TI TS5A22362

TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
0.65-Ω DUAL SPDT ANALOG SWITCHES WITH NEGATIVE SIGNALING CAPABILITY
Check for Samples: TS5A22362, TS5A22364
FEATURES
1
•
•
•
•
•
•
•
•
•
Specified Break-Before-Make Switching
Negative Signaling Capability: Maximum
Swing From –2.75 V to 2.75 V (V+ = 2.75 V)
Internal Shunt Switch Prevents Audible
Click-and-Pop When Switching Between Two
Sources (TS5A22364)
Low ON-State Resistance (0.65 Ω Typical)
Low Charge Injection
Excellent ON-State Resistance Matching
2.3-V to 5.5-V Power Supply (V+)
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 2500-V Human-Body Model
(A114-B, Class II)
– 1500-V Charged-Device Model (C101)
– 200-V Machine Model (A115-A)
APPLICATIONS
•
•
•
•
•
Cell Phones
PDAs
Portable Instrumentation
Audio Routing
Medical Imaging
DRC PACKAGE
(TOP VIEW)
V+
1
NO1
2
10 NO2
Exposed
Center
Pad
9
COM2
8
NC2
COM1
3
NC1
4
7
IN2
IN1
5
6
GND
The exposed center pad, if used, must be
connected as a secondary GND or left
electrically open.
DGS PACKAGE
(TOP VIEW)
V+
1
10
NO2
NO1
2
9
COM2
COM1
3
8
NC2
NC1
4
7
IN2
IN1
5
6
GND
YZP PACKAGE TERMINAL ASSIGNMENTS
YZP PACKAGE
D
IN1
GND
IN2
D
D
C
NC1
NC2
C
C
B
COM1
COM2
B
B
A
NO1
V+
NO2
A
A
3
2
1
3
2
1
Laser Marking View
1
2
3
Bump View
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2011, Texas Instruments Incorporated
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
DESCRIPTION/ORDERING INFORMATION
The TS5A22362 and TS5A22364 are single-pole double-throw (SPDT) analog switches designed to operate from
2.3 V to 5.5 V. The devices feature negative signal capability that allows signals below ground to pass through
the switch without distortion. Additionally, the TS5A22364 includes an internal shunt switch, which automatically
discharges any capacitance at the NC or NO terminals when they are unconnected to COM. This reduces the
audible click/pop noise when switching between two sources. The break-before-make feature prevents signal
distortion during the transferring of a signal from one path to another. Low ON-state resistance, excellent
channel-to-channel ON-state resistance matching, and minimal total harmonic distortion (THD) performance are
ideal for audio applications. The 3x3 mm DRC package is also available as a non-magnetic package for medical
imaging application.
ORDERING INFORMATION
TA
–40°C to 85°C
PACKAGE
(1) (2)
NanoFree™ – WCSP (DSBGA)
YZP (Pb-free)
Tape and reel
MSOP (VSSOP) – DGS
Tape and reel
SON – DRC
(1)
(2)
(3)
ORDERABLE PART NUMBER
Tape and reel
TOP-SIDE MARKING (3)
TS5A22362YZPR
392
TS5A22364YZPR
382
TS5A22362DGSR
39R
TS5A22364DGSR
38R
TS5A22362DRCR
ZVG
TS5A22364DRCR
ZVF
TS5A22362DRCT-NM
ZVGNM
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
SUMMARY OF CHARACTERISTICS
V+ = 2.7 V, TA = 25°C
2:1 Multiplexer/Demultiplexer
(2 × SPDT)
Configuration
Number of channels
2
ON-state resistance (ron)
0.65 Ω
ON-state resistance match (Δron)
0.023 Ω
0.18 Ω
ON-state resistance flatness (ron(flat))
Turn-on/turn-off time (tON/tOFF)
80 ns/70 ns
Break-before-make time (tBBM)
7 ns
Charge injection (QC)
150 pC
Bandwidth (BW)
17 MHz
OFF isolation (OISO)
–66 dB at 100 kHz
Crosstalk (XTALK)
–75 dB at 100 kHz
Total harmonic distortion (THD)
0.01%
Leakage current (INO(OFF), INC(OFF))
50 nA
10-pin WCSP (YZP),
10-pin VSSOP (DGS),
and 10-pin SON (DRC)
Package options
FUNCTION TABLE
NC TO COM,
COM TO NC
NO TO COM,
COM TO NO
L
ON
OFF
H
OFF
ON
IN
2
Submit Documentation Feedback
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
APPLICATION BLOCK DIAGRAMS
OUT+
Audio
Source 1
NC1
TS5A22364
OUT–
COM1
IN1
NO1
8-Ω Speaker
Shunt
Switch
IN2
NC2
COM2
OUT+
Audio
Source 2
OUT–
Input Select
NO2
Figure 1. TS5A22364 Application Block Diagram
Shunt Switch (TS5A22364)
The 50-Ω shunt switches on the TS5A22364 automatically discharge any capacitance at the NC or NO terminals
when they are unconnected to COM. This reduces audible click-and-pop sounds that occur when switching
between audio sources. Audible clicks and pops are caused when a step DC voltage is switched into the
speaker. By automatically discharging the side that is not connected, any residual DC voltage is removed,
thereby reducing the clicks and pops.
