STMICROELECTRONICS T1035H-6T

T1035H, T1050H
Snubberless™
High temperature 10 A Triacs
Main characteristics
A2
Symbol
Value
Unit
IT(RMS)
10
A
VDRM/VRRM
600
V
IGT
35 or 50
mA
G
A1
A2
A2
Features
■
Medium current Triac
■
150° C max. Tj turn-off commutation
■
Low thermal resistance with clip bonding
■
Very high 3 quadrant commutation capability
■
Packages are RoHS (2002/95/EC) compliant
A2
G
G
A2
A1
A1
D2PAK
T10xxH-6G
TO-220AB
T10xxH-6T
G
Applications
A2
A1
Especially designed to operate in high power
density or universal motor applications such as
vacuum cleaner and washing machine drum
motor, these 10 A triacs provide a very high
switching capability up to junction temperatures of
150° C.
TO-220AB Insulated
T10xxH-6I
Order codes
The heatsink can be reduced, compared to
traditional triacs, according to the high
performance at given junction temperatures.
Description
Available in through-hole or surface mount
packages, the T1035H and T1050H triac series
are suitable for general purpose mains power AC
switching.
Part Numbers
Marking
T1035H-6G
T1035H 6G
T1050H-6G
T1050H 6G
T1035H-6G-TR
T1035H 6G
T1050H-6G-TR
T1050H 6G
T1035H-6T
T1035H 6T
T1050H-6T
T1050H 6T
T1035H-6I
T1035H 6I
T1050H-6I
T1050H 6I
TM: Snubberless is a trademark of STMicroelectronics
April 2007
Rev 1
1/10
www.st.com
10
Characteristics
T1035H, T1050H
1
Characteristics
Table 1.
Absolute Maximum Ratings
Symbol
IT(RMS)
ITSM
I ²t
dI/dt
VDSM/VRSM
IGM
PG(AV)
Tstg
Tj
Table 2.
Parameter
D2PAK, TO-220AB
Tc = 135° C
TO-220AB Ins
Tc = 125° C
RMS on-state current (full sine wave)
Value
Unit
10
A
Non repetitive surge peak on-state
current (full cycle, Tj initial = 25° C)
F = 50 Hz
t = 20 ms
100
F = 60 Hz
t = 16.7 ms
105
I²t Value for fusing
tp = 10 ms
Critical rate of rise of on-state current
IG = 2 x IGT , tr ≤ 100 ns
F = 120 Hz
Non repetitive surge peak off-state
voltage
Peak gate current
A
66
A²s
Tj = 150° C
50
A/µs
tp = 10 ms
Tj = 25° C
VDRM/VRRM
+ 100
V
tp = 20 µs
Tj = 150° C
4
A
Tj = 150° C
1
W
- 40 to + 150
- 40 to + 150
°C
Average gate power dissipation
Storage junction temperature range
Operating junction temperature range
Electrical Characteristics (Tj = 25° C, unless otherwise specified)
Value
Symbol
IGT (1)
VGT
Test Conditions
VD = 12 V RL = 33 Ω
VGD
VD = VDRM, RL = 3.3 kΩ
IH (2)
IT = 500 mA
IL
IG = 1.2 IGT
Quadrant
Unit
(dI/dt)c (2)
35
50
MAX.
I - II - III
MAX.
1.0
V
I - II - III
MIN.
0.15
V
MAX.
35
75
50
90
80
110
MAX.
II
mA
mA
mA
VD = 67% VDRM, gate open, Tj = 150° C
MIN.
1000
1500
V/µs
Without snubber, Tj = 150° C
MIN.
13
18
A/ms
1. minimum IGT is guaranted at 20% of IGT max.
2. for both polarities of A2 referenced to A1.
2/10
T1050H
I - II - III
I - III
dV/dt (2)
T1035H
T1035H, T1050H
Table 3.
Characteristics
Static Characteristics
Symbol
VT (1)
Test Conditions
Value
Unit
ITM = 14 A, tp = 380 µs
Tj = 25° C
MAX.
1.5
V
Vt0
(1)
Threshold voltage
Tj = 150° C
MAX.
