SSR10C60CT Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 10 A / 600 V Schottky Silicon Carbide Centertap Rectifier Designer’s Data Sheet Part Number / Ordering Information 1/ SSR10C __ __ __ __ │ │ │ └ Screening __ = Not Screened │ │ │ TX = TX Level TXV = TXV │ │ │ S = S Level │ │ │ 2/ │ │ └ Package G = Cerpack │ │ │ └ Configuration CT = Centertap │ └ Voltage 40 = 400 V 50 = 500 V 60 = 600 V FEATURES: • • • • • • • 600 Volt Silicon Carbide Schottky Rectifier Average Output Current 10 Amps No Reverse Recovery No Forward Recovery No Switching Time Change Over Temperature Small Package Size TX, TXV, and Space Level Screening Available. Consult Factory. MAXIMUM RATINGS Peak Repetitive and Peak Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave) Peak Surge Current o (8.3 ms Pulse, Half Sine Wave, TA = 25 C) Operating & Storage Temperature Junction Temperature Maximum Thermal Resistance (Junction to Case) SSR10C40CT SSR10C50CT SSR10C60CT Per Leg Total Symbol Value VRRM VR 400 500 600 5 10 IO IFSM 60 T OP & Tstg -55 to +250 TJ -55 to +250 RθJC 1.5 Units Volts Amps Amps o o C o C C/W CERPACK (G) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0036A DOC SSR10C60CT Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ Symbol Condition Temperature (TA) -55°C Instantaneous Forward Voltage Drop (300 - 500 μsec pulse) VF1 VF2 VF3 VF4 VF5 IF = 2.0 A IF = 5.0 A IF = 10.0A IF = 5.0 A IF = 5.0 A Reverse Leakage Current (300 μsec pulse min) IR1 IR2 At rated VR Junction Capacitance CJ VR = 10V f = 1MHz 25°C Units 150°C typ. max typ. max typ. max ------1.3 --- ------1.8 --- 1.15 1.25 1.5 ----- 1.25 1.55 1.9 ----- --------1.25 --------1.8 VDC ----- 25 --- 250 --- --50 --1000 μA --- 200 350 --- pF NOTES: * 1/ 2/ 3/ Pulse Test: Pulse Width = 300 μsec, Duty Cycle = 2% For Ordering Information, Price, and Availability Contact Factory. For Package Outlines Contact Factory. Unless Otherwise Specified, All Electrical Characteristics @25ºC Available Part Numbers: SSR10C40CTG SSR10C50CTG SSR10C60CTG NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Package Cerpack (G) PIN ASSIGNMENT Pin 1 Pin 2 Anode DATA SHEET #: SH0036A Anode Pin 3 (Tab) Cathode DOC