meet or Exceed Standards TIA/EIA-422-B
D
D
D
D
D
D
D
D
D
D
SN65C1167 . . . DB OR NS PACKAGE
SN75C1167 . . . DB, N, OR NS PACKAGE
(TOP VIEW)
and ITU Recommendation V.11
BiCMOS Process Technology
Low Supply-Current Requirements:
9 mA Max
Low Pulse Skew
Receiver Input Impedance . . . 17 kΩ Typ
Receiver Input Sensitivity . . . ±200 mV
Receiver Common-Mode Input Voltage
Range of −7 V to 7 V
Operate From Single 5-V Power Supply
Glitch-Free Power-Up/Power-Down
Protection
Receiver 3-State Outputs Active-Low
Enable for SN65C1167 and SN75C1167 Only
Improved Replacements for the MC34050
and MC34051
1B
1A
1R
RE
2R
2A
2B
GND
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
1D
1Y
1Z
DE
2Z
2Y
2D
SN65C1168 . . . N, NS, OR PW PACKAGE
SN75C1168 . . . DB, N, NS, OR PW PACKAGE
(TOP VIEW)
1B
1A
1R
1DE
2R
2A
2B
GND
description/ordering information
The SN65C1167, SN75C1167, SN65C1168,
and SN75C1168 dual drivers and receivers are
integrated circuits designed for balanced
transmission
lines.
The
devices
meet
TIA/EIA-422-B and ITU recommendation V.11.
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
1D
1Y
1Z
2DE
2Z
2Y
2D
ORDERING INFORMATION
0°C to 70°C
TOP-SIDE
MARKING
PDIP (N)
Tube
SN75C1167N
SN75C1167N
SOP (NS)
Tape and reel
SN75C1167NSR
75C1167
SSOP (DB)
Tape and reel
SN75C1167DBR
CA1167
PDIP (N)
Tube
SN75C1168N
SN75C1168N
SOP (NS)
Tape and reel
SN75C1168NSR
75C1168
SSOP (DB)
Tape and reel
SN75C1168DBR
CA1168
Tube
SN75C1168PW
Tape and reel
SN75C1168PWR
SOP (NS)
Tape and reel
SN65C1167NSR
65C1167
SSOP (DB)
Tape and reel
SN65C1167DBR
CB1167
PDIP (N)
Tube
SN65C1168N
SN65C1168N
SOP (NS)
Tape and reel
SN65C1168NSR
65C1168
Tube
SN65C1168PW
Tape and reel
SN65C1168PWR
TSSOP (PW)
−40°C to 85°C
ORDERABLE
PART NUMBER
PACKAGE†
TA
TSSOP (PW)
CA1168
CB1168
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2003, Texas Instruments Incorporated
!" #!$% &"'
&! #" #" (" " ") !"
&& *+' &! #", &" ""%+ %!&"
", %% #""'
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003
description/ordering information (continued)
The SN65C1167 and SN75C1167 combine dual 3-state differential line drivers and 3-state differential line
receivers, both of which operate from a single 5-V power supply. The driver and receiver have active-high and
active-low enables, respectively, which can be connected together externally to function as direction control.
The SN65C1168 and SN75C1168 drivers have individual active-high enables.
Function Tables
EACH DRIVER
OUTPUTS
INPUT
D
ENABLE
DE
H
H
H
L
L
H
L
H
X
L
Z
Z
Y
Z
SN75C1167, EACH RECEIVER
DIFFERENTIAL INPUTS
A−B
ENABLE
RE
OUTPUT
R
VID ≥ 0.2 V
−0.2 V < VID < 0.2 V
L
H
L
?
VID ≤ −0.2 V
X
L
L
H
Z
Open
L
H
H = high level, L = low level, ? = indeterminate,
X = irrelevant, Z = high impedance (off)
logic diagram (positive logic)
SN65C1167/SN75C1167
DE
SN65C1168, SN75C1168
12
4
1DE
15
4
1D
RE
1D
15
3
1R
9
2D
5
2R
2
14
13
2
1
10
11
6
7
1Y
1Z
1A
3
1R
2D
9
2R
5
2Z
2A
2B
POST OFFICE BOX 655303
13
2
1
12
2DE
1B
2Y
14
• DALLAS, TEXAS 75265
10
11
6
7
1Y
1Z
1A
1B
2Y
2Z
2A
2B
SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003
schematics of inputs
EQUIVALENT OF DRIVER ENABLE INPUT
EQUIVALENT OF A OR B INPUT
VCC
VCC
17 kΩ
NOM
Input
1.7 kΩ
NOM
Input
288 kΩ
NOM
1.7 kΩ
NOM
VCC (A)
or
GND (B)
GND
GND
schematics of outputs
TYPICAL OF EACH DRIVER OUTPUT
TYPICAL OF EACH RECEIVER OUTPUT
VCC
VCC
Output
Output
GND
GND
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Input voltage range, VI (A or B, Receiver) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −11 V to 14 V
Differential input voltage range, VID, Receiver (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −14 V to 14 V
Output voltage range, VO, Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −5 V to 7 V
Clamp current range, IIK or IOK, Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Output current range, IO, Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±150 mA
Supply current, ICC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mA
GND current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −200 mA
Output current range, IO, Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Operating virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Package thermal impedance, θJA (see Notes 3 and 4): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . 82°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . 108°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values except differential input voltage are with respect to the network GND.
