General Purpose Relays Power PCB Relay U/UB I 1 pole 7 A, mono or bistable I 1 CO or 1 NO or 1 NC contact I Bistable and DC-version I Wash tight version I Version for 10 A on request I RoHS compliant (Directive 2002/95/EC) as per product date code 0402 Applications Heating control, installation, battery powered equipment F0153-B Approvals Z E194065 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated current 1 CO, 1 NO or 1 NC single contact micro disconnection standard and bistable: 7 A sensitive: 5 A Rated voltage / max.switching voltage AC 240/400 V Maximum breaking capacity AC standard and bistable: 1750 VA sensitive: 1250 VA Limiting making capacity, max 4 s, duty factor 10% 12 A Contact material AgNi 90/10 Mechanical endurance 20x106 cycles Rated frequency of operation with / without load 10/300 min-1 Contact ratings Type standard and bistable standard sensitive bistable standard and bistable sensitive Load 7 A, 250 VAC, resistive 5 A, 250 VAC, resistive 5 A, 250 VAC, resistive 5 A, 250 VAC, resistive 7 A, 24 VDC, resistive 5 A, 24 VDC, resistive Cycles 5x104 1,5x105 1x105 1x105 5x104 3x104 Coil data Rated coil voltage range DC coil Coil power DC coil 3..24 VDC 48 VDC Operative range monostable sensitive 6 ... 48 VDC 450 mW 610 mW 2 330 mW 570 mW Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW standard coil 003 6 4.2 0.6 80+10% 450 005 12 8.4 1.2 320+10% 450 007 24 16.8 2.4 1280+10% 450 008 48 33.6 4.8 3800+10% 606 sensitive coil 103 6 4.4 0.6 110+10% 327 105 12 8.8 1.2 440+10% 327 107 24 17.5 2.4 1780+10% 324 108 48 35.0 4.8 4000+10% 576 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Power PCB Relay U/UB (Continued) Coil data Rated coil voltage range Rated operate power Reset voltage min., % of rated coil voltage Reset voltage max., % of rated coil voltage bistable 6 ... 48 VDC 900...1300 mW / 20 ms 25% 45% PCB layout / terminal assignment Bottom view on solder pins Monostable and bistable 1 coil Coil versions, bistable Coil Rated Operate Reset Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 003 6 4.7 1.5 33+10% 1091 005 12 9.4 3.0 119+10% 1210 007 24 18.7 6.0 475+10% 1213 008 48 37.4 12.0 1750+10% 1317 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request S0285-AA Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category 2000 Vrms version V23148-*0*** 4000 Vrms version V23148-*1*** 1000 Vrms W 2.5 / 2.5 mm version V23148-*0*** W 3.5 /3.5 mm version V23148-*1*** W IIIa basic functional 250 V 2 230/400 V II CO contact S0285-AB NO contact Other data RoHS - Directive 2002/95/EC Flammability class according to UL94 Ambient temperature range Operate- / release time compliant as per produc date code 0402 V-0 -25...+70°C standard: 5/3 ms sensitive: 7/3 ms Operate- / reset time 5/3 ms Bounce time NO / NC contact 2/10 ms Vibration resistance (function) NO / NC contact 10/10 g Shock resistance (function) NO / NC contact 10/10 g Category of protection RT III - wash tight Resistance to soldering heat wash-tight version 260°C / 5 s Relay weight 9,5 g Packaging unit 25 pcs S0285-AC NC contact S0285-AD Dimensions S0286-A 2 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Power PCB Relay U/UB (Continued) Product key Type Version A B Dielectric 0 Version 0 1 V 2 3 1 4 8 - - 1 0 1 monostable (Miniature power relay U) bistable (Miniature power relay UB, remanence version) strength coil-contact 1 4 kVrms 2 kVrms monostable standard sensitive 0 bistable standard Coil 03 6 VDC 05 12 VDC Contact configuration A 1 CO contact B 1 NO contact Contact material 101 AgNi10 Other types on request Product key V23148-A0003-A101 V23148-A0003-B101 V23148-A0005-A101 V23148-A0005-B101 V23148-A0007-A101 V23148-A0007-B101 V23148-A0008-A101 V23148-A0105-A101 V23148-A0107-A101 V23148-A1005-A101 V23148-A1007-A101 V23148-A1105-A101 V23148-A1107-A101 V23148-B0003-A101 V23148-B0005-A101 V23148-B0007-A101 V23148-B0008-A101 07 24 VDC 08 48 VDC C Version monostable relay ‘U’ AgNi10 1 NC contact Dielectric 2000 Vrms contact-coil Version standard sensitive 4000 Vrms contact-coil standard sensitive bistable relay ‘UB’ AgNi10 2000 Vrms contact-coil standard Configuration 1 CO contact 1 NO contact 1 CO contact 1 NO contact 1 CO contact 1 NO contact 1 CO contact Coil 6 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC 12 VDC 24 VDC 12 VDC 24 VDC 6 VDC 12 VDC 24 VDC 48 VDC Part number 0-1393203-4 0-1393203-5 0-1393203-8 0-1393203-9 1-1393203-1 1-1393203-2 1-1393203-4 2-1393203-1 2-1393203-4 2-1393203-7 2-1393203-8 2-1393203-9 3-1393203-1 0-1393204-4 0-1393204-7 1-1393204-0 1-1393204-3 3 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.