OUT+
Audio
Source 1
NC1
OUT–
COM1
NO1
IN1
8-Ω Speaker
TS5A22362
NC2
OUT–
IN2
COM2
OUT+
Audio
Source 2
Input Select
NO2
Figure 2. TS5A22362 Application Block Diagram
Negative Signaling Capacity
The TS5A22362 and TS5A22364 dual SPDT switches feature negative signal capability that allows signals below
ground to pass through without distortion. These analog switches operate from a single +2.3-V to +5.5-V supply.
The input/output signal swing of the device is dependant of the supply voltage V+: the devices pass signals as
high as V+ and as low as V+ – 5.5 V, including signals below ground with minimal distortion.
Table 1 shows the input/output signal swing the user can get with different supply voltages.
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
Submit Documentation Feedback
3
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
Table 1. INPUT/OUTPUT SIGNAL SWING
SUPPLY VOLTAGE, V+
MINIMUM
(VNC, VNO, VCOM) = V+ – 5.5
MAXIMUM
(VNC, VNO, VCOM) = V+
5.5 V
0V
5.5 V
4.2 V
–1.3 V
4.2 V
3.3 V
–2.2 V
3.3 V
3V
–2.5 V
3V
2.5 V
–3 V
2.5 V
ABSOLUTE MINIMUM AND MAXIMUM RATINGS (1)
(2)
over operating free-air temperature range (unless otherwise noted)
(3)
V+
Supply voltage range
VNC
VNO
VCOM
Analog voltage range (3)
II/OK
Analog port diode current
INC
INO
ICOM
ON-state switch current
VI
Digital input voltage range
(4) (5)
VNC, VNO, VCOM < 0
or
VNC, VNO, VCOM > V+
VNC, VNO, VCOM = 0 to V+
ON-state peak switch current (6)
(3) (4)
VI < 0
IIK
Digital input clamp current
I+
IGND
Continuous current through V+or GND
Tstg
Storage temperature range
(1)
(2)
(3)
(4)
(5)
(6)
MIN
MAX
UNIT
–0.5
6
V
V+ – 6
V+ + 0.5
V
–50
50
–150
150
–300
300
–0.5
6.5
V
–50
50
mA
–100
100
mA
–65
150
°C
mA
mA
Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All voltages are with respect to ground, unless otherwise specified.
The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
This value is limited to 5.5 V maximum.
