STTH10LCD06 Turbo2 ultrafast - high voltage rectifier for flat panel displays Features A ■ ultrafast switching ■ low reverse current ■ low thermal resistance ■ reduces conduction and switching losses ■ insulated package TO-220FPAC: – insulated voltage: 2500 V rms – typical package capacitance: 12 pF A K K TO-220AC STTH10LCD06D Description TO-220FPAC STTH10LCD06FP A K The STTH10LCD06 uses ST Turbo2 technology. This device is suited for power applications in flat panel displays and especially applicable to switching power supplies in LCDs. A K K A A A A DPAK STTH10LCD06SB-TR Table 1. Doc ID 15858 Rev 2 D2PAK STTH10LCD06SG-TR Device summary IF(AV) September 2010 K 10 A VRRM 600 V Tj 175 °C VF (typ) 1.3 V trr (max) 50 ns 1/10 www.st.com 10 Characteristics STTH10LCD06 1 Characteristics Table 2. Absolute ratings (limiting values per diode at 25 °C, unless otherwise specified) Symbol Parameter VRRM Repetitive peak reverse voltage IF(RMS) Forward current rms DPAK 10 A Tc = 55 °C TO-220FPAC, 10 A 100 A -65 to + 175 °C 175 °C Value Unit Surge non repetitive forward current tp = 10 ms sinusoidal Tstg Storage temperature range Maximum operating junction temperature(1) condition to avoid thermal runaway for a diode on its own heatsink Thermal resistance Symbol Rth(j-c) Table 4. Symbol 35 TO-220AC, DPAK, D2PAK IFSM Table 3. V Tc = 105 °C Average forward current, δ = 0.5 1. 600 A TO-220AC, TO-220FPAC, D PAK dP tot 1 --------------- < -------------------------dT j R th ( j – a ) Unit 18 2 IF(AV) Tj Value Parameter 2PAK 3.5 TO-220AC, DPAK, D Junction to case TO-220FPAC 6 °C/W Static electrical characteristics Parameter IR(1) Reverse leakage current VF(2) Forward voltage drop Test conditions Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C VR = VRRM IF = 10 A Min. Typ. Max. - - 5 - 13 130 - - 2 - 1.3 1.6 Unit µA V 1. Pulse test: tp = 5 ms, δ < 2 % 2. Pulse test: tp = 380 µs, δ < 2 % To evaluate the conduction losses use the following equation: P = 1.20 x IF(AV) + 0.040 x IF2(RMS) Table 5. Symbol trr IRM tfr VFP 2/10 Dynamic electrical characteristics Parameter Test conditions Min. Typ. Max. Unit Reverse recovery time IF = 1 A, dIF/dt = -50 A/µs, VR = 30 V, Tj = 25 °C - 35 50 ns Reverse recovery current IF = 10 A, dIF/dt = -50 A/µs, VR = 400 V, Tj = 125 °C - 2.0 2.8 A Forward recovery time dIF/dt = 100 A/µs IF = 10 A VFR = 1.1 x VFmax, Tj = 25 °C - - 230 ns Forward recovery voltage dIF/dt = 100 A/µs IF = 10 A VFR = 1.1 x VFmax, Tj = 25 °C - 4 - V Doc ID 15858 Rev 2 STTH10LCD06 Figure 1. Characteristics Conduction losses versus average current Figure 2. PF(AV)(W) 100 22 δ=0.05 20 δ=0.1 δ=0.2 Forward voltage drop versus forward current IFM(A) δ=1 δ=0.5 90 18 80 16 Tj=150°C (Maximum values) 70 14 60 12 Tj=150°C (Typical values) 50 10 40 8 T 20 4 IF(AV)(A) 2 δ=tp/T 10 tp VFM(V) 0 0 0 1 Figure 3. 2 3 4 5 6 7 8 9 10 11 0.0 12 0.5 Relative variation of thermal Figure 4. impedance junction to case versus pulse duration Zth(j-c)/Rth(j-c) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Relative variation of thermal impedance junction to case versus pulse duration (TO-220FPAC) Zth(j-c)/Rth(j-c) 1.0 1.0 Single pulse 0.9 Tj=25°C (Maximum values) 30 6 Single pulse TO-220FPAC 0.9 2 TO-220AC, DPAK and D PAK 0.8 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.2 0.1 tp(s) 0.1 0.0 1.E-03 1.E-02 Figure 5. 