SP-240 240W Single Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC Fan Built-in fan ON / OFF control LED indicator for power on Fixed switching frequency at 90KHz 3 years warranty SPECIFICATION MODEL OUTPUT SP-240-5 SP-240-7.5 SP-240-12 SP-240-15 SP-240-24 SP-240-30 SP-240-48 DC VOLTAGE 5V 7.5V 12V 15V 24V 30V 48V RATED CURRENT 45A 32A 20A 16A 10A 8A 5A CURRENT RANGE 0 ~ 45A 0 ~ 32A 0 ~ 20A 0 ~ 16A 0 ~ 10A 0 ~ 8A 0 ~ 5A RATED POWER 225W 240W 240W 240W 240W 240W 240W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE 4 ~ 6V 2.0% 6 ~ 9V 2.0% 10 ~ 14V 1.0% 12 ~ 18V 1.0% 20 ~ 28V 1.0% 27 ~ 33V 1.0% 41 ~ 56V 1.0% LINE REGULATION 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% LOAD REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% VOLTAGE TOLERANCE Note.3 SETUP, RISE TIME 800ms, 50ms/230VAC HOLD UP TIME (Typ.) 20ms/230VAC 20ms/115VAC at full load VOLTAGE RANGE Note.5 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT 1500ms, 50ms/115VAC at full load 124 ~ 370VDC POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) AC CURRENT (Typ.) 79% 83% INRUSH CURRENT (Typ.) 3.6A/115VAC 25A/115VAC 1.8A/230VAC 40A/230VAC LEAKAGE CURRENT <2mA / 240VAC OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION FAN CONTROL WORKING TEMP. PF>0.98/115VAC at full load 86% 86% 87% 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 9.4 ~ 10.9V 14.7 ~ 17.5V 19 ~ 22.5V 29.5 ~ 35V 6.3 ~ 7.5V 88% 89% 34.7 ~ 41V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover 90 5 (5V,7.5V), 85 5 (12V,15V,24V,30V,48V) (TSW1 : detect on heatsink of power transistor) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RTH2 40 FAN ON, 35 FAN OFF(Typ.) -20 ~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 284K hrs min. DIMENSION 190*93*50mm (L*W*H) 0.8Kg; 18pcs/15.4Kg/1.04CUFT PACKING NOTE UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC MIL-HDBK-217F (25 ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:SP-240-SPEC 2011-08-23 USSPP--23242005 240W Single Output with PFC Function Mechanical Specification Unit:mm 12.5 25 Case No.987A ssee rr ii eess 4-M4 L=6 20.25 150 159.5 139.5 133 49.5 20 7 6 60.5 41.5 43.5 8 2 44 84.5 9.5 4 3 93 4-SO M3 L=4 5 1 190 Air flow direction 150 12.5 20.25 25 4-M4 L=6 Terminal Pin No. Assignment Pin No. 1 2 3 50 14max. Assignment AC/L AC/N FG Pin No. 4,5 6,7 Block Diagram fosc : 90KHz FAN ON/OFF CONTROL EMI FILTER & RECTIFIERS I/P PFC CIRCUIT FG O.L.P. O.V.P. Static Characteristics 100 80 50 LOAD (%) LOAD (%) 60 40 20 0 +V -V DETECTION CIRCUIT PWM & PFC CONTROL Derating Curve FAN RECTIFIERS & FILTER POWER SWITCHING O.T.P. -20 Assignment DC OUTPUT -V DC OUTPUT +V 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 100 300 90 250 80 200 70 150 60 100 50 50 40 25 88 90 95 100 115 135 155 175 195 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:SP-240-SPEC 2011-08-23