TPSPU25A SERIES 25W Desk Top Switching Power Supplies For I.T.E. Description: The 25A series of AC/DC switching mode power supplies provide 25 Watts of continuous output power and is well-suited for a variety of applications. All supplies are UL 94V-1 min compliant. All model meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c-UL(UL 60950-1), TUV/GS(EN 60950-1) and new CE requirements. All units are 100% burned-in and tested. Features: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Output Voltage Available From 5VDC Thru 48VDC Optional Output Connector (See appendix) Single Output Splash proof Class I CEC and Energy Star compliance Approved as Limited Power Source (LPS). 2 year warranty Safety Approvals: CB PS E Electrical Characteristics: Sym. Vin Parameter Input Voltage Test Conditions Operating Voltage Min. Typ. Max. Unit 264 VAC 47 63 Hz 0 25 W 90 fin Input Frequency Po Output Power Range Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 0.4 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.25 A Irl Low Line Inrush Current Io=Full load, 25c, Cool start, Vin=115VAC 12 15 A Irh High Line Inrush Current Io=Full load, 25c, Cool start, Vin=230VAC 26 30 A Eff Efficiency Io=Full Load, Vin=230VAC Vin=90 to 264VAC REG-i Line Regulation Io=Full Load REG-o Load Regulation Vin=230VAC OVP Over Voltage Protection OCP Over Current Protection Ttr Time of Transient Response Thold Hold-Up Time 75 1 85 95 % 0.5 1 % 3 5 % Nil 110 150 % 4 mS 14 16 mS Io=Full Load to Half Load, Vin=100VAC Io=Full Load, Vin=110VAC 12 % Ts Start Up Time Io=Full Load, Vin=100VAC 0.25 0.5 S Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 0.5 1 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.5 0.75 mA TC Temperature Coefficient All output 0.04 %/c Pno No-Load Power Consumption No load, Vin=240VAC 0.5 W -0.04 0 0.4 Environmental : Sym. Parameter Toper Operating Temperature Tstg Storage Temperature Hr T e s t Conditions Relative Humidity MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F Pd Derate linearly from 100% load at 40 C to 50% load at 70 C Total Power International, Inc. Toll Free: 877-646-0900(US) Min. Typ. Max. Unit 0 70 -40 85 C 5 95 % 0.3 C M Hrs www.total-power.com TPSPU25A SERIES 25W Desk Top Switching Power Supplies For I.T.E. Safety Specifications: Sym. Vps Vpg Ris Parameter Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to Ground Isolation Resistance CISPR EMI requirements for CISPR-22 FCC EMI requirements for FCC PART-15 Min. Typ. Max. Unit Primary to secondary 4242 VDC Primary to ground 2121 VDC T e s t Conditions M Test Voltage=500VDC 50 Vin=220VAC B CLASS Vin=110VAC B CLASS Output Voltage And Current Rating Chart ( Single Output ) : Model Number Output Voltage Output Current Total Regulation Maximum Output Power TPSPU25A-102 5 ~ 6 VDC TPSPU25A-103 6 ~ 8 VDC 3.30 ~ 2.50 A 5% 20W TPSPU25A-104 8 ~ 11 VDC 2.75 ~ 2.00 A 5% 22W TPSPU25A-105 11 ~ 13 VDC 2.27 ~ 1.92 A 5% 25W TPSPU25A-106 13 ~ 16 VDC 1.92 ~ 1.56 A 5% 25W TPSPU25A-107 16 ~ 21 VDC 1.56 ~ 1.19 A 5% 25W TPSPU25A-108 21 ~ 27 VDC 1.19 ~ 0.92 A 3% 25W TPSPU25A-109 27 ~ 33 VDC 0.92 ~ 0.75 A 3% 25W TPSPU25A-110 33 ~ 40 VDC 0.75 ~ 0.62 A 3% 25W TPSPU25A-111 40 ~ 48 VDC 0.62 ~ 0.52 A 3% 25W 3.00 ~ 2.75 A 5% 16.5W The output voltage under 30V had been approved by TUV/PSE. Mechanical Specifications : Total Power International, Inc. Note: 1. Dimensions are shown in mm. 2. Weight: 170gs approx. 3. Optional output connector: See page Appendix. Toll Free: 877-646-0900(US) www.total-power.com