STMICROELECTRONICS T2035H-6G-TR

T2035H, T2050H
High temperature 20 A Snubberless™ TRIACs
Features
■
Medium current TRIAC
■
150 °C max. Tj turn-off commutation
■
Low thermal resistance with clip bonding
■
Very high 3 quadrant commutation capability
■
Packages are RoHS (2002/95/EC) compliant
A2
G
A1
A2
Applications
Especially designed to operate in high power
density or universal motor applications such as
vacuum cleaner and washing machine drum
motor.
G
G
A2
A2
A1
A1
TO-220AB
T20xxH-6T
Description
Available in through-hole and sureface mount
packages , the T2035H and T2050H TRIAC
series are suitable for general purpose mains
power AC switching.
TO-220AB Insulated
T2035H-6I
A2
These 20 A TRIACs provide a very high switching
capability up to junction temperatures of 150 °C.
A2
G
A1
D2PAK
T20xxH-6G
The heatsink can be reduced, compared to
traditional TRIACs, according to the high
performance at given junction temperatures.
Table 1.
Device summary
Symbol
Value
Unit
IT(RMS)
20
A
VDRM/VRRM
600
V
IGT
35 or 50
mA
TM: Snubberless is a trademark of STMicroelectronics
November 2007
Rev 2
1/10
www.st.com
10
Characteristics
T2035H, T2050H
1
Characteristics
Table 2.
Absolute maximum ratings
Symbol
Parameter
Tc = 105 °C
F = 50 Hz
t = 20 ms
200
F = 60 Hz
t = 16.7 ms
210
Non repetitive surge peak on-state
current (full cycle, Tj initial = 25 °C)
I²t Value for fusing
tp = 10 ms
Critical rate of rise of on-state current
IG = 2 x IGT , tr ≤ 100 ns
F = 120 Hz
Non repetitive surge peak off-state
voltage
Peak gate current
IGM
PG(AV)
Tstg
Tj
Table 3.
A
TO-220AB Ins
ITSM
VDSM/VRSM
20
Tc = 130 °C
On-state rms current (full sine wave)
dI/dt
Unit
TO-220AB, D2PAK
IT(RMS)
I ²t
Value
A
265
A²s
Tj = 150 °C
50
A/µs
tp = 10 ms
Tj = 25 °C
VDRM/VRRM
+ 100
V
tp = 20 µs
Tj = 150 °C
4
A
Tj = 150 °C
1
W
- 40 to + 150
- 40 to + 150
°C
Average gate power dissipation
Storage junction temperature range
Operating junction temperature range
Electrical characteristics (Tj = 25 °C, unless otherwise specified)
Value
Symbol
IGT (1)
VGT
Test Conditions
VD = 12 V RL = 33 Ω
VGD
VD = VDRM, RL = 3.3 kΩ
IH (2)
IT = 500 mA
IL
IG = 1.2 IGT
Quadrant
Unit
(dI/dt)c (2)
35
50
MAX.
I - II - III
MAX.
1.0
V
I - II - III
MIN.
0.15
V
MAX.
35
75
50
90
80
110
MAX.
II
mA
mA
mA
VD = 67% VDRM, gate open, Tj = 150 °C
MIN.
1000
1500
V/µs
Without snubber, Tj = 150 °C
MIN.
27
36
A/ms
1. minimum IGT is guaranted at 20% of IGT max.
2. for both polarities of A2 referenced to A1.
2/10
T2050H
I - II - III
I - III
dV/dt (2)
T2035H
T2035H, T2050H
Table 4.
Characteristics
Static characteristics
Symbol
VT (1)
Test Conditions
Value
Unit
ITM = 28 A, tp = 380 µs
Tj = 25 °C
MAX.
1.5
V
Vt0
(1)
Threshold voltage
Tj = 150 °C
MAX.
0.80
V
Rd
(1)
Dynamic resistance
Tj = 150 °C
MAX.
19
mΩ
Tj = 25 °C
MAX.
5
µA
Tj = 150 °C
MAX.
6.2
VD/VR = 400 V (at peak mains voltage) Tj = 150 °C
MAX.
5.0
VD/VR = 200 V (at peak mains voltage) Tj = 150 °C
MAX.
