TI TL34072D

TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
D
D
D
D
D
D
Wide Gain-Bandwidth Product . . . 4.5 MHz
High Slew Rate . . . 13 V/µs
Fast Settling Time . . . 1.1 µs to 0.1%
Wide-Range Single-Supply Operation
4 V to 44 V
Wide Input Common-Mode Range Includes
Ground (VCC –)
Low Total Harmonic Distortion . . . 0.02%
D
D
D
D
D
D
Low Input Offset Voltage . . . 3 mV Max
(A Suffix)
Large Output Voltage Swing
– 14.7 V to 14 V (With ± 15-V Supplies)
Large Capacitance Drive Capability
10,000 pF
Excellent Phase Margin . . . 60°
Excellent Gain Margin . . . 12 dB
Output Short-Circuit Protection
D OR P PACKAGE
(SINGLE, TOP VIEW)
OFSET N1
IN –
IN +
VCC – /GND
1
8
2
7
3
6
4
5
D OR P PACKAGE
(DUAL, TOP VIEW)
1OUT
1IN –
1IN +
VCC – /GND
NC
VCC +
OUT
OFSET N2
DW PACKAGE
(QUAD, TOP VIEW)
1OUT
1IN –
1IN +
VCC +
2IN +
2IN –
2OUT
NC
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
1
8
2
7
3
6
4
5
VCC +
2OUT
2IN –
2IN +
N PACKAGE
(QUAD, TOP VIEW)
4OUT
4IN –
4IN +
VCC – /GND
3IN +
3IN –
3OUT
NC
1OUT
1IN –
1IN +
VCC +
2IN +
2IN –
2OUT
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN –
4IN +
VCC – /GND
3IN +
3IN –
3OUT
NC – No internal connection
AVAILABLE OPTIONS
PACKAGE
TA
COMPLEXITY
0°C
to
70°C
PLASTIC DIP
SMALL OUTLINE
STANDARD
GRADE
PRIME
GRADE
STANDARD
GRADE
PRIME
GRADE
Single
Dual
Quad
TL34071P
TL34072P
TL34074N
TL34071AP
TL34072AP
TL34074AN
TL34071D
TL34072D
TL34074DW
TL34071AD
TL34072AD
TL34074ADW
– 40°C
40 C
to
105°C
Single
g
Dual
Quad
TL33071P
TL33072P
TL33074N
TL33071AP
TL33072AP
TL33074AN
TL33071D
TL33072D
TL33074DW
TL33071AD
TL33072AD
TL33074ADW
– 55°C
55 C
to
125°C
Single
g
Dual
Quad
TL35071P
TL35072P
TL35074N
TL35071AP
TL35072AP
TL35074AN
TL35071D
TL35072D
TL35074DW
TL35071AD
TL35072AD
TL35074ADW
D and DW packages are available taped and reeled. Add R suffix to device type (e.g., TL34071ADR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  1996, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
description
Quality, low cost, bipolar fabrication with innovative design concepts are employed for the TL33071/2/4,
TL34071/2/4, and TL35071/2/4 series of monolithic operational amplifiers. This series of operational amplifiers
offers 4.5 MHz of gain bandwidth product, 13 V/µs slew rate, and fast settling time without the use of JFET device
technology. Although this series can be operated from split supplies, it is particularly suited for single-supply
operation since the common-mode input voltage range includes ground potential (VCC –). With a Darlington
transistor input stage, this series exhibits high input resistance, low input offset voltage, and high gain. The
all-npn output stage, characterized by no dead-band crossover distortion and large output voltage swing,
provides high-capacitance drive capability, excellent phase and gain margins, low open-loop high-frequency
output impedance, and symmetrical source/sink ac frequency response.
The TL34071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are specified
over the commercial (0°C to 70°C) temperature range. The TL33071/2/4 devices are available in standard or
prime performance (A-suffix) grades and are specified over industrial/vehicular (– 40°C to 105°C) temperature
range. The TL35071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are
specified over the military (– 55°C to 125°C) temperature range. These low-cost amplifiers are available in
single, dual, and quad configurations and are pin compatible with the MC33071/2/4, MC34071/2/4, and
MC35071/2/4 series of amplifiers. Packaging options include standard plastic DIP and SO packages.
symbol
Single
Dual and Quad
(per amplifier)
OFFSET N1
IN +
IN –
+
–
IN +
+
IN –
–
OUT
OFFSET N2
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
OUT
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V
Supply voltage, VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 22 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 44 V
Input voltage, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC ±
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 1 mA
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 80 mA
Total current into VCC + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA
Total current out of VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA
Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: TL3307x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 105°C
TL3407x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
TL3507x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds: D, DW, N, or P package . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC –.
2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows if input is brought below
VCC – – 0.3 V.
