TCP009A SANTA ANA DIVISION DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW This Thyristor Surge Suppressor device has been especially designed to protect against overvoltage. Two diodes clamp positive overloads while negative surges are suppressed by two protection thyristors. Particular attention has been given to the internal wire bonding. The ”4point” configuration ensures a reliable protection, eliminating overvoltages introduced by the parasitic inductances of the wiring (Ldi/dt), especially for very fast transient overvoltages. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com !"DUAL ASYMETRICAL TRANSIENT SUPPRESSOR !"PEAK PULSE CURRENT: IPP=40A,10/1000µs !"HOLDING CURRENT:50mA min. !"BREAKDOWN VOLTAGE: TCP009A: 9 V LOW DYNAMIC CHARACTERISTICS !"STAND CCITT K20 AND LSSGR W W W . Microsemi .COM KEY FEATURES DESCRIPTION APPLICATIONS/BENEFITS APPLICATIONS/BENEFIT S COMPLIES WITH THE FOLLOWING STANDARDS: CCITT K20: µs µs µs µs µs µs µs µs µs µs 1 kV 38 A 2 kV 50 A 1.5 kV 40 A 1 Kv 38 A 2.5 kv 125 A (*) 02/10 µs 02/10 µs 10/1000 µs 10/1000 µs 2.5 kv 125 A (*) 1 kV 40 A (*) 10/700 5/310 10/700 5/310 1.2/50 1/20 0.5/700 0.2/310 02/10 02/10 VDE 0433: VDE 0878: I3124: FCC part 68: BELLCORE TR-NWT-001089: !" (*) with series resistors or PTC. UL94V-0 TCPxx packages comply with requirements of UL94V-0 TCP009A Copyright 2000 MSC1635.PDF 2000-12-01 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 1 TCP009A DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES SANTA ANA DIVISION PRODUCT PREVIEW ABSOLUTE MAXIMUM RATINGS (Tamb = 25°C) IPP Parameter Peak pulse current (see note 1) ITSM Non repetitive surge peak on-state current F = 50 Hz ITSM F=50Hz, 60x1s, 2mn between pulse Tstg Storage temperature range Maximum junction temperature Tj 10/1000 µs 5/310 µs 2/10 µs t = 300 ms t=1s t=5s tr = 10 µs tr = 5µs tr = 2µs Unit 40 50 125 10 50 1 1 A A A -55 to + 150 150 °C 260 °C Maximum lead temperature for soldering during 10s TL waveform: Note 1 : Pulse waveform : Note 1: Pulse wave 10/1000 µs 5/310 µs 2/10 µs Value W W W . Microsemi .COM Symbol tp = 1000 µs tp = 310 µs tp = 10 µs THERMAL RESISTANCES Symbol Parameter Value Unit Rth (j-a) Junction to ambient 170 °C/W Symbol VRM ELECTRICAL CHARACTERISTICS (Tamb= 25°C) Parameter Stand-off voltage IRM Leakage current at stand-offvoltage VBR Breakdown voltage VBO Breakover voltage Holding current VF Forward voltage drop VFP Peak forward voltage IBO Breakover current IPP C Peak pulse current αT Temperature coefficient Copyright 2000 MSC1635.PDF 2000-12-01 ELECTRICALS IH Capacitance Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 2 TCP009A DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES SANTA ANA DIVISION PRODUCT PREVIEW W W W . Microsemi .COM 1 - PARAMETERS RELATED TO DIODE LINE / GND Symbol VF Test Conditions IF=1A Min Typ Max Unit 2 V tp=100 µs 2 – PARAMETERS RELATED TO PROTECTION THYRISTOR Types IRM @ VRM IR max TCP009A µA 10 V 8 mA 1 @ VBR VBO min max min V 9 V 12 V 50 IH C max min max mA 400 mA 50 pF 30 IBO ELECTRICALS Copyright 2000 MSC1635.PDF 2000-12-01 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 3 TCP009A SANTA ANA DIVISION DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW W W W . Microsemi .COM NOTES Copyright 2000 MSC1635.PDF 2000-12-01 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 4 TCP009E SANTA ANA DIVISION TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW Transient suppressor TCP009 is dedicated to XDSL, T1, Ethernet, and data lines protection. Important features - very low breakover voltage combined with low capacitance. May be used as a triple or a single bidirectional suppressor – see schematic diagram. This product provides: - low capacitance, allowing high speed signal transmissions with low losses - low dynamic breakover voltage, protecting submicron microelectronic circuitry - Compliance with BELLCORE 1089-GR requirements for intrabuilding lightning and power fault surges. !"BIDIRECTIONAL TRIPLE CROWBAR PROTECTION !"PEAK PULSE CURRENT: IPP = 30 A, 10/1000 µs !"BREAKDOWN VOLTAGE: 9V • AVAILABLE IN SO8 PACKAGES • LOW DYNAMIC BREAKOVER VOLTAGE: 15 V @ 2/10 µs • Low Capacitance: 30 pF W W W . Microsemi .COM KEY FEATURES DESCRIPTION APPLICATIONS/BENEFITS APPLICATIONS/BENEFIT S IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com !" COMPLIES WITH THE FOLLOWING STANDARDS: 10/700 µs 5/310 µs 10/700 µs 5/310 µs 1.2/50 µs µs 1/20 0.5/700 µs 0.2/310 µs CCITT K17 - K20 VDE 0433 VDE 0878 CNET UL94V-0 1.5 38 2 50 1.5 40 1.5 38 KV A KV A KV A KV A TCPxx packages comply with requirements of UL94V-0 TCP009E Copyright 2000 MSC1635.PDF 2000-12-04 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 1 TCP009E TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES SANTA ANA DIVISION PRODUCT PREVIEW W W W . Microsemi .COM ELECTRICAL PARAMETERS @ 25°C (unless otherwise specified) Symbol IPP ITSM Tstg Tj TL Parameter Peak pulse current (see note 1) Value Unit 30 40 90 A 8 3.5 A -55 to + 150 °C 10/1000 µs 5/320 µs 2/10 µs tp = 10 ms Non repetitive surge peak on-state t=1s current (F = 50 Hz). Storage temperature range Maximum junction temperature Maximum lead temperature for soldering during 10s 150 260 °C Value Unit 170 °C/W Note 1 : Pulse waveform : 10/1000µs tr=10µs tp=1000µs 5/310µs tr=5µs tp=310µs 2/10µs tr=2µs tp=10µs THERMAL RESISTANCES Symbol Rth (j-a) Parameter Junction to ambient SO 8 ELECTRICALS Copyright 2000 MSC1635.PDF 2000-12-04 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 2 TCP009E TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES SANTA ANA DIVISION PRODUCT PREVIEW Parameter Stand-off voltage VRM IRM Leakage current VBR Breakdown voltage VBO Breakover voltage IH Holding current IBO Breakover current IPP Peak pulse current VF C Forward Voltage Drop Types Capacitance IRM @ VRM IR @ max VBR VBO min max VBO dyn typ IBO min note 1 TCP009E W W W . Microsemi .COM ELECTRICAL CHARACTERISTICS (Tamb= 25°C) Symbol µA 10 V 5 mA 1 V 9 V 12 max IH CP min max mA 50 pF 30 note 1 V 15 mA 50 mA 400 Note 1 : Surge test according to CCITT 1.5kV,10/700 ms between Tip or Ring and ground. ELECTRICALS Copyright 2000 MSC1635.PDF 2000-12-04 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 3 TCP009E SANTA ANA DIVISION TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW W W W . Microsemi .COM NOTES Copyright 2000 MSC1635.PDF 2000-12-04 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 4