0.80
V
Rd
(1)
Dynamic resistance
Tj = 150° C
MAX.
34
mΩ
Tj = 25° C
MAX.
5
µA
Tj = 150° C
MAX.
3.6
VD/VR = 400 V (at peak mains voltage) Tj = 150° C
MAX.
3.0
VD/VR = 200 V (at peak mains voltage) Tj = 150° C
MAX.
2.5
VDRM = VRRM
IDRM
IRRM
(2)
mA
1. for both polarities of A2 referenced to A1.
2. tp = 380 µs
Table 4.
Thermal resistance
Symbol
Parameter
Rth(j-c)
D2PAK / TO-220AB
1.45
TO-220AB Ins
3.4
D2PAK
45
TO-220AB / TO-220AB Ins
60
Unit
Junction to case (AC)
S=1
Rth(j-a)
Figure 1.
Value
cm2
° C/W
Junction to ambient
Maximum power dissipation versus Figure 2.
RMS on-state current (full cycle)
RMS on-state current versus case
temperature (full cycle)
IT(RMS) (A)
P(W)
11
12
α=180 °
10
TO-220AB/D²PAK
10
9
8
TO-220AB
Insulated
8
7
6
6
5
4
4
3
180°
2
2
α=180 °
1
TC(°C)
IT(RMS)(A)
0
0
1
2
3
4
5
0
6
7
8
9
10
0
25
50
75
100
125
150
3/10
Characteristics
Figure 3.
T1035H, T1050H
Figure 4.
RMS on-state current versus
ambient temperature (Epoxy
printed circuit board FR4,
copper thickness = 35 µm)
IT(RMS) (A)
1.0E+02
4.5
Variation of thermal impedance
versus pulse duration
Zth(°C/W)
α=180 °
D²PAK
SCU=1 cm²
4.0
Zth(j-a)
3.5
1.0E+01
3.0
2.5
Zth(j-c)
2.0
1.0E+00
1.5
1.0
0.5
Tamb(°C)
0.0
0
25
Figure 5.
100
50
tP(s)
1.0E-01
75
100
125
1.0E-03
150
1.0E-02
On-state characteristics (maximum Figure 6.
values)
ITM(A)
110
1.0E-01
1.0E+00
1.0E+01
1.0E+02
1.0E+03
Surge peak on-state current versus
number of cycles
ITSM (A)
100
90
Tj=150 °C
t=20ms
Non repetitive
Tj initial=25 °C
80
One cycle
70
60
Tj=25 °C
10
50
Repetitive
Tc=125 °C
40
30
Tj max. :
Vt0 = 0.80 V
Rd = 34 mΩ
20
10
VTM(V)
0.0
0.5
Figure 7.
10000
1.0
1.5
2.0
2.5
Number of cycles
0
1
3.0
3.5
4.0
4.5
1
5.0
10
Non-repetitive surge peak on-state Figure 8.
current for a sinusoidal pulse with
width tp < 10 ms and corresponding
value of I2t
100
1000
Relative variation of gate trigger
current, holding current and
latching current versus junction
temperature (typical values)
IGT, IH, IL [T j] / IGT, IH, IL [T j=25°C]
ITSM(A), I²t (A²s)
2.5
Tj initial=25 °C
dI/dt limitation: 50 A/µs
IGT
2.0
1000
1.5
ITSM
IH & IL
1.0
100
I²t
0.5
0.01
4/10
Tj(°C)
tP(ms)
10
0.0
0.10
1.00
10.00
-40
-20
0
20
40
60
80
100
120
140
160
T1035H, T1050H
Figure 9.
