SPA555 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 20A / 1000 - 1200V SiC SCHOTTKY SINGLE PHASE BRIDGE Part Number / Ordering Information 1/ SPA555 __ __ __ │ │ └ Screening2/ __ = Not screened │ │ TX = TX Level │ │ TXV = TXV Level │ │ S = S Level │ └ Terminals3/ = Turret Terminals │ L = Copper Leads │ SM = Surface Mount │ └ Voltage M = 1000 V N = 1200 V Features: • • • • • • • 1200V Silicon Carbide Schottky Rectifier Average Output Current 20 Amps No Reverse Recovery No Forward Recovery No Switching Time Change over Temperature Small Package Size (1.25 x 1.25 x 0.350”) Cases with Aluminum Heatsink are Available. Consult Factory • TX and TXV & S Level Screening Available2/ Maximum Ratings Peak Repetitive and Peak Surge Reverse Voltage Average Rectified Forward Current 4/ (Resistive Load, 60 Hz Sine Wave, TC = 55°C) Peak Surge Current 5/ (8.3 ms Pulse, Half Sine Wave, TA = 25°C) Operating & Storage Temperature Junction Temperature Maximum Thermal Resistance Junction to Case SPA555M SPA555N Symbol Value Units VRRM VRSM VR 1000 1200 Volts IO 20 Amps IFSM 26 Amps Top & Tstg -55 to +150 ºC TJ -55 to +200 ºC RθJC 1.5 ºC/W 1 SPA555 ( ) SPA555 (L) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. SPA555 (SM) DATA SHEET #: RA0038D DOC SPA555 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristic 6/ Symbol Min Typ Max Units IF = 2.0 A IF = 5.0 A IF = 10 A VF1 VF2 VF3 –– –– 1.20 1.50 2.10 1.30 1.75 2.50 VDC TA= -55ºC, IF = 5 A TA= 150 ºC, IF = 5 A VF4 VF5 –– –– 1.35 2.30 1.50 2.80 VDC IR1 –– 20 250 μA IR2 –– 100 1000 μA CJ –– 280 320 pF Instantaneous Forward Voltage Drop (TA=25ºC, 300 - 500 μsec pulse) Instantaneous Forward Voltage Drop (300 - 500 μsec pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300 μsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 150ºC, 300 μsec pulse minimum) Junction Capacitance (VR = 10V, f = 1MHz, TA = 25°C) NOTES: Available Part Numbers: * Pulse Test: Pulse Width = 300 μsec, Duty Cycle = 2% 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ For Package Outlines Contact Factory. 4/ Derate Linearly at 0.28A/ºC for TC > 55ºC. 5/ Electrical Characteristic per Leg 6/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. SPA555M; SPA555ML; SPA555MSM SPA555N; SPA555NL; SPA555NSM Mounting Diagram: 2/ Terminal Details SPA555 (SM) Terminals are spaced at .650” square SPA555 ( ) SPA555 (L) Leads are spaced at .250” NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Terminals are spaced at .650” square DATA SHEET #: RA0038D DOC