TRUMPower 55 WATT MEDICAL POWER ADAPTERS TMP55 SERIES D E S C R IP T IO N (MDD) The TMP55 series consists of 15 standard desktop AC/DC switching power adapters with 40 to 55 watts of continuous output power. The units are enclosed in a 94V-1 rated plastic case with an IEC 320 inlet to mate with interchangeable cord for world-wide use. An on/off switch can be added at customer’s request. All models meet CISPR 11 and FCC class B emission limits, and are designed for medical applications. F E AT U R E S ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ 1 5 s ta n d a r d d e s k t o p m o d e l s S i n g l e , d u a l o r t r i p l e o u t p u ts Optional output connectors Optional on/off switch 100% burn-in W i d e i n p u t r a n g e 8 5 t o 2 6 4 VAC Input surge current protection O v e r v o l ta g e p r o t e c t i o n Overcurrent protection S a f e t y Sta n d a r d A p p r o va l s ： UL 2601-1 CSA C22.2 No. 601.1 I N P U T S P E C I F I C AT I O N S I n p u t v o l ta g e ： 8 5 t o 2 6 4 VA C Input frequency： 47 to 63 Hz Input current： 1 . 5 0 A ( r m s ) f o r 11 5 VA C 0 . 9 0 A ( r m s ) f o r 2 3 0 VA C L e a k a g e c u r r e n t ： 9 0 µ A m a x . @ 11 5 VA C , 6 0 H z 1 5 0 µ A m a x . @ 2 3 0 VA C , 5 0 H z TÜV EN60601-1 GENERAL SPECIFICATIONS Switching frequency： 40KHz ±5KHz OUTPUT SPECIFICATIONS Output voltage/current： See rating chart Total output power： 55 watts maximum Ripple and noise： 1% peak to peak maximum Overvoltage protection： Provided on output #1 only; set at 112-132% of its nominal output voltage Efficiency： 70% minimum on single output models with Vo ≥10V, 65% minimum on the others 10 msec minimum at 110VAC ±0.5% maximum at full load Hold-up time： Line regulation： Inrush current： Overcurrent protection： All outputs protected to short circuit conditions Temperature coefficient： All outputs ±0.04%/ºC maximum Transient response： Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500µs after a 25% step load change 15 amps @ 115VAC, or 30 amps @230VAC, at 25ºC cold start Withstand voltage： 4000VAC from input to output 1500VAC from input to ground 500VAC from output to ground MTBF： 450,000 hours minimum at full load at 25ºC ambient, calculated per MIL-HDBK-217F EMC performance (EN60601-1-2: 2001) E N 5 5 0 11 : Class B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion, Class A EN61000-3-3: Line flicker EN61000-4-2: ESD, ±8KV air and ±6KV contact EN61000-4-3: Radiated immunity, 3V/m for 80~2500MHz E N V I R O N M E N TA L S P E C I F I C AT I O N S EN61000-4-4: Fast transient/burst, ±2KV O p e r a t i n g t e m p e r a t u r e： 0 º C t o + 7 0 º C Storage temperature： -40ºC to +85ºC 5% to 95% Relative humidity： non-condensing Derating： Derate from 100% at +50ºC linearly to 50% at +70ºC EN61000-4-5: Surge, ±1KV diff, ±2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 3A/m E N 6 1 0 0 0 - 4 - 11 : Voltage dips, 30% reduction for 500ms, 60% reduction for 100ms and >95% reduction for 10ms Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com MEDICAL GRADE TMP55 SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Product No. TMP55-S05 TMP55-S06 TMP55-S09 TMP55-S12 TMP55-S15 TMP55-S19 TMP55-S24 TMP55-S30 TMP55-S36 TMP55-S48 TMP55-D23 TMP55-D24 TMP55-D25 TMP55-T31 TMP55-T32 Notes: (1) (2) Vnom. 5-6V 6-8V 9-11V 11-13V 13-17V 17-21V 21-27V 27-33V 33-39V 48V +5V +5V +5V +5V +5V Output #1 Imin. Imax. 0A 8.0A 0A 7.5A 0A 5.0A 0A 4.6A 0A 3.7A 0A 3.1A 0A 2.3A 0A 1.9A 0A 1.6A 0A 1.2A 1A 5.0A 1A 5.0A 1A 5.0A 1A 5.0A 1A 5.0A Tol. 5% 5% 5% 5% 3% 3% 3% 3% 3% 3% 5% 5% 5% 5% 5% Vnom. +12V +15V +24V +12V +15V Output #2 Imin. Imax. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) 0.5A 3.0A 0.4A 2.5A 0.3A 2.0A 0.5A 3.0A 0.4A 2.5A Output #3 Vnom. Imin. Imax. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) -12V 0.1A 0.5A -15V 0.1A 0.5A Tol. 5% 5% 5% 5% 5% Maximum Output Power 40W 45W 50W 55W 55W 55W 55W 55W 55W 55W 45W 45W 45W 45W 45W Tol. 10% 10% The output voltage of a single output model, except TMP55-S48, can be adjusted by user in the stated range, or set by factory to a wanted value in the range at the request of a user when ordering. The output voltages of a multiple output model may go outside of the stated tolerance when an output load current is out of stated limits. All models may be operated at no-load without damage. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions show in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 700 grams approx. 4. Standard output connector is a 5-pin at 180º male DIN plug. For other output connector options, please consult TRUMPower. 5. To order a model with on/off switch, add suffix “S”, e.g. TMP55-S12-S PIN CHART PIN 1 2 3 4 5 DC RETURN DC RETURN DC OUTPUT DC RETURN DC OUTPUT COMMOM RETURN COMMOM RETURN OUTPUT #1 COMMOM RETURN OUTPUT #2 COMMOM RETURN COMMOM RETURN OUTPUT #1 OUTPUT #3 OUTPUT #2 Product No. TMP55-S05 TMP55-S12 TMP55-S24 TMP55-S48 TMP55-S06 TMP55-S15 TMP55-S30 TMP55-S09 TMP55-S19 TMP55-S36 TMP55-D23 TMP55-D24 TMP55-D25 TMP55-T31 TMP55-T32 Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com