Bussmann® Time-Delay Glass Fuses C519 5mm x 15mm R C519 Time Delay Fuses 100 250mA 350mA 500mA 750mA 1A 1.25A 1.5A 2.5A 3A Time-Current Characteristic Curves–Average Melt (Full Size Curves Available) AMPERE RATING Dimensional Data 15.0 ± 0.5mm 5.2 ± 0.3mm 5.0mm (Typ.) Markings: Manufacturer’s Symbol, Product Symbol, Voltage, Ampere, Testing Agency Mark (Optional) Dimensions are in Millimeters (mm) TIME IN SECONDS 10 1 Limits for Pre-arcing Time/UL Listed Fuses. Amp Ratings 135% MAX MIN 200% MAX 125mA - 5A 60 min. 3 sec. 2 min. .1 2A MAX 6A MAX 350mA 240 min. 90 sec. 2 sec. 500 millisec. .1 .01 Product Symbol: C519 Physical Fuse Size: 5 x 15mm Mechanical Characteristics: Materials: Endcaps are silver-plated brass; leads are tin-plated copper and tube is glass. Temp. Range: -55°C to +85°C with proper derating. CURRENT IN AMPERES 100 AMPERE RATING 10 TIME IN SECONDS Agency File Numbers: UL Listing. Guide # JDYX, File E75865 CSA Certification. Class 1422-01, File LR65063 UL Recognized. Guide # JDYX2, File E75865d 100 600mA MAX 3.5A 5A 4A 350mA MIN 1 Amp Ratings 10 Limits for Pre-arcing Time/UL Recognized Fuses. 1 .1 100 10 .1 .01 1 CE logo denotes compliance with European Union Low Voltage Directive (50-1000V AC, 75-1500V DC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. CURRENT IN AMPERES 12-17-98 SB98107 Rev. A Form No. C519 Page 1 of 2 BIF Doc #2007 Bussmann® Time-Delay Glass Fuses C519 5mm x 15mm R 375mA 500mA 600mA 750mA 1A 1.25A 1.5A 1.6A 2A 2.25A 2.5A 3A 3.5A 4A 5A 250V AIR 35A/250V 10kA/125V AC p.f. = 0.7 - 0.8 35A/250V 10kA/125V AC 25A/600V p.f. = 0.7 - 0.8 35A/250V AC 10kA/125V AC p.f. = 0.7 - 0.8 100A/250V AC 10ka/125V AC p.f. = 0.7 - 0.8 125V 400A/125V AC p.f. = 1.0 Telecommunication Capabilities: UL 1459: Telephone Equipment Fuses successfully opened: 600 Volts (AC) 40 Amps 600 Volts (AC) 7 Amps 600 Volts (AC) 2.2 Amps UL 497: Protectors for Paired Conductor Communication Circuits Fuses successfully passed without opening: 10 x 1000 microsecond waveform 50 pulses/1 pulse every 8 seconds† @ 1000V Fuse Rating 250mA 350mA 375mA 500mA 600mA 750mA 1A 1.25A Peak Current (A) 12.5 19.5 20.0 28.5 36.5 49.0 66.5 100.0 Voltage Drop (mV) max. 1200 630 520 Pre-arcing Value (I2t) (A2s) typ. 0.039 0.18 0.9 490 410 350 300 250 220 200 200 200 200 190 190 180 150 150 0.9 1.1 2.7 2.7 6.4 7.6 13 14 27 31 42 94 94 145 230 • • CSA Rated Voltage (V)AC U.R. Current Rating 125mA 250mA 350mA U.L. Electrical Characteristics: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Packaging & Ordering Information: C519 Product Symbol Package Code BK/ Bulk Package (100 pcs) TR/ Tape & Reel (500 pcs) TR1/ Tape & Reel (1,000 pcs) TR2/ Tape & Reel (1,500 pcs) NOTE: Tape & Reel Packaging per EIA 296-E (10.2mm Component Pitch and 52.4mm Tape-to-Tape Spacing) Blank - Standard S - Transparent Sleeve for sealed fuses. Ampere Rating 125mA 250mA 350mA 375mA 500mA 600mA 750mA 1A 1.25A 1.5A 1.6A 2A 2.25A 2.5A 3A 3.5A 4A 5A † Fuse resistance was not allowed to vary by more than five percent after completion of the test. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-17-98 SB98107 Rev. A Form No. C519 Page 2 of 2 BIF Doc #2007