4.0
VDRM = VRRM
IDRM
IRRM
(2)
mA
1. for both polarities of A2 referenced to A1.
2. tp = 380 µs.
Table 5.
Thermal resistance
Symbol
Parameter
Value
TO-220AB, D2PAK
Rth(j-c)
Unit
1
Junction to case (AC)
TO-220AB Ins
1.9
TO-220AB, TO-220AB Ins
60
D2PAK
45
°C/W
Rth(j-a)
Figure 1.
Junction to ambient
S = 1 cm2
Maximum power dissipation versus Figure 2.
on-state rms current
On-state rms current versus case
temperature
IT(RMS) (A)
P(W)
22
24
α=180 °
22
TO-220AB/D²PAK
20
20
18
18
16
16
TO-220AB
Insulated
14
14
12
12
10
10
8
8
6
6
180°
4
2
4
α=180 °
2
IT(RMS)(A)
TC(°C)
0
0
0
2
4
6
8
10
12
14
16
18
20
0
25
50
75
100
125
150
3/10
Characteristics
Figure 3.
T2035H, T2050H
On-state rms current versus
ambient temperature
Figure 4.
IT(RMS) (A)
1.0E+02
5.0
Variation of thermal impedance
versus pulse duration
Zth(°C/W)
D²PAK
SCU=1 cm²
4.5
Zth(j-a)
4.0
3.5
1.0E+01
3.0
Zth(j-c)
2.5
2.0
1.0E+00
1.5
1.0
α=180 °
0.5
Tamb(°C)
tP(s)
1.0E-01
0.0
0
25
Figure 5.
50
75
100
125
1.0E-03
150
On-state characteristics (maximum Figure 6.
values)
ITM(A)
1000
1.0E-02
220
1.0E-01
1.0E+00
1.0E+01
1.0E+02
1.0E+03
Surge peak on-state current versus
number of cycles
ITSM (A)
200
180
t=20ms
Non repetitive
Tj initial=25 °C
160
One cycle
100
140
Tj=150 °C
120
100
Tj=25 °C
Repetitive
Tc=110 °C
80
10
60
VTM(V)
1
0.0
Figure 7.
10000
0.5
1.0
1.5
2.0
2.5
40
Tj max. :
VT0 = 0.80 V
RD = 19 mΩ
20
Number of cycles
0
3.0
3.5
4.0
1
4.5
10
Non-repetitive surge peak on-state Figure 8.
current for a sinusoidal pulse with
width tp < 10 ms and corresponding
value of I2t
100
1000
Relative variation of gate trigger
current, holding current and
latching current versus junction
temperature (typical values)
IGT, IH, IL [T j] / IGT, IH, IL [T j=25°C]
ITSM(A), I²t (A²s)
2.5
Tj initial=25 °C
IGT
2.0
dI/dt limitation: 50 A/µs
1.5
1000
IH & IL
ITSM
1.0
0.5
I²t
tP(ms)
100
0.01
4/10
Tj(°C)
0.0
0.10
1.00
10.00
-40
-20
0
20
40
60
80
100
120
140
160
T2035H, T2050H
Figure 9.
2.0
Characteristics
Relative variation of critical rate of
decrease of main current (dI/dt)c
versus reapplied (dV/dt)c
(typical values)
Figure 10. Relative variation of critical rate of
decrease of main current versus
junction temperature
(dI/dt)c [T j] / (dI/dt)c [T j=150°C]
(dI/dt)c [ (dV/dt) c ] / Specified (dI/dt) c
8
1.8
7
1.6
6
1.4
1.2
5
1.0
4
0.8
3
0.6
2
0.4
1
0.2
T j(°C)
(dV/dt)C (V/µs)
0.0
0
0.1
1.0
10.0
100.0
Figure 11. Leakage current versus junction
temperature for different values of
blocking voltage (typical values)
1.0E+04
25
50
75
100
125
150
Figure 12. Acceptable repetitive peak off-state
voltage versus case to ambient
thermal resistance
IDRM/IRRM(µA)
Rth(c-a) (°C/W)
40
VDRM=VRRM=600 V
Rth(j-c)=1.0 °C/W
TJ=150 °C
35
1.0E+03
30
VDRM=VRRM=400 V
25
1.0E+02
VDRM=VRRM=200 V
20
1.0E+01
15
10
1.0E+00
5
T j(°C)
VDRM/VRRM(V)
1.0E-01
0
50
75
100
125
150
300
350
400
450
500
550
600
Figure 13. Thermal resistance junction to
ambient versus copper surface
under tab
Rth(j-a) (°C/W)
80
D²PAK
70
60
50
40
30
20
10
SCU(cm²)
0
0
5
10
15
20
25
30
35
40
5/10
Ordering information
2
T2035H, T2050H
Ordering information
Figure 14. Ordering information
T 20 xx H - 6 Y - TR
Triac series
Current
20 = 20 A
Sensitivity
35 = 35 mA
50 = 50 mA
High temperature
Voltage
6 = 600 V
Package
T = TO-220AB
I = TO-220AB ins
G = D2PAK
Delivery mode
Blank = tube (TO-220AB, TO-220AB ins, D2PAK)
-TR = Tape and reel (D2PAK)
6/10
T2035H, T2050H
3
Package information
Package information
●
Epoxy meets UL94, V0
●
Recommended torque 0.4 to 0.6 Nm
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
Table 6.
TO-220AB and TO-220AB Ins dimensions
Dimensions
Ref.
Millimeters
Min.
A
15.20
a1
C
B
ØI
Typ.
Max.
Inches
Min.
Typ.
15.90 0.598
3.75
Max.
0.625
0.147
a2
13.00
14.00 0.511
0.551
B
10.00
10.40 0.393
0.409
b1
0.61
0.88 0.024
0.034
b2
1.23
1.32 0.048
0.051
C
4.40
4.60 0.173
0.181
c1
0.49
0.70 0.019
0.027
c2
2.40
2.72 0.094
0.107
e
2.40
2.70 0.094
0.106
F
6.20
6.60 0.244
0.259
ØI
3.75
3.85 0.147
0.151
I4
15.80 16.40 16.80 0.622 0.646 0.661
L
2.65
2.95 0.104
0.116
l2
1.14
1.70 0.044
0.066
l3
1.14
1.70 0.044
0.066
b2
L
F
A
I4
l3
c2
a1
l2
a2
M
b1
e
c1
M
2.60
0.102
7/10
Package information
Table 7.
T2035H, T2050H
D2PAK dimensions
Dimensions
Ref.
Millimeters
Min.
A
E
C2
L2
D
L
L3
Typ.
Inches
Max.
Min.
Typ.
Max.
A
4.30
4.60
0.169
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.70
0.93
0.027
0.037
B2
1.25
C
0.45
0.60
0.017
0.024
C2
1.21
1.36
0.047
0.054
D
8.95
9.35
0.352
0.368
E
10.00
10.28 0.393
0.405
G
4.88
5.28
0.192
0.208
L
15.00
15.85 0.590
0.624
L2
1.27
1.40
0.050
0.055
L3
1.40
1.75
0.055
0.069
1.40
0.048 0.055
A1
B2
R
C
B
G
A2
2mm min.
FLAT ZONE
V2
R
V2
0.40
0°
8°
Figure 15. D2PAK footprint (dimensions in mm)
16.90
10.30
5.08
1.30
8.90
8/10
3.70
0.016
0°
8°
T2035H, T2050H
4
Ordering information
Ordering information
Table 8.
5
Ordering information
Order code
Marking
Package
Weight
Base qty
Delivery mode
T20xxH-6T
T20xxH 6T
TO-220AB
2.3 g
50
Tube
T20xxH-6I
T20xxH 6T
TO-220AB Ins
2.3 g
50
Tube
2
T20xxH-6G
T20xxH 6G
D PAK
1.5 g
50
Tube
T20xxH-6G-TR
T20xxH 6G
D2PAK
1.5 g
1000
Tape and reel
Revision history
Table 9.
Document revision history
Date
Revision
Description of changes
31-May-2007
1
First issue
15-Nov-2007
2
Added TO-220AB Ins and D2PAK packages.
Reformatted to current standards.
9/10
T2035H, T2050H
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
10/10