2. Differential input voltage is measured at the noninverting terminal with respect to the inverting terminal.
3. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/θJA. Selecting the maximum of 150°C can affect reliability.
4. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
VCC
Supply voltage
VIC
Common-mode input voltage
(see Note 5)
Receiver
VID
VIH
Differential input voltage
Receiver
High-level input voltage
Except A, B
VIL
Low-level input voltage
Except A, B
IOH
High-level output current
IOL
Low-level output current
TA
Operating free-air temperature
MIN
NOM
MAX
4.5
5
5.5
V
±7
V
±7
V
2
−20
mA
6
Driver
20
SN75C1167, SN75C1168
0
70
SN65C1167, SN65C1168
−40
85
NOTE 5: Refer to TIA/EIA-422-B for exact conditions.
POST OFFICE BOX 655303
V
−6
Driver
Receiver
4
V
0.8
Receiver
UNIT
• DALLAS, TEXAS 75265
mA
°C
SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003
DRIVER SECTION
electrical characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted)
PARAMETER
VIK
VOH
Input clamp voltage
VOL
|VOD1|
Low-level output voltage
|VOD2|
Differential output voltage
∆|VOD|
Change in magnitude of differential
output voltage
TEST CONDITIONS
II = −18 mA
VIH = 2 V,
High-level output voltage
VIH = 2 V,
IO = 0 mA
Differential output voltage
VIL = 0.8 V,
VIL = 0.8 V,
IOH = −20 mA
IOL = 20 mA
MIN
TYP†
2.4
3.4
0.2
2
2
RL = 100 Ω,
VOC
Common-mode output voltage
∆|VOC|
Change in magnitude of common-mode
output voltage
IO(OFF)
Output current with power off (see Note 3)
VCC = 0 V
IOZ
High-impedance-state output current
VO = 2.5 V
VO = 5 V
IIH
IIL
High-level input current
IOS
Short-circuit output current
ICC
Supply current (total package)
UNIT
−1.5
V
V
0.4
V
6
V
3.1
See Figure 1 and Note 5
VO = 6 V
VO = −0.25 V
V
±0.4
V
±3
V
±0.4
V
100
µA
−100
µA
20
−20
VI = VCC or VIH
VI = GND or VIL
Low-level input current
MAX
1
VO = VCC or GND,
See Note 6
V
=
V
or
GND
No load,
I
CC
Enabled
VI = 2.4 or 0.5 V, See Note 7
−30
µA
A
µA
−1
µA
−150
mA
4
6
5
9
mA
Ci
Input capacitance
6
pF
† All typical values are at VCC = 5 V and TA = 25°C.
NOTES: 5. Refer to TIA/EIA-422-B for exact conditions.
6. Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.
7. This parameter is measured per input, while the other inputs are at VCC or GND.
switching characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
tPHL
tPLH
Propagation delay time, high- to low-level output
tsk(p)
Pulse skew
tr
Rise time
tf
Fall time
tPZH
Output enable time to high level
tPZL
Output enable time to low level
tPHZ
Output disable time from low level
Propagation delay time, low- to high-level output
tPLZ
Output disable time from high level
† All typical values are at VCC = 5 V and TA = 25°C.
