TRUMPower D E SCR IPTION The TMP90 is a series of AC/DC desktop power adapters with 60 to 90 watts of continuous output power. They are enclosed in a 94V-1 rated case with an IEC 320/C14 or C18 inlet for medical and ITE applications. All models meet EN55011, EN55022 and FCC class B emission limits, and are designed for medical applications. 90 WATTS MEDICAL POWER ADAPTERS TMP90 SERIES ( LV D ) RoHS F EATU R E S ‧ Low safety ground leakage current ‧ ‧ ‧ ‧ ‧ ‧ ‧ IEC320/C14 (Class I) or C18 (Class II) Inlet 9 0 t o 2 6 4 VA C w i d e i n p u t r a n g e Optional output connectors O v e r v o l ta g e & o v e r c u r r e n t p r o t e c t i o n s 0.98 PFC 100% burn-in C o m p l i a n t w i t h C E C a n d E n e r g y S ta r e f f i c i e n c y l e v e l I V r e q u i r e m e n ts ( e x c e p t ≤ 1 2 V o u t p u t m o d e l s ) ‧ No load power consumption less than 0.5W ‧ Av e r a g e a c t i v e e f f i c i e n c y ≥ 8 5 % ‧ C o m p l i a n t w i t h R o H S r e q u i r e m e n ts Saf et y Sta n da rd A ppr o va ls： UL 60601-1 CSA C22.2 No. 601.1 TÜV EN60601-1 IN PUT S PE C IF ICAT ION S I n p u t v o l ta g e : Input frequency : Input current : Earth leakage current : 90 to 264VAC 47 to 63Hz 1.20A (rms) for 115VAC 0.60A (rms) for 230VAC 90µA max. @ 115VAC, 60Hz 150µA max. @ 230VAC, 50Hz OUTPUT SPECIFICATIONS Output voltage/current： See rating chart Total output power： See rating chart Ripple and noise： 2% peak to peak maximum Over voltage protection： Set at 112-140% of its nominal output voltage Protected to short circuit conditions Over current protection： Temperature coefficient： ±0.04%/ºC maximum Transient response： Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500µs after a 25% step load change E N V IR O N M ENTA L SP E C IF ICATI O N S Operating temperature： Storage temperature： Relative humidity： Derating： 0 ºC t o + 6 0 ºC - 4 0 ºC t o + 8 5 ºC 5% to 95% non-condensing Derate from 100% at +40ºC linearly to 50% at +60ºC GENERAL SPECIFICATIONS Switching frequency： 50 KHz - 110 KHz Power factor： 0.98 Typical Efficiency： 85% min. (78% min. for TMP90-05, TMP90-06, TMP90-09 and TMP90-12) Hold-up time： 15 msec minimum at 110VAC Line regulation： ±0.5% maximum at full load Inrush current： 40 amps @ 115VAC or 60 amps @ 230VAC, @ 25ºC cold start Withstand voltage： 4000VAC from input to output 1500VAC from input to ground 500VAC from output to ground MTBF： 150,000 hours minimum at full load at 25ºC ambient, calculated per MIL-HDBK-217F EMC Performance (IEC60601-1-2: 2001) E N 5 5 0 11 : FCC: VCCI: EN61000-3-2: EN61000-3-3: EN61000-4-2: EN61000-4-3: EN61000-4-4: EN61000-4-5: EN61000-4-6: EN61000-4-8: E N 6 1 0 0 0 - 4 - 11 : Class B conducted, Class B radiated Class B conducted, Class B radiated Class B conducted, Class B radiated Harmonic distortion, Class A and D Line flicker ESD, ±8KV air and ±6KV contact Radiated immunity, 3V/m Fast transient/burst, ±2KV Surge, ±1KV diff, ±2KV com. Conducted immunity, 3Vrms Magnetic field immunity, 3A/m Voltage dips, 30% reduction for 500ms, 60% reduction for 100ms and >95% reduction for 10ms Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com MEDICAL GRADE TMP90 SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Output Product No. TMP90-05 TMP90-06 TMP90-09 TMP90-12 TMP90-13.5 TMP90-15 TMP90-18 TMP90-19 TMP90-24 TMP90-30 TMP90-48 Vnom. Imin. Imax. Tol. Maximum Output Power 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A 12.0A 10.0A 7.78A 6.67A 6.3A 5.67A 5.0A 4.74A 3.75A 3.0A 1.87A 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 60W 60W 70W 80W 85W 85W 90W 90W 90W 90W 90W 5V 6V 9V 12V 13.5V 15V 18V 19V 24V 30V 48V NOTES: 1. Ripple and noise: Peak-to–peak with 20MHz bandwidth and 10µF tantalum capacitor in parallel with a 0.1µF ceramic capacitor at rated line voltage and load ranges. 2. To order a model with IEC320/C18 inlet with class II insulation, add suffix “C2” , e.g. TMP90-12-C2. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions show in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 658 grams approx. 4. Standard output connector is a male 4-pin power DIN. Please contact TRUMPower for other connector options. 5. TMP90-05 and TMP90-06 output connectors are without lock. PIN CHART PIN Product No. TMP90-05 TMP90-09 TMP90-13.5 TMP90-18 TMP90-24 TMP90-48 TMP90-06 TMP90-12 TMP90-15 TMP90-19 TMP90-30 1 2 3 4 Shell RETURN OUTPUT +V RETURN OUTPUT +V AC Ground Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com