STTH30R04 Ultrafast recovery diode Main product characteristics IF(AV) A 30 A VRRM 400 V Tj 175° C VF (typ) 0.97 V trr 24 ns K A A K TO-220AC STTH30R04D Features and benefits K ■ Ultrafast switching ■ Low reverse current ■ Low thermal resistance ■ Reduces switching and conduction losses ■ High junction temperature ■ Insulated package: DOP3I – Electrical insulation = 2500 VRMS Package capacitance = 12 pF DO-247 STTH30R04W K A A A A A D2PAK STTH30R04G K DOP3I STTH30R04PI Note: D2PAK - 2 anode terminals must be shorted on www.DataSheet4U.com board. Order codes Description The compromise-free, high quality design of this diode has produced a device with low leakage current, regularly reproducible characteristics and intrinsic ruggedness. These characteristics make it ideal for heavy duty applications that demand long term reliability. Table 1. K Part Number Marking STTH30R04D STTH30R04D STTH30R04G STTH30R04G STTH30R04G-TR STTH30R04G STTH30R04W STTH30R04W STTH30R04PI STTH30R04PI Absolute ratings (limiting values at 25° C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 400 V IF(RMS) RMS forward current 50 A 30 A TO-220AC / DO-247 / D 2PAK Tc = 120° C IF(AV) Average forward current, δ = 0.5 IFRM Repetitive peak forward current 500 A IFSM Surge non repetitive forward current tp = 10 ms Sinusoidal Storage temperature range 300 A -65 to +175 °C Maximum operating junction temperature range -40 to +175 °C Tstg Tj March 2007 DOP3I tp = 10 µs, F = 1 kHz Rev 1 Tc = 90° C 1/10 www.st.com Characteristics 1 STTH30R04 Characteristics Table 2. Thermal parameters Symbol Rth(j-c) Table 3. Symbol Parameter Value TO-220AC / DO-247 / D2PAK 1.15 DOP3I 1.9 Junction to case °C/W Static electrical characteristics Parameter Test conditions Min Typ Tj = 25° C IR (1) Reverse leakage current Tj = 100° C Tj = 25° C Tj = 150° C Forward voltage drop VR = VRRM 3 30 15 150 Unit µA 1.26 IF = 15 A 0.8 1.0 1.45 Tj = 25° C Tj = 100° C Max 15 Tj = 125° C VF(2) Unit IF = 30 A V 1.3 Tj = 150° C 0.97 1.2 1. Pulse test: tp = 5 ms, δ < 2 % 2. Pulse test: tp = 380 µs, δ < 2 % To evaluate the conduction losseswww.DataSheet4U.com use the following equation: P = 0.9 x IF(AV) + 0.01 x IF2(RMS) Table 4. Symbol trr Dynamic characteristics Parameter Reverse recovery time Test conditions Min Typ Max IF = 1 A, dIF/dt = -200 A/µs, VR = 30 V, Tj = 25° C 24 35 IF = 1 A, dIF/dt = -15 A/µs, VR = 30 V, Tj = 25° C 78 100 IF = 1 A, IR = 1 A, IRR = 0.25 A, Tj = 25° C IRM tfr VFP 2/10 Reverse recovery current IF = 30 A, dIF/dt = -200 A/µs, VR = 160 V, Tj = 125° C Forward recovery time dIF/dt = 100 A/µs IF = 30 A VFR = 1.1 x VFmax, Tj = 25° C Forward recovery voltage dIF/dt = 100 A/µs IF = 30 A VFR = 1.1 x VFmax, Tj = 25° C Unit ns 50 10 2.9 14 A 500 ns V STTH30R04 Figure 1. Characteristics Conduction losses versus average current Figure 2. P(W) IFM(A) 200 50 δ=0.5 45 δ=1 180 δ=0.2 40 TJ=150°C (Maximum values) 160 δ=0.1 35 Forward voltage drop versus forward current 140 δ=0.05 30 120 25 100 20 80 15 TJ=150°C (Typical values) 60 T 10 40 5 δ=tp/T IF(AV)(A) TJ=25°C (Maximum values) 20 tp 0 VFM(V) 0 0 5 Figure 3. 10 15 20 25 30 35 40 Relative variation of thermal impedance junction to case versus pulse duration 0.0 0.2 0.4 Figure 4. Zth(j-c)/Rth(j-c) 1.0 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Peak reverse recovery current versus dIF/dt (typical values) IRM(A) 22 Single pulse TO-220AC D²PAK DO-247 DOP-3I 0.6 IF= 30 A VR=320 V 20 18 16 14 12 Tj=125° C 10 8 6 Tj=25° C www.DataSheet4U.com 4 2 tp(s) 0.1 1.E-03 Figure 5. 180 1.E-02 1.E-01 1.E+00 Reverse recovery time versus dIF/dt (typical values) 750 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 IF= 30 A VR=320 V 160 140 120 Tj=125° C 80 60 Tj=25° C 40 20 dIF/dt(A/µs) 0 10 100 10 100 Figure 6. tRR(ns) 100 dIF/dt(A/µs) 0 1000 1000 Reverse recovery charges versus dIF/dt (typical values) QRR(nC) IF= 30 A VR=320 V Tj=125° C Tj=25° C dIF/dt(A/µs) 10 100 1000 3/10 Characteristics Figure 7. STTH30R04 Figure 8. Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, eCU = 35 µm) Rth(j-a) (°C/W) 1.4 80 QRR [Tj]/QRR [Tj = 125° C] and IRM [Tj]/IRM [Tj = 125° C] IF= 30 A VR=320 V D²PAK 70 1.2 60 Relative variations of dynamic parameters versus junction temperature 1.0 50 IRM 0.8 40 0.6 30 QRR 0.4 20 0.2 10 SCU(cm²) T j(°C) 0.0 0 0 2 Figure 9. 4 6 8 10 12 14 16 18 20 Transient peak forward voltage versus dIF/dt (typical values) 2000 IF=30 A Tj=125 °C 5 50 75 100 150 tFR(ns) IF=30 A VFR=1.1 x V F max. Tj=125°C 1800 4 1600 4 1400 3 1200 3 1000 2 800 2 600 www.DataSheet4U.com 1 400 1 125 Figure 10. Forward recovery time versus dIF/dt (typical values) VFp(V) 5 25 dIF/dt(A/µs) 200 dIF/dt(A/µs) 0 0 0 50 100 150 200 250 300 350 400 450 500 Figure 11. Junction capacitance versus reverse voltage applied (typical values) C(pF) 1000 F=1MHz VOSC=30mVRMS Tj=25°C 100 VR(V) 10 1 4/10 10 100 1000 0 100 200 300 400 500 STTH30R04 2 Package information Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 0.8 Nm (TO-220FPAC) / 0.55 Nm (TO-220AC, DOP3I) ● Maximum torque value: 1.0 Nm (TO-220FPAC) / 0.70 Nm (TO-220AC, DOP31) Table 5. D2PAK dimensions Dimensions Ref. A E C2 L2 D L L3 A1 B2 R C B www.DataSheet4U.com G A2 M * V2 * FLAT ZONE NO LESS THAN 2mm Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.14 1.70 0.045 0.067 C 0.45 0.60 0.017 0.024 C2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.40 0.393 0.409 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.40 0.050 0.055 L3 1.40 1.75 0.055 0.069 M 2.40 3.20 0.094 0.126 R V2 0.40 typ. 0° 0.016 typ. 8° 0° 8° Figure 12. D2PAK footprint (dimensions in mm) 16.90 10.30 5.08 1.30 8.90 3.70 5/10 Package information STTH30R04 Table 6. DO-247 dimensions Dimensions Ref. Millimeters Min. V Typ. Inches Max. Min. Typ. Max. A 4.85 5.15 0.191 0.203 D 2.20 2.60 0.086 0.102 E 0.40 0.80 0.015 0.031 F 1.00 1.40 0.039 0.055 Dia V F2 2.00 0.078 A H F3 2.00 G 2.40 0.078 10.90 0.094 0.429 L5 L L2 L4 F2 L3 L1 15.45 15.75 0.608 0.620 L 19.85 20.15 0.781 0.793 L1 3.70 4.30 0.169 L2 F3 D V2 L3 F G H M E www.DataSheet4U.com 18.50 14.20 0.728 14.80 0.559 0.582 L4 34.60 1.362 L5 5.50 0.216 M 2.00 3.00 0.078 0.118 V 5° 5° V2 60° 60° Dia. 6/10 0.145 3.55 3.65 0.139 0.143 STTH30R04 Package information Table 7. TO-220AC dimensions Dimensions Ref. A H2 ØI C L5 L7 L6 L2 F1 D L9 F M E G www.DataSheet4U.com Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 L2 L4 Millimeters 16.40 typ. 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M Diam. I 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 7/10 Package information STTH30R04 Table 8. DOP3I dimensions Dimensions Ref. E A E1 R c ØP G Y D L c1 b Q e Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 b 1.20 1.40 0.047 0.055 c 1.45 1.55 0.057 0.061 c1 0.50 0.70 0.020 0.028 D 12.15 13.10 0.474 0.516 E 15.10 15.50 0.594 0.610 E1 7.55 7.75 0.297 0.305 e 10.80 11.30 0.425 0.445 G 20.4 21.10 0.815 0.831 L 14.35 15.60 0.565 0.614 P 4.08 4.17 0.161 0.164 Q 2.70 2.90 0.106 0.114 R Y 4.60 typ. 15.80 16.50 0.181 typ. 0.622 0.650 In order to meet environmental requirements, www.DataSheet4U.com ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 8/10 STTH30R04 3 4 Ordering information Ordering information Part Number Marking Package Weight Base qty Delivery mode STTH30R04D STTH30R04D TO-220AC 1.86 g 50 Tube 2 STTH30R04G STTH30R04G D PAK 1.48 g 50 Tube STTH30R04G-TR STTH30R04G D2PAK 1.48 g 1000 Tape and reel STTH30R04W STTH30R04W DO-247 4.40 g 30 Tube STTH30R04PI STTH30R04PI DOP3I 4.46 g 30 Tube Revision history Date Revision 31-Mar-2007 1 Description of Changes First issue. www.DataSheet4U.com 9/10 STTH30R04 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED www.DataSheet4U.com WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10