SSDI SPD3912RTXV

SPD3909
Thru
SPD3913
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information 1/
SPD39 __ __ __
│ │ └
Screening 2/ __ = Not Screened
│ │
TX = TX Level
│ │
TXV
= TXV Level
│ │
S
= S Level
│ │
│ └ Pin Configuration __ = Normal (Cathode
│
to Stud)
(See Table 1)
│
R = Reverse (Anode to
│
Stud)
└ Family/Voltage 09 = 50V
10 = 100V
11 = 200V
12 = 300V
13 = 400V
30A, 200nsec, 50-400 V
Fast Recovery Rectifier
Features:
•
•
•
•
•
•
•
•
Maximum Ratings 4/
Peak Repetitive Reverse Voltage
Average Rectified Forward Current
(Resistive Load, 60 Hz Sine Wave, TA = 25 °C)
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave, TA = 25 °C, per leg)
Operating & Storage Temperature
Maximum Total Thermal Resistance
Junction to Case
SPD3909
SPD3910
SPD3911
SPD3912
SPD3913
Fast Recovery: 200nsec Maximum (100nsec
typ.) 3/
Low Reverse Leakage Current
Single Chip Construction
PIV to 400V, Higher Voltages Available
Hermetically Sealed Isolated Package
High Surge Rating
Replacement for 1N3909, 1N3910, 1N3911,
1N3912, and 1N3913
TX, TXV, and S-Level Screening Available 2/
Symbol
Value
Units
VRRM
VRWM
VR
50
100
200
300
400
Volts
Io
30
Amps
IFSM
300
Amps
TOP
T STG
-55 to +150
-65 to +175
ºC
RθJC
1.2
ºC/W
DO-5:
Notes:
1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory.
2/ Screened to MIL-PRF-19500.
3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA.
4/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25°C.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0114B
DOC
SPD3909
Thru
SPD3913
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Electrical Characteristics (per leg) 4/
Symbol
Max
Units
IF = 30A, TA = 25 ºC
IF = 30A, TA = -55 ºC
VF1
VF2
1.40
1.50
VDC
TA = 25 ºC
TA = 100 ºC
IR1
IR2
80
10
μA
mA
Maximum Reverse Recovery Time
(IF = 500 mA, IR = 1 Amp, IRR = 250 mA)
tRR
200
nsec
Typical Junction Capacitance
(VR = 10VDC, TA = 25ºC, f = 1MHz)
CJ
200
pF
Maximum Instantaneous Forward Voltage Drop
(Pulsed)
Maximum Reverse Leakage Current
(Rated VR Minimum)
Notes:
1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory.
2/ Screened to MIL-PRF-19500.
3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA.
4/ Unless Specified Otherwise, All Maximum Ratings/Electrical Characteristics are @25°C.
Table 1- PIN ASSIGNMENT
Code
Configuration
Terminal
Stud
__
Normal
Anode
Cathode
R
Reverse
Cathode
Anode
DO-5 Outline (Normal Pin Configuration Shown):
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0114B
DOC