Pulse at 1-ms duration <10% duty cycle
THERMAL IMPEDANCE RATINGS
UNIT
θJA
(1)
4
Package thermal impedance (1)
DGS package
56.5
DRC package
165.36
YZP package
93
°C/W
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1)
V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
ON-state
resistance
ON-state
resistance match
between
channels
ON-state
resistance
flatness
Shunt switch
resistance
(TS5A22364
only)
VCOM,
VNO, VNC
ron
V+ – 5.5
VNC or VNO = V+, 1.5 V,
V+ – 5.5 V
ICOM = –100 mA,
COM to NO or NC,
See Figure 16
VNC or VNO = 1.5 V,
ICOM = –100 mA,
COM to NO or NC,
See Figure 16
VNC or VNO = V+, 1.5 V,
V+ – 5.5 V
ICOM = –100 mA,
COM to NO or NC,
See Figure 16
25°C
Full
0.65
2.7 V
ron(flat)
rSH
INO or INC = 10 mA
Full
NC, NO
OFF leakage
current
(TS5A22362
Only)
INC(OFF),
INO(OFF)
COM
ON leakage
current
ICOM(ON)
VNC and VNO = Open,
VCOM = V+,V+ – 5.5 V,
2.7 V
Full
0.18
2.7 V
25°C
Full
2.7
25°C
See Figure 18
Full
2.7 V
25
Ω
0.46
0.5
2.7 V
Ω
0.11
0.15
25°C
Full
VNC = 2.25 V, V+ – 5.5 V
VCOM = V+ – 5.5 V, 2.25 V
VNO = Open
COM to NO
or
See Figure 17
VNO = 2.25 V, V+ – 5.5 V,
VCOM = V+ – 5.5 V, 2.25 V
VNC = Open
COM to NC
0.023
V
0.94
1.04
25°C
Δron
V+
50
Ω
Ω
–50
50
–375
375
–50
50
–375
375
1.4
5.5
V
0.6
V
–250
250
–250
250
nA
nA
Digital Control Inputs (IN) (2)
Input logic high
VIH
Input logic low
VIL
Input leakage
current
(1)
(2)
IIH, IIL
Full
Full
VIN = V+ or 0
25°C
Full
2.7 V
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
Submit Documentation Feedback
5
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY(1) (continued)
V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
44
80
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 300 Ω,
CL = 35 pF,
See Figure 20
Turn-off time
tOFF
VCOM = V+,
RL = 300 Ω,
CL = 35 pF,
See Figure 20
Break-beforemake time
tBBM
25°C
2.5 V
Full
2.3 V to
2.7 V
25°C
2.5 V
Full
2.3 V to
2.7 V
See Figure 21 for TS5A22362
See Figure 22 for TS5A22364
25°C
2.5 V
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 26
25°C
80
22
70
70
1
ns
ns
7
ns
2.5 V
150
pC
Charge injection
QC
NC, NO
OFF capacitance
(TS5A22362
only)
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
See Figure 19
25°C
2.5 V
70
pF
NC, NO, COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON, f = 10 MHz
See Figure 19
25°C
2.5 V
370
pF
VI = V+ or GND
See Figure 19
25°C
2.5 V
2.6
pF
RL = 50 Ω, –3 dB
See Figure 21
25°C
2.5 V
17
MHz
25°C
2.5 V
–66
dB
Digital input
capacitance
Bandwidth
CI
BW
OFF isolation
OISO
RL = 50 Ω
f = 100 kHz,
See Figure 24
Crosstalk
XTALK
RL = 50 Ω
f = 100 kHz,
See Figure 25
25°C
2.5 V
–75
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 15 pF,
f = 20 Hz to
20 kHz,
See Figure 27
25°C
2.5 V
0.01
%
Supply
Positive
supply current
I+
VI = V+ or GND
Positive
supply current
I+
VI = V+ – 5.5 V
6
Submit Documentation Feedback
25°C
2.7 V
Full
Full
2.7 V
0.2
1.1
1.3
3.3
μA
μA
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
ON-state
resistance
ON-state
resistance match
between
channels
ON-state
resistance
flatness
Shunt switch
resistance
(TS5A22364
only)
VCOM,
VNO, VNC
ron
Δron
ron(flat)
rSH
V+ – 5.5
VNC or VNO ≤ V+,
1.5 V,
V+ – 5.5 V,
ICOM = –100 mA,
