TYN612M 12 A SCR Main features A Symbol Value Unit IT(RMS) 12 A VDRM/VRRM 600 V IGT (min / max) 1.5 / 5 mA G K A K Description A G K TO-220FPAB TYN612MFP Order codes The insulated fullpack package allows a back to back configuration. Part Numbers Marking TYN612MRG TYN612M TYN612MFP TYN612MFP Absolute ratings (limiting values) Symbol Parameter IT(RMS) RMS on-state current (180° conduction angle) IT(AV) Average on-state current (180° conduction angle) ITSM Non repetitive surge peak on-state current I²t G TO-220AB TYN612MRG The TYN612M SCR is suitable to fit modes of control found in applications such as voltage regulation circuits for motorbikes, overvoltage crowbar protection, motor control circuits in power tools and kitchen aids, inrush current limiting circuits, capacitive discharge ignition. Table 1. A Value TO-220AB Tc = 105° C 12 TO-220FPAB Tc = 70° C 12 TO-220AB Tc = 105° C 8 TO-220FPAB Tc = 70° C 8 tp = 8.3 ms tp = 10 ms Unit A A 125 Tj = 25° C A 120 I²t Value for fusing tp = 10 ms Tj = 25° C 72 A2S dI/dt Critical rate of rise of on-state current IG = 2 x IGT , tr ≤ 100 ns F = 60 Hz Tj = 125° C 50 A/µs IGM Peak gate current tp = 20 µs Tj = 125° C 4 A Tj = 125° C 1 W PG(AV) Average gate power dissipation Tstg Tj Storage junction temperature range Operating junction temperature range - 40 to + 150 - 40 to + 125 °C VRGM Maximum peak reverse gate voltage 5 V April 2007 Rev 4 1/8 www.st.com 8 Characteristics TYN612M 1 Characteristics Table 2. Electrical characteristics (Tj = 25° C, unless otherwise specified) Symbol IGT Test Conditions 1.5 MAX. 5 MIN. 0.5 TYP. 0.7 MAX. 1.3 MIN. 0.2 V MAX. 20 mA MAX. 40 mA Tj =125° C MIN. 50 V/µs Tj = 25° C MAX. 1.6 V mA RL = 140 Ω VD = 12 V VGD VD = VDRM RL = 3.3 kΩ IH IT = 500 mA Gate open IL IG = 1.2 IGT Tj = 125° C Gate open V dV/dt VD = 67 % VDRM VTM ITM = 24 A Vt0 Threshold voltage Tj = 125° C MAX. 0.85 V Rd Dynamic resistance Tj = 125° C MAX. 30 mΩ 5 µA 2 mA IDRM IRRM tp = 380 µs Tj = 25° C VDRM = VRRM Table 3. MAX. Tj = 125° C Thermal resistance Symbol Parameter Rth(j-c) Junction to case (DC) Rth(j-a) Junction to ambient (DC) Figure 1. Value TO-220AB 1.3 TO-220FPAB 4.5 TO-220AB 55 TO-220FPAB 55 Unit ° C/W ° C/W Maximum average power dissipation versus average on-state current Figure 2. P(W) Average and D.C. on-state current versus case temperature (TO-220AB) IT(AV)(A) 12 14 α = 180° 11 D.C. 13 12 10 11 9 10 8 9 7 8 6 7 5 6 α = 180° 5 4 4 3 3 2 2 1 1 IT(AV)(A) TC(°C) 0 0 0 2/8 Unit MIN. RL = 140 Ω VD = 12 V VGT Value 1 2 3 4 5 6 7 8 9 0 25 50 75 100 125 TYN612M Figure 3. Characteristics Average and D.C. on-state current versus case temperature (TO-220FPAB) Figure 4. Relative variation of thermal impedance versus pulse duration (TO-220AB) K=[Zth/Rth] IT(AV)(A) 1.E+00 14 D.C. 13 12 Rth(j-c) 11 10 9 α = 180° 8 7 Rth(j-a) 1.E-01 6 5 4 3 2 1 tp(s) TC(°C) 0 1.E-02 0 25 Figure 5. 50 75 100 125 Relative variation of thermal impedance versus pulse duration (TO-220FPAB) 1.E-03 1.E-02 Figure 6. 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 Relative variation of gate trigger current, holding current, latching current and gate trigger voltage versus junction temperature (typical values) IGT, IH, IL, VGT [T j] / IGT, IH, IL, VGT [T j=25°C] K=[Zth/Rth] 2.4 1.E+00 2.2 2.0 Rth(j-c) IGT 1.8 1.6 1.4 IH & IL 1.2 Rth(j-a) 1.E-01 1.0 VGT 0.8 0.6 0.4 Tj(°C) 0.2 tp(s) 0.0 1.E-02 1.E-03 Figure 7. 1.E-02 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 -40 -30 -20 -10 0 Surge peak on-state current versus Figure 8. number of cycles ITSM(A) 10 20 30 40 50 60 70 80 90 100 110 120 130 Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms, and corresponding values of I²t ITSM(A), I2t (A2s) 130 1000 Tj initial=25°C 120 110 ITSM 100 tp=10m s Non repetitive Tj initial=25°C 90 O ne cycle 80 70 100 60 I2t Repetitive TC=105°C 50 40 30 20 10 Number of cycles tP(ms) 0 10 1 10 100 1000 0.01 0.10 1.00 10.00 3/8 Ordering information scheme Figure 9. TYN612M On-state characteristics (maximum values) ITM(A) 100.00 Tj=125°C Tj max.: Vt0=0.85V Rd=0.030Ω 10.00 Tj=25°C 1.00 VTM(V) 0.10 0.0 2 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Ordering information scheme TYN 6 12 M FP RG Standard SCR Voltage 6 = 600V Current 12 = 12A Sensitivity M = 5mA Package FP = TO-220FPAB Blank = TO-220AB Packing mode RG = Tube (TO-220AB) Blank = Tube (TO-220FPAB) 4/8 TYN612M 3 Package information Package information ● Epoxy meets UL94, V0 Table 4. TO-220AB dimensions Dimensions Ref. Millimeters Min. A ØI 15.20 a1 C B b2 L F A I4 Typ. Max. Inches Min. Typ. 15.90 0.598 3.75 Max. 0.625 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 F 6.20 6.60 0.244 0.259 ØI 3.75 3.85 0.147 0.151 I4 15.80 16.40 16.80 0.622 0.646 0.661 L 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 l3 1.14 1.70 0.044 0.066 l3 c2 a1 l2 a2 M b1 e c1 M 2.60 0.102 5/8 Package information Table 5. TYN612M TO-220FPAB Dimensions Dimensions Ref. A B H Dia L6 L2 L7 L3 L5 F1 L4 F G Inches Min. Max. Min. Max. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.70 0.045 0.067 F2 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 D F2 G1 Millimeters L2 E 16 Typ. 0.63 Typ. L3 28.6 30.6 1.126 1.205 L4 9.8 10.6 0.386 0.417 L5 2.9 3.6 0.114 0.142 L6 15.9 16.4 0.626 0.646 L7 9.00 9.30 0.354 0.366 Dia. 3.00 3.20 0.118 0.126 In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 6/8 TYN612M 4 5 Ordering information Ordering information Ordering type Marking Package Weight Base qty Delivery mode TYN612MRG TYN612M TO-220AB 2.3 g 50 Tube TYN612MFP TYN612MFP TO-220AB 2.0 g 50 Tube Revision history Date Revision Description of Changes Sep-2002 1A 10-Fev-2005 2 TO-220FPAB package added. 11-Apr-2007 3 Reformatted to current standards. Added typical and minimum values for VGT in Table 2. 17-Apr-2007 4 Added VGT curve in Figure 6. Last update. 7/8 TYN612M Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8