2.0
Characteristics
Relative variation of critical rate of
decrease of main current (dI/dt)c
versus reapplied (dV/dt)c
(typical values)
Figure 10. Relative variation of critical rate of
decrease of main current versus
junction temperature
(dI/dt)c [T j] / (dI/dt)c [T j=150°C]
(dI/dt)c [ (dV/dt) c ] / Specified (dI/dt) c
8
1.8
7
1.6
6
1.4
1.2
5
1.0
4
0.8
3
0.6
2
0.4
1
0.2
(dV/dt)C (V/µs)
0.0
0.1
1.0
100.0
Figure 11. Leakage current versus junction
temperature for different values of
blocking voltage (typical values)
1.0E+04
T j(°C)
0
10.0
25
50
75
100
125
150
Figure 12. Variation of thermal resistance
junction to ambient versus copper
surface under tab (Epoxy printed
circuit board FR4,
copper thickness = 35 µm)
Rth(j-a) (°C/W)
IDRM/IRRM(µA)
80
D²PAK
70
VDRM=VRRM=600 V
1.0E+03
60
VDRM=VRRM=400 V
50
1.0E+02
VDRM=VRRM=200 V
40
1.0E+01
30
20
1.0E+00
10
SCU(cm²)
T j(°C)
1.0E-01
50
75
100
0
125
150
0
5
10
15
20
25
30
35
40
5/10
Ordering information
2
T1035H, T1050H
Ordering information
T 10 xx H - 6 y
Triac series
Current
10 = 10 A
Sensitivity
35 = 35 mA
50 = 50 mA
High temperature
Voltage
6 = 600 V
Package
G = D2PAK
T = TO-220AB
I = TO-220AB Ins
Packing
Blank = Tube (D2PAK, TO-220AB)
-TR = Tape and reel (D2PAK)
6/10
-TR
T1035H, T1050H
3
Package mechanical data
Package mechanical data
●
Epoxy meets UL94, V0
●
Recommended torque 0.4 to 0.6 Nm
Table 5.
D2PAK dimensions
Dimensions
Ref.
Millimeters
Min.
A
E
C2
L2
D
L
L3
Typ.
Inches
Max.
Min.
Typ.
Max.
A
4.30
4.60
0.169
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.70
0.93
0.027
0.037
B2
1.25
C
0.45
0.60
0.017
0.024
C2
1.21
1.36
0.047
0.054
D
8.95
9.35
0.352
0.368
E
10.00
10.28 0.393
0.405
G
4.88
5.28
0.192
0.208
L
15.00
15.85 0.590
0.624
L2
1.27
1.40
0.050
0.055
L3
1.40
1.75
0.055
0.069
1.40
0.048 0.055
A1
B2
R
C
B
G
A2
2mm min.
FLAT ZONE
V2
R
V2
0.40
0°
0.016
8°
0°
8°
Figure 13. Footprint (dimensions in mm)
16.90
10.30
5.08
1.30
8.90
3.70
7/10
Package mechanical data
Table 6.
T1035H, T1050H
TO-220AB and TO-220AB Ins dimensions
Dimensions
Ref.
Millimeters
Min.
A
15.20
a1
C
B
ØI
Typ.
Max.
Inches
Min.
Typ.
15.90 0.598
3.75
Max.
0.625
0.147
a2
13.00
14.00 0.511
0.551
B
10.00
10.40 0.393
0.409
b1
0.61
0.88 0.024
0.034
b2
1.23
1.32 0.048
0.051
C
4.40
4.60 0.173
0.181
c1
0.49
0.70 0.019
0.027
c2
2.40
2.72 0.094
0.107
e
2.40
2.70 0.094
0.106
F
6.20
6.60 0.244
0.259
ØI
3.75
3.85 0.147
0.151
I4
15.80 16.40 16.80 0.622 0.646 0.661
L
2.65
2.95 0.104
0.116
l2
1.14
1.70 0.044
0.066
l3
1.14
1.70 0.044
0.066
b2
L
F
A
I4
l3
c2
a1
l2
a2
M
b1
e
c1
M
2.60
0.102
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
8/10
T1035H, T1050H
4
5
Ordering Information
Ordering Information
Ordering type
Marking
Package
Weight
Base qty
Delivery mode
T10xxH-6G
T10xxH 6G
D2PAK
1.5 g
50
Tube
2
T10xxH-6G-TR
T10xxH 6G
D PAK
1.5 g
1000
Tape and reel
T10xxH-6T
T10xxH 6T
TO-220AB
2.3 g
50
Tube
T10xxH-6I
T10xxH 6I
TO-220AB Ins
2.3 g
50
Tube
Revision history
Date
Revision
17-Apr-2007
1
Description of Changes
First issue
9/10
T1035H, T1050H
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
10/10