TPSPU80 SERIES 80W Desk Top Switching Power Supplies For I.T.E. Description: The 80 series of AC/DC switching mode power supplies provide 80 Watts of continuous output power. All supplies are UL 94V-1 min compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c-UL(UL 60950-1), TUV/GS(EN 60950-1) and new CE requirements. All units are 100% burned in and tested. Features: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single Output Output Voltage Available From 11VDC Thru 48VDC Optional Output Connector (See appendix) Input Surge Current, Over Voltage And Over Load protection Power Factor Correction Output Voltage Protection(Crowbar Design) Splash proof Class I 2 year warranty Safety Approvals : CB Electrical Characteristics: Sym. Vin fin Parameter Test Conditions Operating Voltage Input Voltage Input Frequency Min. Typ. Max. Unit 90 264 VAC 47 63 Hz PF Power Factor Correction Io=Full load, Vin=90~260VAC Po Output Power Range Vin=90 to 264 VAC Vo Output Voltage Range See rating Chart V Io Output Current Range See rating Chart A 0.95 0.97 1.0 80 0 W Iil Input Current (Low Line) Io=Full load, Vin=115VAC 1.07 Iih Input Current (High Line) 0.5 A A I rl Low Line Inrush Current I rh High Line Inrush Current Eff Efficiency Io=Full load, Io=Full load, Vin=115VAC Io=Full load, Vin=230VAC Io=Full load, Vin=230VAC 25 C,Cool start, 12 15 A 25 C,Cool start, 26 30 A 83 88 % REG-i Line Regulation Io=Full load REG -o Load Regulation 0.5 1 % 3 7 % OVP Over Voltage Protection 112 132 % OCP Over Current Protection 110 150 % Ttr Time of Transient Response Io=Full load to Half Load, Vin=100VAC 4 mS Vin=230VAC 80 Vin=230VAC Thold Hold-Up Time Io=Full load, Vin=110VAC 16 Ts Start Up Time Io=Full load, Vin=100VAC 0.3 Vp-p Ilk TC mS 1 2 Ripple & Noise (Peak to Peak) Full load, Vin=90VAC 0.5 1 Safety Ground Leakage Current Io=Full load, Vin=240VAC 0.5 0.75 Temperature All output Coefficient -0.04 0.04 S % mA %/ C Environmental : Sym. Toper Tstg Hr Parameter T e s t Conditions Operating Temperature Storage Temperature Relative Humidity MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F Pd Derate linearly from 100% load at 40 C to 50% load at 70 C Total Power International, Inc. Toll Free: 877-646-0900(US) Min. Typ. Max. Unit 0 70 -40 85 C 5 95 % 0.1 C M Hrs www.total-power.com TPSPU80 SERIES 80W Desk Top Switching Power Supplies For I.T.E. Safety Specifications: Sym. Vps Vpg Ris Parameter CISPR EMI requirements for CISPR-22 FCC Min. Typ. Max. Unit Primary to secondary 4242 VDC Primary to ground 2121 VDC T e s t Conditions Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to Ground Isolation Resistance EMI requirements for FCC PART-15 M Test Voltage=500VDC 50 Vin=220VAC B CLASS Vin=110VAC B CLASS Output Voltage And Current Rating Chart (Single Output) : Model Number Out Voltage Total Regulation Out Current Maximum Out Power * TPSPU80-105 11 ~ 13 VDC 7.27 ~ 6.15 A 5% 80W * TPSPU80-106 13 ~ 16 VDC 6.15 ~ 5.00 A 5% 80W * * * TPSPU80-107 16 ~ 21 VDC 5.00 ~ 3.80 A 5% 80W TPSPU80-108 21 ~ 27 VDC 3.80 ~ 2.96 A 5% 80W TPSPU80-109 27 ~ 33 VDC 2.96 ~ 2.42 A 5% 80W TPSPU80-110 33 ~ 40 VDC 2.42 ~ 2.00 A 5% 80W TPSPU80-111 40 ~ 48 VDC 2.00 ~ 1.66 A 5% 80W Mark " * " means " PSE approval " The output voltage under 30V had been approved by TUV/PSE Mechanical Specifications: Total Power International, Inc. Note: 1. Dimensions are shown in inches or mm. 2. Weight: 600-700gs approx. 3. Optional output connector: See page Appendix. Toll Free: 877-646-0900(US) www.total-power.com