COM to NO or
NC,
See Figure 16
VNC or VNO = 1.5 V,
ICOM = –100 mA,
COM to NO or
NC,
See Figure 16
VNC or VNO ≤ V+,
1.5 V,
V+ – 5.5 V,
ICOM = –100 mA,
COM to NO or
NC,
See Figure 16
25°C
Full
Full
Full
25°C
See Figure 17
COM to NO or
NC,
See Figure 18
NC, NO
OFF leakage
current
(TS5A22362
only)
INC(OFF),
INO(OFF)
COM
ON leakage
current
ICOM(ON)
VNC and VNO = Open,
VCOM = V+,V+ – 5.5 V,
3V
0.024
3V
Full
3V
3.6 V
25°C
Full
3.6 V
25
Ω
0.46
0.5
3V
Ω
0.13
0.13
0.12
V
0.87
0.97
25°C
INO or INC = 10 mA
VNC = 3 V, V+ – 5.5 V
VCOM = V+ – 5.5 V, 3 V
VNO = Open
COM to NO
or
VNO = 3 V, V+ – 5.5 V,
VCOM = V+ – 5.5 V, 3 V
VNC = Open
COM to NC
0.61
25°C
Full
V+
37
Ω
Ω
–50
50
–375
375
–50
50
–375
375
1.4
5.5
V
0.8
V
nA
nA
Digital Control Inputs (IN) (2)
Input logic high
VIH
Full
Input logic low
VIL
Full
Input leakage
current
IIH, IIL
(1)
(2)
VIN = V + or 0
25°C
Full
3.6 V
–250
250
–250
250
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
Submit Documentation Feedback
7
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY(1) (continued)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
34
80
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 300 Ω,
CL = 35 pF,
See Figure 20
Turn-off time
tOFF
VCOM = V+,
RL = 300 Ω,
CL = 35 pF,
See Figure 20
Break-beforemake time
tBBM
Charge injection
QC
NC, NO
OFF capacitance
(TS5A22362
only)
NC, NO, COM
ON capacitance
Digital input
capacitance
25°C
3.3 V
Full
3 V to
3.6 V
25°C
3.3 V
Full
3 V to
3.6 V
See Figure 21 for TS5A22362
See Figure 22 for TS5A22364
25°C
3.3 V
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 26
25°C
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or
V+ – 5.5 V,
See Figure 19
CCOM(ON)
VCOM = V+ or GND,
f = 10 MHz
CI
80
19
70
70
1
ns
ns
7
ns
3.3 V
150
pC
25°C
3.3 V
70
pF
See Figure 19
25°C
3.3 V
370
pF
VI = V+ or GND
See Figure 19
25°C
3.3 V
2.6
pF
Bandwidth
BW
RL = 50 Ω, –3 dB
Switch ON,
See Figure 21
25°C
3.3 V
17.5
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 100 kHz,
See Figure 24
25°C
3.3 V
–68
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 100 kHz,
See Figure 25
25°C
3.3 V
–76
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 15 pF,
f = 20 Hz to 20
kHz,
See Figure 27
25°C
3.3 V
0.008
%
Supply
Positive
supply current
I+
VI = V+ or GND
VI = V+ –5.5 V
8
Submit Documentation Feedback
25°C
3.6 V
Full
Full
3.6 V
0.1
1.2
1.3
3.4
μA
μA
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1)
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
ON-state
resistance
ON-state
resistance match
between
channels
ON-state
resistance
flatness
Shunt switch
resistance
(TS5A22364
only)
VCOM,
VNO, VNC
ron
Δron
ron(flat)
rSH
V+ – 5.5
VNC or VNO = V+, 1.6 V,
V+ = –5.5 V,
ICOM = –100 mA,
COM to NO or
NC,
See Figure 16
VNC or VNO = 1.6 V,
ICOM = –100 mA,
COM to NO or
NC,
See Figure 16
VNC or VNO = V+, 1.6 V,
V+ = –5.5 V,
ICOM = –100 mA,
COM to NO or
NC,
See Figure 16
INO or INC = 10 mA
NC, NO
OFF leakage
current
INC(OFF),
INO(OFF)
VNC = 4.5 V, V+ – 5.5 V
VCOM = V+ – 5.5 V, 4.5 V
VNO = Open
COM to NO
or
VNO = 4.5 V, V+ – 5.5 V,
VCOM = V+ – 5.5 V, 4.5 V
VNC = Open
COM to NC
COM
ON leakage
current
ICOM(ON)
