TOSHIBA TC74VCX16646FT

TC74VCX16646FT
TOSHIBA CMOS Digital Integrated Circuit
Silicon Monolithic
TC74VCX16646FT
Low-Voltage 16-Bit Bus Transceiver/Register with 3.6-V Tolerant Inputs and Outputs
The TC74VCX16646FT is a high-performance CMOS 16-bit bus
transceiver/register. Designed for use in 1.8-V, 2.5-V or 3.3-V
systems, it achieves high-speed operation while maintaining the
CMOS low power dissipation.
It is also designed with overvoltage tolerant inputs and outputs
up to 3.6 V.
This device is bus transceiver with 3-state outputs, D-type
flip-flops, and control circuitry arranged for multiplexed
transmission of data directly from the internal registers.
All inputs are equipped with protection circuits against static
discharge.
Weight: 0.25 g (typ.)
Features (Note)
•
Low-voltage operation: VCC = 1.8 to 3.6 V
•
High-speed operation: tpd = 2.9 ns (max) (VCC = 3.0 to 3.6 V)
: tpd = 3.5 ns (max) (VCC = 2.3 to 2.7 V)
: tpd = 7.0 ns (max) (VCC = 1.8 V)
•
Output current : IOH/IOL = ±24 mA (min) (VCC = 3.0 V)
: IOH/IOL = ±18 mA (min) (VCC = 2.3 V)
: IOH/IOL = ±6 mA (min) (VCC = 1.8 V)
•
Latch-up performance: −300 mA
•
ESD performance: Machine model ≥ ±200 V
Human body model ≥ ±2000 V
•
Package: TSSOP
•
Bidirectional interface between 2.5 V and 3.3 V signals.
•
3.6-V tolerant function and power-down protection provided on all inputs and outputs
Note:
Do not apply a signal to any bus pins when it is in the output mode. Damage may result.
All floating (high impedance) bus pins must have their input level fixed by means of pull-up or pull-down resistors.
1
2007-10-19
TC74VCX16646FT
Pin Assignment (top view)
IEC Logic Symbol
1DIR
1
56
1OE
1CAB
2
55
1CBA
1SAB
3
54
1SBA
GND
4
53
GND
1A1
5
52
1B1
1A2
6
51
1B2
VCC
7
50
VCC
1A3
8
49
1B3
9
48
1B4
1A5 10
47
1B5
GND 11
46
GND
1A4
1A6 12
45
1B6
1A7 13
44
1B7
1A8 14
43
1B8
2A1 15
42
2B1
2A2 16
41
2B2
2A3 17
40
2B3
GND 18
39
GND
2A4 19
38
2B4
2A5 20
37
2B5
1OE
1DIR
1CBA
1SBA
1CAB
1SAB
2OE
2DIR
2CBA
2SBA
2CAB
2SAB
1A1
56
1
55
54
2
3
29
28
30
31
27
26
5
G3
3EN1 (BA)
3EN2 (AB)
C4
G5
C6
G7
G10
10EN8 (BA)
10EN9 (AB)
C11
G12
C13
G14
> 1
1
6D
1
1A2
1A3
1A4
1A5
1A6
1A7
1A8
2A1
2A6 21
36
2B6
VCC 22
35
VCC
2A7 23
34
2B7
2A8 24
33
2B8
GND 25
32
GND
2SAB 26
31
2SBA
2A4
2CAB 27
30
2CBA
2A5
2DIR 28
29
2OE
2A6
5
4D
5
7 >
1
7
2
52
1
6
51
8
49
9
48
10
47
12
45
13
44
14
43
15
> 1
8
12
1B1
11D
42
1B2
1B3
1B4
1B5
1B6
1B7
1B8
2B1
12 1
14 > 1
9
14 1
13D
2A2
2A3
2A7
2A8
2
16
41
17
40
19
38
20
37
21
36
23
34
24
33
2B2
2B3
2B4
2B5
2B6
2B7
2B8
2007-10-19
TC74VCX16646FT
Truth Table
Control Inputs
OE
H
DIR
CAB
CBA
SAB
SBA
X*
X*
X
X
X
X
X
X*
L
X*
L
X
X*
L
X
X*
H
X
H
X*
X*
X*
X*
X*
L
Bus
H
X
X
L
X
L
X
H
X
H
L
X*
X*
X*
A
B
Input
Input
Z
Z
X
X
Input
Output
L
L
H
H
L
L
H
H
X
Qn
L
L
H
H
Output
Input
L
L
H
H
L
L
H
H
Qn
X
L
L
H
H
Function
The output functions of A and B Busses are
disabled.
