SPU65 SERIES 80W Desk Top Switching Power Supplies For I.T.E. Description: The SPU65 series of AC/DC switching mode power supplies provide 80 Watts of continuous output power. All supplies are UL 94V-0 compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part15 class B and CISPR-22 class B emission Limits and are designed to comply with UL, C-UL, TUV and CE requirements. All units are 100% burned in and tested. Features: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single to Quad Output Output Voltage Available From 3 VDC Thru 48 VDC Optional Output Connector (See appendix) Input Surge Current, Over Voltage and Over Load protection Splash proof Class I Insulation Two Years Warranty Safety Approvals : CB Product Safety PS E Electrical Characteristics: Sym. Parameter Vin Fin Wo Vo Io Iil Iih Input Voltage Input Frequency Output Power Range Output Voltage Range Output Current Range Input Current (Low Line) Input Current (High Line) Irl Low Line Inrush Current Irh High Line Inrush Current Eff REG-i REG-o OVP OCP Ttr Thold Ts Vrn Ilk Tc Efficiency Line Regulation Load Regulation Over Voltage Protection Over Current Protection Transient Response Hold-Up Time Start Up Time Ripple & Noise (Pe ak to Peak) Safety Ground Leakage Current Temperature Coefficient Test Conditions Vin=90 to 264VAC Io=Full load, Io=Full load, Io=Full load, Vin=115VAC Io=Full load, Vin=230VAC Io=Full Load, Io=Full Load Vin=230VAC Vin=115VAC Vin=230 VAC 25°c, Cool start, Min. Max. Unit 90 264 47 63 0 80 See rating chart See rating chart 1.9 1.5 VAC Hz W V A A A 12 15 A 26 30 A 83 0.5 3 88 1 7 132 150 4 2 2 0.75 0.04 % % % % % mS mS S % mA %/°c Max. Unit 70 85 95 °c °c % 25°c, Cool start, Vin=230VAC Typ. 75 112 110 Io=Full Load to Half Load, Vin=100VAC Io=Full Load, Vin=100VAC 16 Io=Full Load, Vin=100VAC 0.3 1 Full Load, Vin=90VAC 1 Io=Full Load, Vin=240VAC 0.5 All output -0.04 Environmental : Sym. Toper Tstg Hr Pd Parameter Test Conditions Operating Temperature Storage Temperature Relative Humidity Derate linearly from 100% load at 40°c to 50% load at 70°c Min. 0 -40 5 Typ. Safety Specifications: Sym. Vps Vpg Ri Parameter Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to ground Isolation Resistance CISPR EMI requirements for CISPR-22 FCC EMI requirements for FCC PART-15 Test Conditions Min. Typ. Max. Unit Primary to secondary 4242 VDC Primary to ground 2121 VDC Test Voltage = 500VDC Vin=220VAC Vin=110VAC 50 MW B CLASS B CLASS SPU65 SERIES 80W Desk Top Switching Power Supplies For I.T.E. Output Voltage And Current Rating Chart (Single Output) : Model Number Output Voltage SPU65-101 SPU65-102 SPU65-103 SPU65-104 SPU65-105 SPU65-106 SPU65-107 SPU65-108 SPU65-109 SPU65-110 SPU65-111 03 05 06 08 11 13 16 21 27 33 40 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 05 06 08 11 13 16 21 27 33 40 48 Output Current VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC 16.6 13.0 11.6 9.37 7.27 6.15 5.00 3.80 2.96 2.42 2.00 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 10.0 10.8 8.70 6.81 6.15 5.00 3.80 2.96 2.42 2.00 1.66 Total Regulation Maximum Output Power 7% 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 50W 65W 69.6W 75W 80W 80W 80W 80W 80W 80W 80W A A A A A A A A A A A Output Voltage And Current Rating Chart ( Multi Output ) : Model Number Output #1 Output #2 Vonom Iomin Iomax Regmax Vonom Iomin Iomax Output #3 Regmax Vonom Iomin Iomax Maximum Output Power Regmax Vonom Iomin Iomax Regmax 56.1W Output #4 SPU65-200 +3.3V 0.5A 7A 7% +12V 0.1A 2.75A 5% SPU65-201 +5V 0.5A 7A 5% +12V 0.3A 3A 5% 60W SPU65-202 +5V 0.5A 7A 5% +15V 0.1A 3A 5% 60W SPU65-203 +5V +24V 0.2A 0.5A 7A 5% SPU65-204 +3.3V 0.5A 7A 7% SPU65-215 +5V +5V 2A 5% 60W 0.1A 3A 5% 38.1W 0.5A 7A 5% -24V 0.2A 2A 5% SPU65-300 +3.3V 0.3A 7A 7% +12V 0.1A 3A 5% SPU65-301 +5V 0.5A 6A 5% +12V 0.1A 2.75A SPU65-302 +5V 0.5A 6A 5% +12V 0.1A 2.125A SPU65-303 +5V 0.5A 6A 5% SPU65-304 +5V 0.5A 7A 5% SPU65-305 +5V 0.5A 6A 5% 7A 3.5A SPU65-306 +3.3V 0.5A SPU65-403 +5V 0A 0A 0.8A 5% 5% -5V 0A 0.325A 5% 65W 5% -12V 0A 0.325A 5% 59.4W +15V 0.1A 2.125A 5% -15V 0A 0.208A 5% 65W +24V 0.1A 5% -24V 0A 0.5A 5% 65W +24V 0.1A 1.25A 5% -12V 0A 0.416A 5% 65W 7% +12V 0.1A 3A 5% -5V 0A 0.8A 5% 5% +24V 0.1A 1.5A 5% +12V 0A 0.25A 5% Mechanical Specifications : ON/OFF SWITCH (OPTIONAL) 60W -12V 2A 65W 63.1W -12V 0A 0.15A 5% 65W Note: 1. Dimensions are shown in mm. 2. Weight: 570-750gs approx. 3. Optional output connector: See page Appendix.