VNC and VNO = Open,
VCOM = V+, V+ – 5.5 V,
25°C
Full
0.52
4.5 V
0.04
4.5 V
Full
Full
0.076
4.5 V
25°C
See Figure 17
See Figure 18
Full
5.5 V
25°C
Full
5.5 V
16
Ω
0.46
0.5
4.5 V
Ω
0.23
0.30
25°C
V
0.74
0.83
25°C
Full
V+
36
Ω
Ω
–50
50
–375
375
–50
50
–375
375
2.4
5.5
V
0.8
V
–250
250
–250
250
nA
nA
Digital Control Inputs (IN) (2)
Input logic high
VIH
Input logic low
VIL
Input leakage
current
(1)
(2)
IIH, IIL
Full
Full
VIN = V + or 0
25°C
Full
5.5 V
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
Submit Documentation Feedback
9
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY(1) (continued)
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
27
80
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 300 Ω,
CL = 35 pF,
See Figure 20
Turn-off time
tOFF
VCOM = V+,
RL = 300 Ω,
CL = 35 pF,
See Figure 20
Break-beforemake time
tBBM
VNC = VNO = V+/2
RL = 300 Ω,
25°C
5V
Full
4.5 V to
5.5 V
25°C
5V
Full
4.5 V to
5.5 V
CL = 35 pF,
See Figure 21
25°C
5V
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 26
25°C
80
13
70
70
1
ns
ns
3.5
ns
5V
10
pC
Charge injection
QC
NC, NO
OFF capacitance
(TS5A22362
only)
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or
V+ – 5.5 V,
See Figure 19
25°C
5V
70
pF
NC, NO, COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
See Figure 19
25°C
5V
370
pF
VI = V+ or GND
See Figure 19
25°C
5V
2.6
pF
RL = 50 Ω,
See Figure 21
25°C
5V
18.3
MHz
25°C
5V
–70
dB
Digital input
capacitance
Bandwidth
CI
BW
OFF isolation
OISO
RL = 50 Ω,
f = 100 kHz,
See Figure 24
Crosstalk
XTALK
RL = 50 Ω,
f = 100 kHz,
See Figure 25
25°C
5V
–78
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 15 pF,
f = 20 Hz to 20
kHz,
See Figure 27
25°C
5V
0.009
%
Supply
Positive
supply current
I+
VI = V+ or GND
VI = V+ – 5.5 V
10
Submit Documentation Feedback
25°C
0.2
Full
5.5 V
Full
1.3
3.5
μA
5
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
TYPICAL PERFORMANCE
1.2
0.8
V+ = 2.3 V
0.6
ron (Ω)
0.8
ron (Ω)
TA = 85°C
TA = 25°C
TA = -40°C
0.7
1
0.6
V+ = 3 V
0.5
0.4
0.3
0.4
0.2
V+ = 4.5 V
0.2
0.1
0
0
–3
–4.0
–2.0
0.0
2.0
4.0
–2
–1
6.0
0
VCOM (V)
1
3
2
VCOM (V)
Figure 3. ron vs VCOM
Figure 4. ron vs VCOM (V+ = 2.7 V)
0.6
0.50
0.45
0.5
0.40
0.35
ron (Ω)
ron (Ω)
0.4
0.3
TA = 85°C
TA = 25°C
TA = -40 °C
0.2
0.30
0.25
0.20
TA = 85°C
TA = 25°C
TA = -40 °C
0.15
0.1
0.10
0.0
–3
0.00
0.05
–2
–1
0
1
3
2
4
–1
0
VCOM (V)
2
3
4
5
VCOM (V)
Figure 5. ron vs VCOM (V+ = 3.3 V)
Figure 6. ron vs VCOM (V+ = 5 V)
150
0
130
–2
–4
90
70
COM (on)
50
NO/NC (on)
30
Magnitude (dB)
110
Leakage (nA)
1
–6
–8
–10
–12
–14
–10
–16
-40
25
85
Temperature (°C)
–18
Figure 7. Leakage Current vs Temperature
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
1
Frequency (MHz)
1000
Figure 8. Insertion Loss
Submit Documentation Feedback
11
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
TYPICAL PERFORMANCE (continued)
500
-10
400
Charge Injection (pC)
0
Attenuation (dB)
-20
-30
-40
-50
-60
300
VCC = 3.3 V
200
100
VCC = 5 V
0
VCC = 2.5 V
–100
-70
–200
-80
0
-90
1
Frequency (MHz)
2.5
5
3.3
Voltage (V)
1000
Figure 9. OFF Isolation vs Frequency
Figure 10. Charge Injection (QC) vs VCOM
0
0.0091
-10
0.0081
