SPU12B SERIES 15W Wall Mount Switching Power Supplies For I.T.E. Description: The SPU12B series of AC/DC switching mode power supplies provide 15 Watts of continuous output power. All supplies are UL 94V-1 min compliant, include a 3 prong plug-in mains connector for certain applications. All models meet CISPR-22 class B emission Limits and are designed to comply with new CE requirements. All units are 100% burned in and tested. Features: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz 3 Prong Plug-In Mains Connector Output Voltage Available From 3VDC Thru 50VDC Optional Output Connector (See appendix) Single Output Class II Insulation (Double Insulation) Two years warranty Safety Approvals: CB Electrical Characteristics: Sym. Parameter Test Conditions Vin Fin Input Voltage Input Frequency Operating Voltage Wo Vo Output Power Range Output Voltage Range Vin=90 to 264VAC Io Iil Output Current Range Input Current (Low Line) Iih Input Current (High Line) Irl Low Line Inrush Current Irh High Line Inrush Current Eff Efficiency Io=Full load, Vin=115VAC Io=Full load, Io=Full load, Vin=115VAC Io=Full load, Vin=230VAC Io=Full Load, REG-i Line Regulation Io=Full Load REG-o Load Regulation Vin=230VAC Vin=230VAC 25°c, Cool start, 25°c, Cool start, Vin=230VAC Min. Typ. 90 47 Max. Unit 264 63 VAC Hz 0 15 See rating chart W V See rating chart 0.4 A A 60 0.3 A 12 15 A 26 30 A 70 78 % 0.5 1 % 3 7 % OVP Over Voltage Protection OCP Over Current Protection Nil But,Output protected to short circuit conditions % Ttr Transient Response Io=Full Load to Half Load, Vin=100VAC mS Thold Hold-Up Time Nil 5 0.3 Start Up Time Io=Full Load, Vin=100VAC Vrn Ripple & Noise(Peak to Peak) Full Load, Vin=90VAC Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC Tc All output Temperature Coefficient 4 Io=Full Load, Vin=110VAC Ts % mS 1 2 1 2 0.5 0.75 -0.04 0.04 S % mA %/°c Environmental : Sym. Toper Tstg Parameter Te s t Conditions Operating Temperature Storage Temperature Hr Relative Humidity No-Condensing Pd Derate linearly from 100% load at 40 C to 50% load at 70 C Min. Typ. Max. Unit 0 70 C -40 85 C 5 95 % SPU12B SERIES 15W Wall Mount Switching Power Supplies For I.T.E. Safety Specifications: Sym. Vps Ri Parameter Dielectric Withstanding Voltage for Primary to secondary Isolation Resistance CISPR EMI requirements for CISPR-22 FCC EMI requirements for FCC PART-15 Te s t Conditions Primary to secondary Min. Typ . Max. Unit 4242 VDC M Test Voltage=500VDC 50 Vin=220VAC B CLASS Vin=110VAC B CLASS Output Voltage And Current Rating Chart ( Single Output ) : Total Regulation Maximum Output Power 3.30 ~ 2.00 A 7% 10W 2.00 ~ 1.66 A 5% 10W 6 ~ 18 VDC 1.66 ~ 1.25 A 5% 10W SPU12B-104 8 ~ 11 VDC 1.50 ~ 1.09 A 5% 12W SPU12B-105 11 ~ 13 VDC 1.36 ~ 1.15 A 5% 15W SPU12B-106 13 ~ 16 VDC 1.15 ~ 0.93 A 5% 15W SPU12B-107 16 ~ 21 VDC 0.93 ~ 0.71 A 3% 15W SPU12B-108 21 ~ 27 VDC 0.71 ~ 0.55 A 3% 15W SPU12B-109 27 ~ 33 VDC 0.59 ~ 0.48 A 3% 16W SPU12B-110 33 ~ 40 VDC 0.45 ~ 0.37 A 3% 15W SPU12B-111 40 ~ 50 VDC 0.37 ~ 0.30 A 3% 15W Model Number Output Voltage Output Current SPU12B-101 3 ~ 15 VDC SPU12B-102 5 ~ 16 VDC SPU12B-103 Mechanical Specifications: ( UK Type ) (OPTIONAL) Note: 1. Dimensions are shown in mm. 2. Weight: 115gs approx. 3. Optional output connector: See page Appendix.