Both A and B Busses are used as inputs to
the internal flip-flops. Data on the Bus will be
stored on the rising edge of the Clock.
The data on the A bus are displayed on the
B bus.
The data on the A bus are displayed on the
B Bus, and are stored into the A storage
flip-flops on the rising edge of CAB.
The data in the A storage flop-flops are
displayed on the B Bus.
The data on the A Bus are stored into the A
storage flip-flops on the rising edge of CAB,
and the stored data propagate directly onto
the B Bus.
The data on the B Bus are displayed on the
A bus.
The data on the B Bus are displayed on the
A Bus, and are stored into the B storage
flip-flops on the rising edge of CBA.
The data in the B storage flip-flops are
displayed on the A Bus.
The data on the B Bus are stored into the B
storage flip-flops on the rising edge of CBA,
and the stored data propagate directly onto
the A Bus.
X: Don’t care
Z: High impedance
Qn: The data stored into the internal flip-flops by most recent low to high transition of the clock inputs.
*: The clocks are not internally with either OE or DIR.
Therefore, data on the A and/or B busses may be clocked into the storage flip-flops at any time.
3
2007-10-19
TC74VCX16646FT
System Diagram
56
1OE
1
1DIR
1A1
φA
5
D
Q
φA
CK
φB
Q
φB
D
52 1B1
CK
1A8
1CAB
1SAB
14
2
3
55
φA
φB
φA
2OE
2DIR
2A1
43
Same as above block
54
1B8
1CBA
1SBA
φB
29
28
15
φA
D
Q
φA
CK
φB
Q
φB
D
42 2B1
CK
2A8
2CAB
2SAB
24
33
Same as above block
30
27
26
φA
φB
φA
31
2B8
2CBA
2SBA
φB
4
2007-10-19
TC74VCX16646FT
Timing Chart
OE
DIR
SAB
SBA
CAB
CBA
A
B
A: Input
B: Output
: Don’t care
A: Output
B: Input
A: Z
B: Z
Z: High impedance
5
2007-10-19
TC74VCX16646FT
Absolute Maximum Ratings (Note 1)
Characteristics
Symbol
Rating
Unit
VCC
−0.5 to 4.6
V
VIN
−0.5 to 4.6
V
VI/O
−0.5 to VCC + 0.5
Power supply voltage
DC input voltage
(DIR, OE , CAB, CBA, SAB, SBA)
−0.5 to 4.6 (Note 2)
DC bus I/O voltage
V
(Note 3)
Input diode current
IIK
−50
Output diode current
IOK
±50
DC output current
IOUT
±50
mA
Power dissipation
PD
400
mW
ICC/IGND
±100
mA
Tstg
−65 to 150
°C
DC VCC/ground current per supply pin
Storage temperature
mA
(Note 4)
mA
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 2: OFF state
Note 3: High or low state. IOUT absolute maximum rating must be observed.
Note 4: VOUT < GND, VOUT > VCC
Operating Ranges (Note 1)
Characteristics
Symbol
Power supply voltage
Rating
1.8 to 3.6
VCC
Input voltage
1.2 to 3.6
(Note 2)
−0.3 to 3.6
VIN
(DIR, OE , CAB, CBA, SAB, SBA)
Unit
V
0 to 3.6
(Note 3)
0 to VCC
(Note 4)
±24
(Note 5)
±18
(Note 6)
±6
(Note 7)
Bus I/O voltage
VI/O
Output current
IOH/IOL
Operating temperature
Topr
−40 to 85
Input rise and fall time
dt/dv
0 to 10
V
V
mA
°C
(Note 8)
ns/V
Note 1: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 2: Data retention only
Note 3: OFF state
Note 4: High or low state
Note 5: VCC = 3.0 to 3.6 V
Note 6: VCC = 2.3 to 2.7 V
Note 7: VCC = 1.8 V
Note 8: VIN = 0.8 to 2.0 V, VCC = 3.0 V
6
2007-10-19
TC74VCX16646FT
Electrical Characteristics
DC Characteristics (Ta = −40 to 85°C, 2.7 V < VCC =< 3.6 V)
Characteristics
Input voltage
Min
Max
2.7 to 3.6
2.0
⎯
2.7 to 3.6
⎯
0.8
IOH = −100 μA
2.7 to 3.6
VCC
− 0.2
⎯
IOH = −12 mA
2.7
2.2
⎯
IOH = −18 mA
3.0
2.4
⎯
IOH = −24 mA
3.0
2.2
⎯
IOL = 100 μA
2.7 to 3.6
⎯
0.2
IOL = 12 mA
2.7
⎯
0.4
IOL = 18 mA
3.0
⎯
0.4
IOL = 24 mA
3.0
⎯
0.55
2.7 to 3.6
⎯
±5.0
μA
2.7 to 3.6
⎯
±10.0
μA
0
⎯
10.0
μA
VIN = VCC or GND
2.7 to 3.6
⎯
20.0
VCC <
= (VIN, VOUT) <
= 3.6 V
2.7 to 3.6
⎯
±20.0
VIH = VCC − 0.6 V
2.7 to 3.6
⎯
750
Min
Max
Symbol
Test Condition
H-level
VIH
⎯
L-level
VIL
⎯
H-level
VOH
VIN = VIH or VIL
Output voltage
L-level
VOL
Input leakage current
IIN
3-state output OFF state current
IOZ
Power-off leakage current
IOFF
Quiescent supply current
ICC
Increase in ICC per input
ΔICC
VIN = VIH or VIL
VIN = 0 to 3.6 V
VIN = VIH or VIL
VOUT = 0 to 3.6 V
VIN, VOUT = 0 to 3.6 V
VCC (V)
Unit
V
V
μA
DC Characteristics (Ta = −40 to 85°C, 2.3 V =< VCC =< 2.7 V)
Characteristics
Input voltage
Unit
Symbol
Test Condition
H-level
VIH
⎯
2.3 to 2.7
1.6
⎯
L-level
VIL
⎯
2.3 to 2.7
⎯
0.7
2.3 to 2.7
VCC
− 0.2
⎯
IOH = −6 mA
2.3
2.0
⎯
IOH = −12 mA
2.3
1.8
⎯
IOH = −18 mA
2.3
1.7
⎯
IOL = 100 μA
2.3 to 2.7
⎯
0.2
IOL = 12 mA
2.3
⎯
0.4
IOL = 18 mA
2.3
⎯
0.6
2.3 to 2.7
⎯
±5.0
μA
2.3 to 2.7
⎯
±10.0
μA
0
⎯
10.0
μA
IOH = −100 μA
H-level
VOH
VIN = VIH or VIL
Output voltage
L-level
VOL
Input leakage current
IIN
3-state output OFF state current
IOZ
Power-off leakage current
IOFF
Quiescent supply current
ICC
VIN = VIH or VIL
VIN = 0 to 3.6 V
VIN = VIH or VIL
VOUT = 0 to 3.6 V
VIN, VOUT = 0 to 3.6 V
VCC (V)
VIN = VCC or GND
2.3 to 2.7
⎯
20.0
VCC <
= (VIN, VOUT) <
= 3.6 V
2.3 to 2.7
⎯
±20.0
7
V
V
μA
2007-10-19
TC74VCX16646FT
DC Characteristics (Ta = −40 to 85°C, 1.8 V =< VCC < 2.3 V)
Characteristics
Min
Max
1.8 to 2.3
0.7 ×
VCC
⎯
1.8 to 2.3
⎯
0.2 ×
VCC
IOH = −100 μA
1.8
VCC
− 0.2
⎯
IOH = −6 mA
1.8
1.4
⎯
IOL = 100 μA
1.8
⎯
0.2
IOL = 6 mA
1.8
⎯
0.3
1.8
⎯
±5.0
μA
1.8
⎯
±10.0
μA
0
⎯
10.0
μA
VIN = VCC or GND
1.8
⎯
20.0
VCC <
= (VIN, VOUT) <
= 3.6 V
1.8
⎯
±20.0
Symbol
Test Condition
H-level
VIH
⎯
L-level
VIL
⎯
H-level
VOH
VCC (V)
Input voltage
VIN = VIH or VIL
Output voltage
VOL
VIN = VIH or VIL
Input leakage current
IIN
VIN = 0 to 3.6 V
3-state output OFF state current
IOZ
Power-off leakage current
IOFF
Quiescent supply current
ICC
L-level
VIN = VIH or VIL
VOUT = 0 to 3.6 V
VIN, VOUT = 0 to 3.6 V
8
Unit
V
V
μA
2007-10-19
TC74VCX16646FT
AC Characteristics (Ta = −40 to 85°C, input: tr = tf = 2.0 ns, CL = 30 pF, RL = 500 Ω) (Note 1)
Characteristics
Maximum clock frequency
Propagation delay time
(An, Bn-Bn, An)
Propagation delay time
(CAB, CBA-Bn, An)
Propagation delay time
(SAB, SBA-Bn, An)
Output enable time
( OE , DIR-An, Bn)
Output disable time
( OE , DIR-An, Bn)
Minimum pulse width
Minimum setup time
Minimum hold time
Output to output skew
Symbol
fmax
tpLH
tpHL
tpLH
tpHL
tpLH
tpHL
tpZL
tpZH
tpLZ
tpHZ
tw (H)
tw (L)
ts
th
Test Condition
Figure 1, Figure 3
Figure 1, Figure 2
Figure 1, Figure 3
Figure 1, Figure 2
Figure 1, Figure 4, Figure 5
Figure 1, Figure 4, Figure 5
Figure 1, Figure 3
Figure 1, Figure 3
Figure 1, Figure 3
tosLH
tosHL
Min
Max
1.8
100
⎯
2.5 ± 0.2
200
⎯
3.3 ± 0.3
250
⎯
1.8
1.5
7.0
2.5 ± 0.2
0.8
3.5
3.3 ± 0.3
0.6
2.9
1.8
1.5
8.8
2.5 ± 0.2
0.8
4.4
3.3 ± 0.3
0.6
3.2
1.8
1.5
8.8
2.5 ± 0.2
0.8
4.4
3.3 ± 0.3
0.6
3.5
1.8
1.5
9.8
2.5 ± 0.2
0.8
4.9
3.3 ± 0.3
0.6
3.8
1.8
1.5
7.6
2.5 ± 0.2
0.8
4.2
3.3 ± 0.3
0.6
3.7
VCC (V)
1.8
4.0
―
2.5 ± 0.2
1.5
⎯
3.3 ± 0.3
1.5
⎯
1.8
2.5
⎯
2.5 ± 0.2
1.5
⎯
3.3 ± 0.3
1.5
⎯
1.8
1.0
⎯
2.5 ± 0.2
1.0
⎯
3.3 ± 0.3
1.0
⎯
1.8
⎯
0.5
(Note 2) 2.5 ± 0.2
⎯
0.5
3.3 ± 0.3
⎯
0.5
Unit
MHz
ns
ns
ns
ns
ns
ns
ns
ns
ns
Note 1: For CL = 50 pF, add approximately 300 ps to the AC maximum specification.
Note 2: Parameter guaranteed by design.
(tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|)
9
2007-10-19
TC74VCX16646FT
Dynamic Switching Characteristics
(Ta = 25°C, input: tr = tf = 2.0 ns, CL = 30 pF, RL = 500 Ω)
Characteristics
Quiet output maximum
dynamic VOL
Quiet output minimum
dynamic VOL
Quiet output minimum
dynamic VOH
Note:
Symbol
VOLP
VOLV
VOHV
Test Condition
VCC (V)
Typ.
VIH = 1.8 V, VIL = 0 V
(Note)
1.8
0.25
VIH = 2.5 V, VIL = 0 V
(Note)
2.5
0.6
VIH = 3.3 V, VIL = 0 V
(Note)
3.3
0.8
VIH = 1.8 V, VIL = 0 V
(Note)
1.8
−0.25
VIH = 2.5 V, VIL = 0 V
(Note)
2.5
−0.6
VIH = 3.3 V, VIL = 0 V
(Note)
3.3
−0.8
VIH = 1.8 V, VIL = 0 V
(Note)
1.8
1.5
VIH = 2.5 V, VIL = 0 V
(Note)
2.5
1.9
VIH = 3.3 V, VIL = 0 V
(Note)
3.3
2.2
Unit
V
V
V
Parameter guaranteed by design.
Capacitive Characteristics (Ta = 25°C)
Characteristics
Input capacitance
Symbol
CIN
Bus I/O capacitance
CI/O
Power dissipation capacitance
CPD
Note:
Test Condition
(DIR, OE , CAB, CBA, SAB, SBA)
⎯
fIN = 10 MHz
Typ.
Unit
6
pF
1.8, 2.5, 3.3
7
pF
(Note) 1.8, 2.5, 3.3
20
pF
VCC (V)
1.8, 2.5, 3.3
CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating
current consumption without load.
Average operating current can be obtained by the equation:
ICC (opr) = CPD･VCC･fIN + ICC/16 (per bit)
10
2007-10-19
TC74VCX16646FT
AC Test Circuit
6.0 V or VCC × 2
Open
GND
RL
Switch
Switch
tpLH, tpHL
Open
RL
Measure
CL
Output
Parameter
tpLZ, tpZL
CL = 30 pF
RL = 500 Ω
6.0 V
VCC × 2
tpHZ, tpZH
@VCC = 3.3 ± 0.3 V
@VCC = 2.5 ± 0.2 V
@VCC = 1.8 V
GND
Figure 1
AC Waveform
tf 2.0 ns
tr 2.0 ns
Input
(An, Bn,
SAB, SBA)
90%
VM
VIH
10%
GND
VOH
Output
(Bn, An)
VM
VOL
tpHL
tpLH
Figure 2 tpLH, tpHL
tr 2.0 ns
Input
(CAB, CBA)
10%
tf 2.0 ns
VIH
90%
VM
GND
tw (H)
tw (L)
VIH
Input
(An, Bn)
VM
ts (H)
th (H)
ts (L)
th (L)
GND
VOH
Output
(Bn, An)
VM
tpHL
tpLH
VOL
Figure 3 tpLH, tpHL, tw, ts, th
11
2007-10-19
TC74VCX16646FT
tr 2.0 ns
tf 2.0 ns
90%
VM
Output Disable
( OE )
2.7 V
10%
tpLZ
GND
tpZL
3.0 V or VCC
Output (An, Bn)
Low to Off to Low
VM
tpHZ
VX
VOL
tpZH
VOH
VY
Output (An, Bn)
High to Off to High
VM
GND
Outputs
enabled
Outputs
disabled
Outputs
enabled
Figure 4 tpLZ, tpH, tpZ, tpZH
tf 2.0 ns
tr 2.0 ns
VIN
90%
Input
(DIR)
10%
VM
GND
3.0 V or VCC
Output
(An)
VM
VX
tpZL
Output
(An)
VOL
tpLZ
VOH
VY
VM
tpZH
GND
tpHZ
tpLZ
Output
(Bn)
3.0 V or VCC
VM
VX
Output
(Bn)
tpHZ
VOL
tpZL
VOH
VY
VM
GND
tpZH
Figure 5 tpLZ, tpH, tpZ, tpZH
Symbol
VCC
3.3 ± 0.3 V
2.5 ± 0.2 V
1.8 V
VIH
2.7 V
VCC
VCC
VM
1.5 V
VCC/2
VCC/2
VX
VOL + 0.3 V
VOL + 0.15 V
VOL + 0.15 V
VY
VOH − 0.3 V
VOH − 0.15 V
VOH − 0.15 V
12
2007-10-19
TC74VCX16646FT
Package Dimensions
Weight: 0.25 g (typ.)
13
2007-10-19
TC74VCX16646FT
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
14
2007-10-19