-20
0.0071
-30
0.0061
-40
0.0051
THD
Attenuation (dB)
1.8
-50
0.0041
0.0031
-60
0.0021
-70
0.0011
-80
-90
1000
1
Frequency (MHz)
0.0001
10
100
1000
10000
Figure 11. Crosstalk (V+ = 3.3 V)
Figure 12. Total Harmonic Distortion vs Frequency
3.5E-08
200
3.0E-08
180
tOFF
tON
160
140
2.0E-08
tON/tOFF (ns)
I+ (μA)
2.5E-08
1.5E-08
1.0E-08
120
100
80
60
40
5.0E-09
0.0E+00
0.0
100000
Frequency (Hz)
20
0.5
1.0
1.5
2.5 3.0
V+ (V)
3.5
4.0
4.5
5.5
0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Supply Voltage (V)
Figure 13. Power-Supply Current vs V+
12
Submit Documentation Feedback
Figure 14. tON and tOFF vs Supply Voltage
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
TYPICAL PERFORMANCE (continued)
50
45
40
tOFF
tON
tON/tOFF (ns)
35
30
25
20
15
10
5
0
–40
Figure 15. tON
25
85
Temperature(°C)
and tOFF vs Temperature (2.5-V Supply)
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
Submit Documentation Feedback
13
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
PARAMETER MEASUREMENT INFORMATION
+
Ω
IN
+
Figure 16. ON-State Resistance (rON)
OFF-State Leakage Current
Channel OFF
VI = VIH or VIL
+
+
IN
+
Figure 17. OFF-State Leakage Current
(ICOM(OFF), INO(OFF))
ON-State Leakage Current
Channel ON
VI = VIH or VIL
+
IN
+
Figure 18. ON-State Leakage Current
(ICOM(ON), INO(ON))
14
Submit Documentation Feedback
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
VNO
NO
Capacitance
Meter
VBIAS = V+ or GND and
VI = VIH or VIL
VBIAS
Capacitance is measured at NO,
COM, and IN inputs during ON
and OFF conditions.
COM COM
Figure 19. Capacitance
(CI, CCOM(OFF), CCOM(ON), CNO(OFF), CNO(ON))
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
B.
CL includes probe and jig capacitance.
TEST
RL
CL
VCOM
tON
300 Ω
35 pF
V+
tOFF
300 Ω
35 pF
V+
IN
Logic
Intput
(VI)
tON
tOFF
90%
Switch
Output
(VNO)
90%
Figure 20. Turn-On (tON) and Turn-Off Time (tOFF)
A.
CL includes probe and jig capacitance.
B.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
Submit Documentation Feedback
15
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
VNC or VNO
NC or NO
NC or NO
VOH
VNC or VNO = V+/2
RL = 300 Ω
CL = 35 pF
Figure 21. Break-Before-Make Time (tBBM)
(TS5A22362 Only)
VNC or VNO
NC or NO
V+
RPU
NC or NO
VOH
10%
10%
VNC or VNO = GND
RL = 1 kΩ
RPU = 100 Ω
CL = 35 pF
Figure 22. Break-Before-Make Time (tBBM)
(TS5A22364 Only)
16
A.
CL includes probe and jig capacitance.
B.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
Submit Documentation Feedback
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
Channel ON: NO to COM
VI = VIH or VIL
50 Ω
Network Analyzer Setup
Source Power = 0 dBM
(632-mV P-P at 50-Ω load)
DC Bias = 350 mV
IN
Ω
+
Figure 23. Bandwidth (BW)
Channel OFF: NO to COM
VI = VIH or VIL
50 Ω
Ω
Network Analyzer Setup
Source Power = 0 dBM
(632-mV P-P at 50-Ω load)
DC Bias = 350 mV
IN
Ω
+
Figure 24. OFF Isolation (OISO)
50 Ω
VNC
NC
VNO
NO
Channel ON: NC to COM
Channel OFF: NO to COM
VI = VIH or VIL
Ω
IN
Ω
+
Network Analyzer Setup
Source Power = 0 dBM
(632-mV P-P at 50-Ω load)
DC Bias = 350 mV
Figure 25. Crosstalk (XTALK)
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
B.