R1 = R2 = 50 Ω,
C1 = C2 = C3 = 40 pF,
See Figure 2
R3 = 500 Ω,
S1 is open,
R1 = R2 = 50 Ω,
C1 = C2 = C3 = 40 pF,
See Figure 3
R3 = 500 Ω,
S1 is open,
R1 = R2 = 50 Ω,
C1 = C2 = C3 = 40 pF,
See Figure 4
R3 = 500 Ω,
S1 is closed,
R1 = R2 = 50 Ω,
C1 = C2 = C3 = 40 pF,
See Figure 4
R3 = 500 Ω,
S1 is closed,
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MIN
TYP†
MAX
7
12
ns
UNIT
7
12
ns
0.5
4
ns
5
10
ns
5
10
ns
10
19
ns
10
19
ns
7
16
ns
7
16
ns
5
SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003
RECEIVER SECTION
electrical characteristics over recommended ranges of common-mode input voltage, supply
voltage, and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VIT+
Positive-going input threshold voltage,
differential input
VIT−
Negative-going input threshold voltage,
differential input
TYP†
MAX
0.2
−0.2‡
Vhys
VIK
Input hysteresis (VIT+ − VIT−)
VOH
VOL
High-level output voltage
II = −18 mA
VID = 200 mV,
Low-level output voltage
VID = −200 mV,
Input clamp voltage, RE
MIN
IOZ
High-impedance-state output
current
II
Line input current
II
ri
Enable input current, RE
Input resistance
VI = VCC or GND
VIC = −7 V to 7 V,
ICC
Supply current (total package)
No load, Enabled
SN75C1167
SN75C1167
3.8
VO = VCC or GND
Other input at 0 V
mV
−1.5
IOH = −6 mA
IOL = 6 mA
4.2
V
V
0.1
0.3
V
±0.5
±5
µA
VI = 10 V
VI = −10 V
1.5
−2.5
±1
Other input at 0 V
V
V
60
SN75C1167
UNIT
4
VI = VCC or GND
VIH = 2.4 V or 0.5 V,
See Note 5
17
mA
µA
kΩ
4
6
5
9
mA
† All typical values are at VCC = 5 V and TA = 25°C.
‡ The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for common-mode
input voltage and threshold voltage levels only.
NOTE 5: Refer to TIA/EIA-422-B for exact conditions.
switching characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted) (see Note 8)
PARAMETER
TEST CONDITIONS
tPLH
tPHL
Propagation delay time, low- to high-level output
tTLH
tTHL
Transition time, low- to high-level output
tPZH
tPZL
Output enable time to high level
tPHZ
tPLZ
Output disable time from high level
See Figure 5
Propagation delay time, high- to low-level output
VIC = 0 V,
Transition time, high- to low-level output
Output enable time to low level
RL = 1 kW,
Output disable time from low level
† All typical values are at VCC = 5 V and TA = 25°C.
NOTE 8: Measured per input while the other inputs are at VCC or GND
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
See Figure 5
See Figure 6
MIN
TYP†
MAX
9
17
27
ns
9
17
27
ns
4
9
ns
4
9
ns
13
22
ns
13
22
ns
13
22
ns
13
22
ns
UNIT
SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003
PARAMETER MEASUREMENT INFORMATION
RL
2
VOD2
RL
2 VOC
Figure 1. Driver Test Circuit, VOD and VOC
3V
Input
(see Note B)
tPLH
Y
Input
VOH
R3
50%
1.3 V
Y
1.5 V
C1
S1
tsk(p)
R2
C3
0V
tPHL
R1
C2
1.3 V
1.3 V
50%
1.3 V
VOL
tsk(p)
VOH
Z
50%
1.3 V
Z
See Note A
tPHL
50%
1.3 V
VOL
tPLH
VOLTAGE WAVEFORMS
TEST CIRCUIT
NOTES: A. C1, C2, and C3 include probe and jig capacitance.
B. The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, duty cycle = 50%, tr = tf ≤ 6 ns.
Figure 2. Driver Test Circuit and Voltage Waveforms
C2
Input
C1
R1
0V
R3
VOD
1.5 V
S1
R2
C3
3V
Input
(see Note B)
Differential
Output
90%
90%
10%
10%
tr
See Note A
tf
VOLTAGE WAVEFORMS
TEST CIRCUIT
NOTES: A. C1, C2, and C3 include probe and jig capacitance.
B. The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, duty cycle = 50%, tr = tf ≤ 6 ns.
Figure 3. Driver Test Circuit and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003
PARAMETER MEASUREMENT INFORMATION
3V
Input DE
1.3 V
R1
R3
C2
0V
or
3V
Pulse
Generator
See Note B
tPLZ
C1
S1
1.5 V
1.5 V
Output
VOL + 0.3 V
0.8 V
VOL
tPHZ
DE
50 Ω
0V
tPZL
R2
C3
1.5 V
tPZH
VOH
See Note A
VOL − 0.3 V
Output
2V
1.5 V
VOLTAGE WAVEFORMS
TEST CIRCUIT
NOTES: A. C1, C2, and C3 include probe and jig capacitance.
B. The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, duty cycle = 50%, tr = tf ≤ 6 ns.
Figure 4. Driver Test Circuit and Voltage Waveforms
VCC
S1
tTLH
Output
(see Note B)
A Input
B Input
RL
Device
Under
Test
10%
tTHL
90%
50%
50%
tPLH
CL = 50 pF
(see Note A)
VOLTAGE WAVEFORMS
Figure 5. Receiver Test Circuit and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
VOL
2.5 V
0V
−2.5 V
NOTES: A. CL includes probe and jig capacitance.