3. The output can be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
D
DW
N
P
TA ≤ 25°C
POWER RATING
725 mW
1025 mW
1150 mW
1000 mW
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 105°C
POWER RATING
TA = 125°C
POWER RATING
5.8 mW/°C
8.2 mW/°C
9.2 mW/°C
8.0 mW/°C
464 mW
656 mW
736 mW
640 mW
261 mW
369 mW
414 mW
360 mW
145 mW
205 mW
230 mW
200 mW
recommended operating conditions
TL3307x
Supply voltage, VCC ±
Common mode input voltage,
voltage VIC
Common-mode
VCC = 5 V
VCC ± = ± 15 V
Operating free-air temperature, TA
POST OFFICE BOX 655303
TL3407x
TL3507x
MIN
MAX
MIN
MAX
MIN
MAX
±2
± 22
±2
± 22
±2
± 22
0
2.7
0
2.9
0
2.7
– 15
12.7
– 15
12.9
– 15
12.7
– 40
105
0
70
– 55
125
• DALLAS, TEXAS 75265
UNIT
V
V
°C
3
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
VIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
VCC = 5 V
25°C
0.5
3
1.5
5
25°C
0.5
3
1.0
5
VCC = ± 15 V
VIC = 0,
VO = 0,
0
RS = 50 Ω
VCC = ± 15 V
VCC = ± 15 V
VCC = 5 V
IIB
Input bias current
VCC = ± 15 V
VICR
VOH
VOL
Common-mode input
voltage range
Hi h l
l output
t t voltage
lt
High-level
L
l
l output
t t voltage
lt
Low-level
MIN
5
Full range
10
25°C
7
Full range
25°C
– 0.8
100
7
– 0.7
Full range
100
250
–2
– 0.8
– 2.3
25°C
– 1.5
– 0.7
– 1.8
25°C
Full range
– 15
to
12.8
– 15
to
12.8
– 1.5
3.7
4
3.7
4
RL = 10 kΩ
25°C
13.6
14
13.6
14
RL = 2 kΩ
Full range
13.4
V
13.4
VCC + = 5 V, VCC – = 0,
RL = 2 kΩ
25°C
0.1
0.3
0.1
0.3
RL = 10 kΩ
25°C
– 14.7
– 14.3
– 14.7
– 14.3
RL = 2 kΩ
Full range
IOS
Short circuit output current
Short-circuit
CMRR
Common-mode
rejection ratio
VIC = VICRmin,,
RS = 50 Ω
kSVR
Supply-voltage
y
g rejection
j
ratio (∆VCC ± /∆VIO)
VCC ± = ± 13.5 V
to ± 16.5 V,
RS = 100 Ω
25
Source: VID = 1 V, VO = 0
No Load
100
– 13.5
25
100
V/mV
20
– 30
– 10
– 30
20
30
20
30
25°C
80
97
70
97
dB
25°C
80
97
70
97
dB
25°C
3.5
Full range
VCC + = 5 V, VCC – = 0,
VO = 0,
No Load
V
– 10
25°C
Sink: VID = – 1 V, VO = 0
VO = 0
0,
– 13.5
Full range
µA
V
25°C
VO = ± 10 V
V, RL = 2 kΩ
nA
– 1.8
– 15
to
13.2
50
mV
–2
– 2.3
– 15
to
13.2
25°C
UNIT
µV/°C
10
250
Full range
MAX
7
VCC + = 5 V, VCC – = 0,
RL = 2 kΩ
Large-signal
g
g
differential
voltage amplification
Supply
y current
(per channel)
MIN
Full range
RS = 50 Ω
AVD
ICC
TL3x07x
TYP‡
TA†
Input offset voltage
αVIO
TL3x07xA
TYP‡
MAX
TEST CONDITIONS
25°C
4.5
3.5
4.7
3.4
4.4
mA
4.5
4.7
3.4
4.4
mA
Full range
4.6
4.6
† Full range is 0°C to 70°C for the TL3407x devices, and – 40°C to 105°C for the TL3307x devices, and – 55°C to 125°C for the TL3507x devices.