12 1.E-01 1.E+00 Peak reverse recovery current versus dIF/dt (typical values) 1.E-02 Figure 6. IRM(A) 220 IF = 10A VR=400V 11 tp(s) 0.0 1.E-03 1.E-01 180 9 160 8 140 7 trr(ns) IF = 10A VR=400V 120 Tj = 125 °C 1.E+01 Reverse recovery time versus dIF/dt (typical values) 200 10 6 1.E+00 Tj = 125 °C 100 5 80 4 Tj = 25 °C 60 3 40 2 Tj = 25 °C 1 20 dIF/dt(A/µs) 10 100 dIF/dt(A/µs) 0 0 1000 0 Doc ID 15858 Rev 2 50 100 150 200 250 300 350 400 450 500 3/10 Characteristics Figure 7. STTH10LCD06 Reverse recovery charges versus dIF/dt (typical values) Figure 8. Qrr(nC) 500 1.00 IF = 10A VR=400V 450 Relative variations of dynamic parameters versus junction temperature 0.90 0.80 400 0.70 350 IRM 0.60 Tj = 125 °C 300 0.50 250 Qrr 0.40 200 0.30 Tj = 25 °C 150 0.20 100 0.10 50 dIF/dt(A/µs) 0.00 0 25 10 100 Figure 9. 12 50 75 100 125 1000 Transient peak forward voltage versus dIF/dt (typical values) Figure 10. Forward recovery time versus dIF/dt (typical values) VFP(V) 400 IF=IF(AV) Tj=125°C 11 IF=IF(AV) VR=400V Reference: Tj=125°C Tj(°C) tfr(ns) IF=IF(AV) VFR=1.1 x V F max. Tj=125°C 350 10 300 9 8 250 7 200 6 5 150 4 100 3 2 50 dIF/dt(A/µs) 1 dIF/dt(A/µs) 0 0 0 100 200 300 400 0 500 100 200 300 Figure 11. Junction capacitance versus reverse voltage applied (typical values) C(pF) 100 F=1MHz Vosc=30mVRMS Tj=25°C 10 VR(V) 1 1 4/10 10 100 Doc ID 15858 Rev 2 1000 400 500 STTH10LCD06 2 Package information Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 0.4 to 0.6 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. TO-220AC dimensions Dimensions Ref. A H2 ØI C L5 L7 L6 L2 F1 Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 D L9 L2 L4 F M E G 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M Diam. I Doc ID 15858 Rev 2 16.40 typ. 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 5/10 Package information STTH10LCD06 Table 7. TO-220FPAC dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 A B H Dia L6 L2 L7 L3 L5 F1 D L4 L2 F E 16 Typ. 0.63 Typ. L3 28.6 30.6 1.126 1.205 L4 9.8 10.6 0.386 0.417 L5 2.9 3.6 0.114 0.142 L6 15.9 16.4 0.626 0.646 L7 9.00 9.30 0.354 0.366 Dia. 3.00 3.20 0.118 0.126 G1 G 6/10 Doc ID 15858 Rev 2 STTH10LCD06 Package information Table 8. DPAK dimensions Dimensions Ref. E A B2 C2 Millimeters Inches Min. Max. Min. Max. A 2.20 2.40 0.086 0.094 A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.212 C 0.45 0.60 0.017 0.023 C2 0.48 0.60 0.018 0.023 D 6.00 6.20 0.236 0.244 E 6.40 6.60 0.251 0.259 G 4.40 4.60 0.173 0.181 H 9.35 10.10 0.368 0.397 L2 D R H L4 A1 B G R C A2 0.60 MIN. L2 V2 0.80 typ. 0.031 typ. L4 0.60 1.00 0.023 0.039 V2 0° 8° 0° 8° Figure 12. Footprint (dimensions in mm) 6.7 3 3 1.6 2.3 6.7 2.3 1.6 Doc ID 15858 Rev 2 7/10 Package information Table 9. STTH10LCD06 D2PAK dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.14 1.70 0.045 0.067 C 0.45 0.60 0.017 0.024 C2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.40 0.393 0.409 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.40 0.050 0.055 L3 1.40 1.75 0.055 0.069 M 2.40 3.20 0.094 0.126 A E C2 L2 D L L3 A1 B2 R C B G A2 M * V2 * FLAT ZONE NO LESS THAN 2mm R V2 0.40 typ. 0° 8° Figure 13. Footprint (dimensions in mm) 16.90 10.30 5.08 1.30 8.90 8/10 Doc ID 15858 Rev 2 3.70 0.016 typ. 0° 8° STTH10LCD06 3 Ordering information Ordering information Table 10. 4 Ordering information Order code Marking Package Weight STTH10LCD06D STTH10LCD06D TO-220AC 1.86 g 50 Tube STTH10LCD06FP STTH10LCD06FP TO-220FPAC 1.8 g 50 Tube 2 Base qty. Delivery mode STTH10LCD06SG-TR STTH10LCD06SG D PAK 1.8 g 1000 Tape and reel STTH10LCD06SB-TR DPAK 1.8 g 2500 Tape and reel TH10LCD06SB Revision history Table 11. Document revision history Date Revision Description of changes 15-Jul-2009 1 First issue 30-Sep-2010 2 Updated value of IFSM in Table 2. Doc ID 15858 Rev 2 9/10 STTH10LCD06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 15858 Rev 2