SPD3595 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 150 mA 125 VOLT Designer’s Data Sheet 3 μsec STANDARD RECOVERY Part Number/Ordering Information 1/ RECTIFIER SPD____ __ __ │ │ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level (for SM, use –S) │ └ Package Type __ = Axial Leaded SM = Surface Mount Round Tab (MELF) SMS = Surface Mount Square Tab FEATURES: • • • • • • • Device Type ( VRWM ) 3595 = 125 V • Standard Reverse Recovery Time: 3 μsec Max Hermetically Sealed Planar Passivated Chip For High Efficiency Applications Available in Axial, Subminiature Round Tab & Subminiature Square Tab Versions Faster Devices Available – Contact Factory 2/ TX, TXV, and S-Level Screening Available Replacement for 1N3595 MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TC = 25°C) Peak Surge Current (t = 1sec, Ta = 25°C) Operating & Storage Temperature Thermal Resistance Junction to End Tab (SM & SMS) Axial- Junction to Lead @ .375” SYMBOL VALUE UNIT VRWM VR 125 Volts IO 150 mAmps IFSM 500 mAmps TOP and TSTG RθJE RθJL -65 to +175 °C 100 250 °C/W NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. Axial Leaded NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. SM DATA SHEET #: RC0127C SMS DOC SPD3595 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS Maximum Instantaneous Forward Voltage Drop (Pulsed, TA = 25°C) IF = 200mA IF = 100mA IF = 50mA IF = 10mA IF = 5mA IF = 1mA Minimum Breakdown Voltage Ir = 50 μA Maximum Reverse Leakage Current (300 μs Pulse Minimum , TA = 25°C) VR = 125V Maximum Reverse Leakage Current (300 μs Pulse Minimum , TA = 150°C) VR = 125V SYMBOL MIN MAX UNIT VF1 VF2 VF3 VF4 VF5 VF6 .83 .79 .74 .65 .60 .52 1.00 .92 .88 .80 .765 .70 Vdc BVR 125 --- Vdc IR1 -- 1.0 nA -- 3 μA IR2 Maximum Junction Capacitance (TA = 25°C , f = 1MHz, VR = 0V) CJ -- 8.0 pf Maximum Reverse Recovery Time (IF = 10 mA, VR = 35V, R = 1,000 Ω) trr -- 3 μsec SM AXIAL SMS DIM MIN MAX MIN MAX MIN MAX A .056” .075” .063” .067” .070” .085” B .140” .180” .130” .146” .165” .195” C 1.00” 1.50” .016” .022” .019” .028” D .018” .022” .001” --- .003” --- Dimensions prior to soldering NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0127C DOC