‡ All typical values are at TA = 25°C.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
operating characteristics, VCC± = ±15 V, TA = 25°C
PARAMETER
TEST CONDITIONS
SR +
Positive slew rate
SR –
Negative slew rate
VI = – 10 V to 10 V,,
RL = 2 kΩ
ts
Settling time
AVD = – 1
1, 10
10-V
V step
Vn
In
Equivalent input noise voltage
f = 1 kHz,
Equivalent input noise current
THD
GBW
AV = 1
AV = – 1
TL3x07xA
MIN
TYP
8
10
TL3x07x
MAX
MIN
TYP
8
10
MAX
UNIT
V/µs
13
13
To 0.1%
1.1
1.1
To 0.01%
2.2
2.2
32
32
nV/√Hz
f = 1 kHz
0.22
0.22
pA/√Hz
Total harmonic distortion
VO = 2 V to 20 V, RL = 2 kΩ,
AVD = 10,
f = 10 kHz
0 02
0.02
0 02
0.02
%
Gain-bandwidth product
f =100 kHz
4.5
MHz
BW
Power bandwidth
RL = 2 kΩ,,
AVD = 1,
VO(PP) = 20 V,,
THD = 5.0%
200
200
kHz
φm
Phase margin
RL = 2 kΩ,
CL = 0
60°
60°
RL = 2 kΩ,
CL = 300 pF
40°
40°
RL = 2 kΩ,
CL = 0
12
12
RL = 2 kΩ,
CL = 300 pF
4
4
Gain margin
RS = 100 Ω
3.5
4.5
3.5
µs
dB
ri
Differential input resistance
150
MΩ
Input capacitance
VIC = 0
VIC = 0
150
Ci
2.5
2.5
pF
Channel separation
f = 10 kHZ
120
120
dB
Open-loop output impedance
f = 1 MHZ
30
30
Ω
zo
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
PACKAGE OPTION ADDENDUM
www.ti.com
11-Mar-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TL33071AP
NRND
PDIP
P
8
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
TL33071D
NRND
SOIC
D
8
Pb-Free
(RoHS)
CU NIPDAU
Level-2-260C-1YEAR/
Level-1-220C-UNLIM
TL33071P
NRND
PDIP
P
8
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
Lead/Ball Finish
MSL Peak Temp (3)
TL33072AD
OBSOLETE
SOIC
D
8
None
Call TI
Call TI
TL33072ADR
OBSOLETE
SOIC
D
8
None
Call TI
Call TI
TL33072AP
OBSOLETE
PDIP
P
8
None
Call TI
Call TI
TL33072DR
OBSOLETE
SOIC
D
8
None
Call TI
Call TI
TL33072P
OBSOLETE
PDIP
P
8
None
Call TI
Call TI
TL33074ADW
OBSOLETE
SOIC
DW
16
None
Call TI
Call TI
TL33074ADWR
OBSOLETE
SOIC
DW
16
None
Call TI
Call TI
TL33074AN
NRND
PDIP
N
14
None
Call TI
Call TI
TL33074DW
NRND
SOIC
DW
16
None
Call TI
Call TI
TL33074DWR
OBSOLETE
SOIC
DW
16
None
Call TI
Call TI
TL33074N
NRND
PDIP
N
14
None
Call TI
Call TI
TL34071AP
OBSOLETE
PDIP
P
8
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
TL34071D
OBSOLETE
SOIC
D
8
None
Call TI
Call TI
TL34071DR
OBSOLETE
SOIC
D
8
None
Call TI
Call TI
TL34071P
OBSOLETE
PDIP
P
8
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
TL34072AD
OBSOLETE
SOIC
D
8
None
Call TI
Call TI
TL34072ADR
OBSOLETE
SOIC
D
8
None
Call TI
Call TI
TL34072AP
OBSOLETE
PDIP
P
8
None
Call TI
Call TI
TL34072D
OBSOLETE
SOIC
D
8
None
Call TI
Call TI
TL34072DR
OBSOLETE
SOIC
D
8
None
Call TI
Call TI
TL34072P
OBSOLETE
PDIP
P
8
None
Call TI
Call TI
TL34074ADW
OBSOLETE
SOIC
DW
16
None
Call TI
Call TI
TL34074ADWR
OBSOLETE
SOIC
DW
16
None
Call TI
Call TI
TL34074AN
OBSOLETE
PDIP
N
14
Pb-Free
(RoHS)
CU NIPDAU
TL34074DW
OBSOLETE
SOIC
DW
16
None
Call TI
Call TI
TL34074DWR
OBSOLETE
SOIC
DW
16
None
Call TI
Call TI
TL34074N
OBSOLETE
PDIP
N
14
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
TL35072P
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
50
None
Call TI
Call TI
None
Call TI
Call TI
Call TI
TL35072PE4
ACTIVE
PDIP
P
8
TL35074ADW
OBSOLETE
SOIC
DW
16
TL35074ADWR
OBSOLETE
SOIC
DW
16
None
Call TI
TL35074AN
OBSOLETE
PDIP
N
14
Pb-Free
(RoHS)
CU NIPDAU
TL35074DW
OBSOLETE
SOIC
DW
16
None
Call TI
Addendum-Page 1
Level-NC-NC-NC
Level-NC-NC-NC
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
11-Mar-2005
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TL35074DWR
OBSOLETE
SOIC
DW
16
None
Call TI
TL35074N
OBSOLETE
PDIP
N
14
Pb-Free
(RoHS)
CU NIPDAU
Lead/Ball Finish
MSL Peak Temp (3)
Call TI
Level-NC-NC-NC
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2005, Texas Instruments Incorporated