VISHAY V10P45-M3-87A

New Product
V10P45
Vishay General Semiconductor
High Current Density Surface Mount
Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.34 V at IF = 5 A
FEATURES
TMBS®
eSMP® Series
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
• Trench MOS Schottky technology
K
• Low forward voltage drop, low power losses
• High efficiency operation
1
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
2
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TO-277A (SMPC)
K
Anode 1
Cathode
Anode 2
• Halogen-free according to IEC 61249-2-21 definition
TYPICAL APPLICATIONS
For use in low voltage high frequency DC/DC converters,
freewheeling, and polarity protection applications.
PRIMARY CHARACTERISTICS
IF(AV)
10 A
MECHANICAL DATA
VRRM
45 V
IFSM
180 A
VF at IF = 10 A
0.41 V
TJ max.
150 °C
Case: TO-277A (SMPC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
Base P/NH-M3 - halogen-free, RoHS compliant, and
automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
Maximum repetitive peak reverse voltage
Maximum DC forward current
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
Operating junction and storage temperature range
V10P45
UNIT
V1045
VRRM
45
V
IF
(1)
10
IF
(2)
4.4
IFSM
180
A
TJ, TSTG
- 40 to + 150
°C
A
Notes
(1) Mounted on 30 mm x 30 mm pad areas aluminum PCB
(2) Free air, mounted on recommended copper pad area
Document Number: 89340
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
V10P45
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 5.0 A
TA = 25 °C
IF = 10 A
Instantaneous forward voltage
VF (1)
IF = 5.0 A
TA = 25 °C
VR = 45 V
TA = 125 °C
TYP.
MAX.
UNIT
0.42
-
0.48
0.57
0.34
-
0.41
0.50
21
800
μA
9
35
mA
V
TA = 125 °C
IF = 10 A
Reverse current
SYMBOL
IR (2)
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
SYMBOL
V10P45
RJA (1)
75
RJM (2)
4
UNIT
°C/W
Notes
(1) Free air, mounted on recommended copper pad area; thermal resistance R
JA - junction to ambient
(2) Mounted on 30 mm x 30 mm aluminum PCB; thermal resistance R
JM - junction to mount
ORDERING INFORMATION (Example)
PREFERRED P/N
V10P45-M3/86A
V10P45-M3/87A
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.10
86A
1500
7" diameter plastic tape and reel
0.10
87A
6500
13" diameter plastic tape and reel
V10P45HM3/86A
(1)
0.10
86A
1500
7" diameter plastic tape and reel
V10P45HM3/87A
(1)
0.10
87A
6500
13" diameter plastic tape and reel
Note
(1) AEC-Q101
qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
Notes
Mounted on 30 mm x 30 mm aluminum PCB; TM measured
at the terminal of cathode band (RJM = 4 °C/W)
(2) Free air, mounted on recommended copper pad area
(RJA = 75 °C/W)
12
(1)
DC Forward Current (A)
TM = 121 °C
(1)
10
8
6
TA = 25 °C (2)
4
2
0
0
25
50
75
100
125
150
TM - Mount Temperature (°C)
Fig. 1 - Maximum Forward Current Derating Curve
www.vishay.com
2
For technical questions within your region, please contact one of the following:
Document Number: 89340
[email protected], [email protected], [email protected]
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
V10P45
Vishay General Semiconductor
10 000
D = 0.5 D = 0.8
D = 0.3
6
Junction Capacitance (pF)
Average Power Loss (W)
7
D = 0.2
5
D = 1.0
D = 0.1
4
3
T
2
1
D = tp/T
2
6
4
8
10
100
0.1
12
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
Transient Thermal Impedance (°C/W)
100
Instantaneous Forward Current (A)
1000
tp
0
0
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TA = 150 °C
10
TA = 125 °C
TA = 100 °C
1
TA = 25 °C
0.1
0.1
0
0.2
0.3
0.5
0.4
0.6
0.7
100
Junction to Ambient
10
1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Instantaneous Reverse Current (A)
100
TA = 150 °C
10
TA = 125 °C
TA = 100 °C
1
0.1
TA = 25 °C
0.01
0.001
20
30
40
50
60
70
80
90
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Leakage Characteristics
Document Number: 89340
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
V10P45
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-277A (SMPC)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
K
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
2
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC TO-277A
www.vishay.com
4
For technical questions within your region, please contact one of the following:
Document Number: 89340
[email protected], [email protected], [email protected]
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1