CL includes probe and jig capacitance.
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
Submit Documentation Feedback
17
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
Δ
IN
xΔ
Figure 26. Charge Injection (QC)
A.
CL includes probe and jig capacitance.
Channel ON: COM to NO
VSOURCE = V+ P-P
VI = VIH or VIL
fSOURCE = 20 Hz to 20 kHz
RL = 600 Ω
CL = 50 pF
V+/2
Audio Analyzer
NO
600 Ω
COM
IN
+
600 Ω
–V+/2
Figure 27. Total Harmonic Distortion (THD)
18
Submit Documentation Feedback
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
TS5A22362, TS5A22364
SCDS261D – MARCH 2008 – REVISED NOVEMBER 2011
www.ti.com
Changes from Revision C (April 2010) to Revision D
Page
•
Added Medical Imaging to Application. ................................................................................................................................. 1
•
Added TS5A22362DRCT-NM orderable part number to the ORDERING INFROMATION table. ....................................... 2
Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): TS5A22362 TS5A22364
Submit Documentation Feedback
19
PACKAGE OPTION ADDENDUM
www.ti.com
17-Dec-2011
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package
Drawing
Pins
Package Qty
Eco Plan
(2)
Lead/
Ball Finish
MSL Peak Temp
(3)
(Requires Login)
TS5A22362DGSR
ACTIVE
MSOP
DGS
10
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TS5A22362DGSRG4
ACTIVE
MSOP
DGS
10
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TS5A22362DRCR
ACTIVE
SON
DRC
10
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TS5A22362DRCRG4
ACTIVE
SON
DRC
10
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TS5A22362DRCT-NM
ACTIVE
SON
DRC
10
250
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
TS5A22362YZPR
ACTIVE
DSBGA
YZP
10
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
TS5A22364DGSR
ACTIVE
MSOP
DGS
10
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TS5A22364DGSRG4
ACTIVE
MSOP
DGS
10
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TS5A22364DRCR
ACTIVE
SON
DRC
10
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TS5A22364YZPR
ACTIVE
DSBGA
YZP
10
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Samples
Level-1-260C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
17-Dec-2011
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Mar-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
TS5A22362DGSR
MSOP
DGS
10
2500
330.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
TS5A22362DRCR
SON
DRC
10
3000
330.0
12.4
3.3
3.3
1.1
8.0
12.0
Q2
TS5A22362DRCT-NM
SON
DRC
10
250
180.0
12.4
3.3
3.3
1.1
8.0
12.0
Q2
TS5A22362YZPR
DSBGA
YZP
10
3000
180.0
8.4
1.5
2.03
0.7
4.0
8.0
Q2
TS5A22364DGSR
MSOP
DGS
10
2500
330.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
TS5A22364DRCR
SON
DRC
10
3000
330.0
12.4
3.3
3.3
1.1
8.0
12.0
Q2
TS5A22364YZPR
DSBGA
YZP
10
3000
180.0
8.4
1.5
2.03
0.7
4.0
8.0
Q2
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Mar-2012
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TS5A22362DGSR
MSOP
DGS
10
2500
358.0
335.0
35.0
TS5A22362DRCR
SON
DRC
10
3000
346.0
346.0
29.0
TS5A22362DRCT-NM
SON
DRC
10
250
210.0
185.0
35.0
TS5A22362YZPR
DSBGA
YZP
10
3000
220.0
220.0
34.0
TS5A22364DGSR
MSOP
DGS
10
2500
358.0
335.0
35.0
TS5A22364DRCR
SON
DRC
10
3000
346.0
346.0
29.0
TS5A22364YZPR
DSBGA
YZP
10
3000
220.0
220.0
34.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
Wireless Connectivity
www.ti.com/wirelessconnectivity
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated