MOTOROLA SN74LS138D

SN54/74LS138
1-OF-8 DECODER/
DEMULTIPLEXER
The LSTTL / MSI SN54 / 74LS138 is a high speed 1-of-8 Decoder /
Demultiplexer. This device is ideally suited for high speed bipolar memory
chip select address decoding. The multiple input enables allow parallel expansion to a 1-of-24 decoder using just three LS138 devices or to a 1-of-32
decoder using four LS138s and one inverter. The LS138 is fabricated with the
Schottky barrier diode process for high speed and is completely compatible
with all Motorola TTL families.
•
•
•
•
•
1-OF-8 DECODER/
DEMULTIPLEXER
LOW POWER SCHOTTKY
Demultiplexing Capability
Multiple Input Enable for Easy Expansion
Typical Power Dissipation of 32 mW
Active Low Mutually Exclusive Outputs
Input Clamp Diodes Limit High Speed Termination Effects
J SUFFIX
CERAMIC
CASE 620-09
CONNECTION DIAGRAM DIP (TOP VIEW)
16
1
NOTE:
The Flatpak version
has the same pinouts
(Connection Diagram) as
the Dual In-Line Package.
N SUFFIX
PLASTIC
CASE 648-08
16
1
PIN NAMES
A0 – A2
E1, E2
E3
O0 – O7
Address Inputs
Enable (Active LOW) Inputs
Enable (Active HIGH) Input
Active LOW Outputs (Note b)
HIGH
LOW
0.5 U.L.
0.5 U.L.
0.5 U.L.
10 U.L.
0.25 U.L.
0.25 U.L.
0.25 U.L.
5 (2.5) U.L.
NOTES:
a) 1 TTL Unit Load (U.L.) = 40 µA HIGH/1.6 mA LOW.
b) The Output LOW drive factor is 2.5 U.L. for Military (54) and 5 U.L. for Commercial (74)
Temperature Ranges.
LOGIC DIAGRAM
D SUFFIX
SOIC
CASE 751B-03
LOADING (Note a)
1
ORDERING INFORMATION
SN54LSXXXJ
SN74LSXXXN
SN74LSXXXD
Ceramic
Plastic
SOIC
LOGIC SYMBOL
16
FAST AND LS TTL DATA
5-230
SN54/74LS138
FUNCTIONAL DESCRIPTION
The LS138 is a high speed 1-of-8 Decoder/Demultiplexer
fabricated with the low power Schottky barrier diode process.
The decoder accepts three binary weighted inputs (A0, A1, A2)
and when enabled provides eight mutually exclusive active
LOW Outputs (O0 – O7). The LS138 features three Enable inputs, two active LOW (E1, E2) and one active HIGH (E3). All
outputs will be HIGH unless E1 and E2 are LOW and E3 is
HIGH. This multiple enable function allows easy parallel ex-
pansion of the device to a 1-of-32 (5 lines to 32 lines) decoder
with just four LS138s and one inverter. (See Figure a.)
The LS138 can be used as an 8-output demultiplexer by
using one of the active LOW Enable inputs as the data input
and the other Enable inputs as strobes. The Enable inputs
which are not used must be permanently tied to their appropriate active HIGH or active LOW state.
TRUTH TABLE
INPUTS
OUTPUTS
E1
E2
E3
A0
A1
A2
O0
O1
O2
O3
O4
O5
O6
O7
H
X
X
L
L
L
L
L
L
L
L
X
H
X
L
L
L
L
L
L
L
L
X
X
L
H
H
H
H
H
H
H
H
X
X
X
L
H
L
H
L
H
L
H
X
X
X
L
L
H
H
L
L
H
H
X
X
X
L
L
L
L
H
H
H
H
H
H
H
L
H
H
H
H
H
H
H
H
H
H
H
L
H
H
H
H
H
H
H
H
H
H
H
L
H
H
H
H
H
H
H
H
H
H
H
L
H
H
H
H
H
H
H
H
H
H
H
L
H
H
H
H
H
H
H
H
H
H
H
L
H
H
H
H
H
H
H
H
H
H
H
L
H
H
H
H
H
H
H
H
H
H
H
L
H = HIGH Voltage Level
L = LOW Voltage Level
X = Don’t Care
A0
A1
A2
LS04
A3
A4
H
123
A0 A1 A2
E
123
A0 A1 A2
123
E
A0 A1 A2
E
123
A0 A1 A2
E
LS138
LS138
LS138
LS138
O0 O1 O2 O3 O4 O5 O6 O7
O0 O1 O2 O3 O4 O5 O6 O7
O0 O1 O2 O3 O4 O5 O6 O7
O0 O1 O2 O3 O4 O5 O6 O7
O0
O31
Figure a
FAST AND LS TTL DATA
5-231
SN54/74LS138
GUARANTEED OPERATING RANGES
Symbol
Parameter
Min
Typ
Max
Unit
VCC
Supply Voltage
54
74
4.5
4.75
5.0
5.0
5.5
5.25
V
TA
Operating Ambient Temperature Range
54
74
– 55
0
25
25
125
70
°C
IOH
Output Current — High
54, 74
– 0.4
mA
IOL
Output Current — Low
54
74
4.0
8.0
mA
DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified)
Limits
Symbol
Parameter
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
VIK
Input Clamp Diode Voltage
VOH
Output HIGH Voltage
VOL
Output LOW Voltage
IIH
Input HIGH Current
IIL
Input LOW Current
IOS
Short Circuit Current (Note 1)
ICC
Power Supply Current
Min
Typ
Unit
Max
2.0
54
0.7
74
0.8
– 0.65
– 1.5
Test Conditions
V
Guaranteed Input HIGH Voltage for
All Inputs
V
Guaranteed Input LOW Voltage for
All Inputs
V
VCC = MIN, IIN = – 18 mA
54
2.5
3.5
V
74
2.7
3.5
V
VCC = MIN, IOH = MAX, VIN = VIH
or VIL per Truth Table
VCC = VCC MIN,
VIN = VIL or VIH
per Truth Table
54, 74
0.25
0.4
V
IOL = 4.0 mA
74
0.35
0.5
V
IOL = 8.0 mA
20
µA
VCC = MAX, VIN = 2.7 V
0.1
mA
VCC = MAX, VIN = 7.0 V
– 20
– 0.4
mA
VCC = MAX, VIN = 0.4 V
–100
mA
VCC = MAX
10
mA
VCC = MAX
Note 1: Not more than one output should be shorted at a time, nor for more than 1 second.
AC CHARACTERISTICS (TA = 25°C)
Symbol
Levels of
Delay
Parameter
Limits
Min
Typ
Max
Unit
tPLH
tPHL
Propagation Delay
Address to Output
2
2
13
27
20
41
ns
tPLH
tPHL
Propagation Delay
Address to Output
3
3
18
26
27
39
ns
tPLH
tPHL
Propagation Delay E1 or E2
Enable to Output
2
2
12
21
18
32
ns
tPLH
tPHL
Propagation Delay E3
Enable to Output
3
3
17
25
26
38
ns
Test Conditions
VCC = 5.0 V
CL = 15 pF
AC WAVEFORMS
Figure 1
Figure 2
FAST AND LS TTL DATA
5-232
Case 751B-03 D Suffix
16-Pin Plastic
SO-16
-A-
"!
! "
"
! " # 1
%# ) ! !" $ !"
8
C
-T-
D M
K
"
!
#! J
F
!
Case 648-08 N Suffix
16-Pin Plastic
R X 45°
G
"
!
)
#!
P
! "
"
9
-B-
!
16
& !
!
°
°
°
°
(
(
(
(
"!
! "
"
!
! ' " "
! ' ! " # & -A-
16
9
1
8
! ! $
!
B
# ) "
! "
# ) !" $ !"
)
F
L
C
S
-T-
K
H
G
M
J
D "
Case 620-09 J Suffix
16-Pin Ceramic Dual In-Line
-A-
!
!
!
!
°
°
°
°
"!
! "
16
"
) "
L
K
M
N
J G
D "
$ " $
! " "
!
!
FAST AND LS TTL DATA
5-233
&
# ) !" $ !"
)
-T
$
" "
C
F
& 8
E
!
! ! " "
-B1
& 9
*
*
!
!
!
!
*
*
!
°
°
!
°
°
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
Literature Distribution Centers:
USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036.
EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England.
JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan.
ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
◊
FAST AND LS TTL DATA
5-234