B. The pulse generator has the following characteristics: PRR ≤ 1 MHz, duty cycle = 50%, tr = tf ≤ 6 ns.
8
VOH
tPHL
B Input
A Input = 0 V
TEST CIRCUIT
90%
10%
SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003
PARAMETER MEASUREMENT INFORMATION
3V
RE Input
VCC
1.3 V
1.3 V
0V
S1
0.5 V
tPLZ
VCC
Output
RE Input
VID = −2.5 V
or 2.5 V
50%
VOL
RL
Device
Under
Test
tPZL
tPHZ
tPZH
VOH
CL = 50 pF
(see Note A)
50%
Output
GND
0.5 V
tPZL, tPLZ Measurement: S1 to VCC
tPZH, tPHZ Measurement: S1 to GND
VOLTAGE WAVEFORMS
TEST CIRCUIT
NOTES: A. CL includes probe and jig capacitance.
B. The pulse generator has the following characteristics: PRR ≤ 1 MHz, duty cycle = 50%, tr = tf ≤ 6 ns.
Figure 6. Receiver Test Circuit and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
SN65C1167NSLE
OBSOLETE
SO
NS
16
SN65C1167NSR
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65C1167NSRE4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65C1167NSRG4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65C1168N
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN65C1168NE4
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN65C1168NSR
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65C1168NSRG4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65C1168PW
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65C1168PWE4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65C1168PWG4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65C1168PWR
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65C1168PWRE4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65C1168PWRG4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1167DBR
ACTIVE
SSOP
DB
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1167DBRE4
ACTIVE
SSOP
DB
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1167DBRG4
ACTIVE
SSOP
DB
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1167N
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN75C1167NE4
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN75C1167NSLE
OBSOLETE
SO
NS
16
SN75C1167NSR
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1167NSRG4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168DBR
ACTIVE
SSOP
DB
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168DBRE4
ACTIVE
SSOP
DB
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168DBRG4
ACTIVE
SSOP
DB
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168N
ACTIVE
PDIP
N
16
CU NIPDAU
N / A for Pkg Type
TBD
TBD
25
Addendum-Page 1
Pb-Free
Lead/Ball Finish
Call TI
Call TI
MSL Peak Temp (3)
Call TI
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2007
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
SN75C1168NE4
ACTIVE
PDIP
N
16
SN75C1168NSLE
OBSOLETE
SO
NS
16
SN75C1168NSR
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168NSRE4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168NSRG4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168PW
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168PWE4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168PWG4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168PWR
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168PWRE4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C1168PWRG4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(RoHS)
25
Pb-Free
(RoHS)
TBD
CU NIPDAU
Call TI
N / A for Pkg Type
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
4-Oct-2007
TAPE AND REEL BOX INFORMATION
Device
Package Pins
Site
Reel
Diameter
(mm)
Reel
Width
(mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
SN65C1167NSR
NS
16
SITE 41
330
16
8.2
10.5
2.5
12
16
Q1
SN65C1168NSR
NS
16
SITE 41
330
16
8.2
10.5
2.5
12
16
Q1
SN65C1168PWR
PW
16
SITE 41
330
12
7.0
5.6
1.6
8
12
Q1
SN75C1167DBR
DB
16
SITE 41
330
16
8.2
6.6
2.5
12
16
Q1
SN75C1167NSR
NS
16
SITE 41
330
16
8.2
10.5
2.5
12
16
Q1
SN75C1168DBR
DB
16
SITE 41
330
16
8.2
6.6
2.5
12
16
Q1
SN75C1168NSR
NS
16
SITE 41
330
16
8.2
10.5
2.5
12
16
Q1
SN75C1168PWR
PW
16
SITE 41
330
12
7.0
5.6
1.6
8
12
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
4-Oct-2007
Device
Package
Pins
Site
Length (mm)
Width (mm)
Height (mm)
SN65C1167NSR
NS
16
SITE 41
346.0
346.0
33.0
SN65C1168NSR
NS
16
SITE 41
346.0
346.0
33.0
SN65C1168PWR
PW
16
SITE 41
346.0
346.0
29.0
SN75C1167DBR
DB
16
SITE 41
346.0
346.0
33.0
SN75C1167NSR
NS
16
SITE 41
346.0
346.0
33.0
SN75C1168DBR
DB
16
SITE 41
346.0
346.0
33.0
SN75C1168NSR
NS
16
SITE 41
346.0
346.0
33.0
SN75C1168PWR
PW
16
SITE 41
346.0
346.0
29.0
Pack Materials-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
0,15 M
15
0,25
0,09
8,20
7,40
5,60
5,00
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
2,00 MAX
0,10
0,05 MIN
PINS **
14
16
20
24
28
30
38
A MAX
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30
DIM
4040065 /E 12/01
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-150
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties
may be subject to additional restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Telephony
www.ti.com/telephony
Low Power
Wireless
www.ti.com/lpw
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated