Car audio power amplifiers moving to the green zone Linear and digital high-efficiency audio power amplifiers with start-stop and hybrid-vehicle compatibility ST is world leader in automotive audio power amplifiers, and offers solutions for each market segment. ST is also committed to environment protection and was the first company to design audio amplifiers with the specific target of allowing car makers to decrease exhaust, fuel consumption and vehicle weight. Every new power amplifier from ST is now compatible with the most recent technologies for green vehicles, such as start-stop and hybrid technologies, and embeds advanced high-efficiency solutions. Key features Digital families • Compatibility with start-stop and • Class D high efficiency with hybrid-vehicle battery profiles: the engine stops and restarts without any interruption or noise on the audio • Full protection against any misconnection • Full digital diagnostics • High noise-injection immunity • Automotive-grade EMC performances • MOSFET output power • Superior audio performances Analog family • Class SB high efficiency with up to 25% less power dissipation compared to class AB (actual measurements) optimized BOM • Class SBi high efficiency with up to 50% less power dissipation compared to class AB Key benefits • Low power dissipation with high output power • Smaller heatsink allowing smaller and lighter applications • Contribution to emission reductions and environment protection • Lower application cost compared to equivalent solutions (especially for class D) • Compatibility with existing products, so direct replacement is possible with minor redesign www.st.com/car-radio New audio power green wave TARGETED APPLICATIONS • Head units 1 LV family for start-stop and hybrid vehicles with high efficiency ST on the market • Boosters • Automotive sound systems 1ST Decrease TDA780x family digital audio with very high efficiency emissions fuel consumption weight on the market Quantum leap in class D FDA family digital audio with extremely high efficiency high performances and component saving cost Full product support Demonstration boards, technical documentation and relevant software are available for all automotive power amplifiers. device summary Part number Description TDA7391LV 35 W single bridge power amplifier TDA7569BLV 4 x 50 W high efficiency, class SB power amplifier with full I2C diagnostics TDA7569BDLV 4 x 50 W high efficiency, class SB differential input power amplifier with full I2C diagnostics TDA75610LV 4 x 45 W high efficiency, class SB power amplifier with full I2C diagnostics TDA75610DLV 4 x 45 W high efficiency, class SB differential input power amplifier with full I2C diagnostics TDA75613LV 4 x 45 W high efficiency, class SB power amplifier with full I2C diagnostics and SSR(1) TDA7577LV 2 x 50 W high efficiency, class SB dual bridge power amplifier with with full I2C diagnostics TDA7802 High efficiency, class SB-I(2) digital input quad power amplifier with built-in diagnostics features FDA4100LV 4 x 135 W / 2 x 270 W PWM digital input power amplifier with built-in diagnostics and step-up driver FDA450LV 4 x 50 W PWM digital input power amplifier with built-in diagnostics features FDA2100LV 2 x 180W/1 x 300W PWM digital-input power amplifier with built-in diagnostics and step-up driver STPA001 4 x 50 W MOSFET quad bridge power amplifier STPA002 4 x 52 W MOSFET quad bridge power amplifier with high side driver Notes: (1) SSR is short for speaker safety routine, (2) Class SB-I is short for class SB improved © STMicroelectronics - September 2013 - Printed in United Kingdom - All rights reserved The STMicroelectronics corporate logo is a registered trademark of the STMicroelectronics group of companies Thunderbolt is a trademark of Intel Corporation in the U.S. and/or other countries. All other names are the property of their respective owners Order code: FLAUTOMOT0913 For more information on ST products and solutions, visit www.st.com