TN1625 TYN616, TYN816 16 A standard SCRs Features A ■ IT(RMS) =16 A ■ VDRM/VRRM = 600 to 1000 V ■ IGT = 25 mA G K Description A A The standard TN16 / TYNx16 16 A SCRs series is suitable for general purpose applications. Using clip assembly technology, they provide a superior performance in surge current capabilities. K A K G G D2PAK (TN1625-x00G) Table 1. A TO-220AB (TYNx16RG) Device summary Parameter TN1625-600G TN1625-1000G Unit TYN616RG TYN816RG VDRM/VRRM 600 800 1000 V Sensitivity 25 25 25 mA November 2007 Rev 6 1/9 www.st.com 9 Characteristics TN1625, TYN616, TYN816 1 Characteristics Table 2. Absolute ratings (limiting values) Symbol Parameter Value Unit RMS on-state current (180 °Conduction angle) Tc = 110 °C 16 A IT(AV) Average on-state current (180 °Conduction angle) Tc = 110 °C 10 A ITSM Non repetitive surge peak on-state current IT(RMS) I2t tp = 8.3 ms tp = 10 ms 200 Tj = 25 °C A 190 I2t Value for fusing tp = 10 ms Tj = 25 °C 180 A2S dI/dt Critical rate of rise of on-state current IG = 2 x IGT , tr ≤ 100 ns F = 60 Hz Tj = 125 °C 50 A/µs IGM Peak gate current tp = 20 µs Tj = 125 °C 4 A Tj = 125 °C 1 W PG(AV) Average gate power dissipation Tstg Tj Storage junction temperature range Operating junction temperature range - 40 to + 150 - 40 to + 125 °C VRGM Maximum peak reverse gate voltage 5 V Value Unit Table 3. Electrical characteristics (Tj = 25 °C, unless otherwise specified) Symbol IGT Test Conditions RL = 33 Ω VD = 12 V VGT VGD VD = VDRM RL = 3.3 kΩ IH IT = 500 mA Gate open IL IG = 1.2 x IGT Tj = 125 °C MIN. 2 MAX. 25 MAX. 1.3 V MIN. 0.2 V MAX. 40 mA MAX. 60 mA mA dV/dt VD = 67 % VDRM Gate open Tj = 125 °C MIN. 500 V/µs VTM ITM = 32 A Tj = 25 °C MAX. 1.6 V Vt0 Threshold voltage Tj = 125 °C MAX. 0.77 V Rd Dynamic resistance Tj = 125 °C MAX. 23 mΩ 5 µA 2 mA IDRM IRRM Table 4. tp = 380 µs Tj = 125 °C Parameter Junction to case (DC) S = 01 Rth(j-a) cm2 Value Unit 1.1 °C/W D2PAK 45 TO-220AB 60 Junction to ambient (DC) S = copper surface under tab 2/9 MAX. Thermal resistance Symbol Rth(j-c) Tj = 25 °C VDRM = VRRM °C/W TN1625, TYN616, TYN816 Figure 1. Characteristics Maximum average power Figure 2. dissipation versus average on-state current Average and D.C. on-state current versus case temperature IT(AV)(A) P(W) 18 16 D.C. α = 180° 14 16 14 12 12 10 α = 180° 10 8 8 6 6 360° 4 2 IT(AV)(A) 2 4 2 α 0 0 4 6 8 Tcase(°C) 0 10 12 0 25 Average and D.C. on-state current Figure 4. versus ambient temperature (copper surface under tab: S=1cm2) (D2PAK) Figure 3. IT(AV)(A) 50 75 100 125 Relative variation of thermal impedance versus pulse duration K=[Zth/Rth] 4.0 1.00 3.5 Zth(j-c) 3.0 D.C. 2.5 2.0 0.10 α = 180° Zth(j-a) 1.5 1.0 0.5 tp(s) Tamb(°C) 0.01 0.0 0 25 Figure 5. 50 75 100 1E-3 125 Figure 6. Relative variation of gate trigger current, holding current and latching current versus junction temperature IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25°C] 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Surge peak on-state current versus number of cycles ITSM(A) 2.5 200 180 2.0 160 tp=10ms 140 1.5 One cycle Non repetitive Tj initial=25°C 120 IGT 100 IH & IL 1.0 Repetitive TC=110°C 80 60 40 0.5 20 Tj(°C) Number of cycles 0 0.0 -40 -20 0 20 40 60 80 100 120 140 1 10 100 1000 3/9 Characteristics Figure 7. TN1625, TYN616, TYN816 Non-repetitive surge peak on-state Figure 8. current for a sinusoidal pulse with width tp < 10 ms, and corresponding values of I2t ITM(A) ITSM(A), I2t (A2s) 200 2000 Tj initial = 25°C Tj max.: Vt0=0.77V Rd=23mΩ 100 1000 ITSM dI/dt limitation Tj=max I2t 10 100 tp(ms) 0.01 0.10 Figure 9. 1.00 10.00 Thermal resistance junction to ambient versus copper surface under tab (epoxy printed circuit board FR4, copper thickness: 35 µm) (D2PAK) Rth(j-a)(°C/W) 80 70 60 50 40 30 20 10 S(cm²) 0 4/9 4 8 12 16 20 Tj=25°C VTM(V) 1 10 0 On-state characteristics (maximum values) 24 28 32 36 40 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 TN1625, TYN616, TYN816 2 Ordering information scheme Ordering information scheme Figure 10. TN1625 TN 16 25 - 600 G (-TR) Standard SCR series Current 16 = 16 A Sensitivity 25 = 25 mA Voltage 600 = 600 V 1000 = 1000 V Package G = D2PAK Packing mode Blank = Tube -TR = Tape and reel Figure 11. TYNx16 TYN 6 16 RG Standard SCR series Voltage 6 = 600 V 8 = 800 V Current 16 = 16 A Packing mode RG = Tube 5/9 Package information 3 TN1625, TYN616, TYN816 Package information ● Epoxy meets UL94,V0 ● Cooling method: C ● Recommended torque value: 0.4 - 0.6 N·m In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. Table 5. TO-220AB dimensions Dimensions Ref. Millimeters Min. A 15.20 a1 C B ØI Typ. Max. Inches Min. Typ. 15.90 0.598 3.75 Max. 0.625 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 F 6.20 6.60 0.244 0.259 ØI 3.75 3.85 0.147 0.151 I4 15.80 16.40 16.80 0.622 0.646 0.661 L 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 l3 1.14 1.70 0.044 0.066 b2 L F A I4 l3 c2 a1 l2 a2 M b1 e c1 M 6/9 2.60 0.102 TN1625, TYN616, TYN816 Table 6. Package information D2PAK dimensions Dimensions Ref. Millimeters Min. A E C2 L2 D L L3 Typ. Inches Max. Min. Typ. Max. A 4.30 4.60 0.169 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.25 C 0.45 0.60 0.017 0.024 C2 1.21 1.36 0.047 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.28 0.393 0.405 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.40 0.050 0.055 L3 1.40 1.75 0.055 0.069 1.40 0.048 0.055 A1 B2 R C B G A2 2mm min. FLAT ZONE V2 R V2 0.40 0° 0.016 8° 0° 8° Figure 12. Footprint (dimensions in mm) 16.90 10.30 5.08 1.30 8.90 3.70 7/9 Ordering information 4 TN1625, TYN616, TYN816 Ordering information Table 7. Ordering information Order code(1) Marking(1) Package Weight TN1625-x00G TN1625x00G D2PAK 1.5 g 50 Tube TN1625-x00G-TR TN1625x00G D2 1.5 g 1000 Tape and reel TYNx16RG TYNx16 2.3 g 50 Tube PAK TO-220AB Base qty Delivery mode 1. x indicates votage, 6, 8 or 10 for 600, 800 and 1000 V respectively 5 Revision history Table 8. 8/9 Document revision history Date Revision Changes Apr-2002 4A 13-Feb-2006 5 TO-220AB delivery mode changed from bulk to tube. ECOPACK statement added. 07-Nov-2007 6 Reformatted to current standards. Table 2.: IT(RMS) value corrected from 12 A to 16 A Last update. TN1625, TYN616, TYN816 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9