VJ X8R www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Temperature Applications FEATURES • Specialty: High temperature applications • High operating temperature dielectric, up to + 150 °C • Maintains capacitance at high temperature for frequency stability • Wet build process • Reliable Noble Metal Electrode (NME) system • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition APPLICATIONS • High temperature modules ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at + 25 °C unless otherwise specified. Operating Temperature: - 55 °C to + 150 °C Aging Rate: 1 % maximum per decade Capacitance Range: 470 pF to 390 nF Insulation Resistance (IR): At + 25 °C and rated voltage 100 000 M minimum or 1000 F, whichever is less At + 125 °C and rated voltage 10 000 M minimum or 100 F, whichever is less Voltage Range: 25 VDC to 50 VDC Temperature Coefficient of Capacitance (TCC): ± 15 % from - 55 °C to + 150 °C Dielectric Strength Test: Performed per method 103 of EIA-198-2-E Applied test voltage: 50 VDC-rated: 250 % of rated voltage Dissipation Factor (DF): 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz 50 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz Revision: 08-Aug-11 1 Document Number: 45006 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ X8R www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CASE MAXIMUM VOLTAGE (V) X8R 0603 0805 1206 1210 50 50 50 50 CAPACITANCE MINIMUM 470 pF 470 pF 1.0 nF 10 nF MAXIMUM 33 nF 100 nF 220 nF 390 nF Note • Detail ratings see selection chart ORDERING INFORMATION VJ0805 H 102 K X A A CASE CODE DIELECTRIC CAPCITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (1) MARKING (4) C 0603 0805 1206 1210 H = X8R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 102 = 1000 pF J=±5% K = ± 10 % M = ± 20 % X = Ni barrier 100 % tin plated F, E = AgPd (3) X = 25 V A = 50 V A = Unmarked M = Marked Note: Marking is only available for 0805 and 1206 with termination code “X” ### (2) PACKAGING PROCESS CODE T = 7" reel/plastic tape C = 7" reel/paper tape R = 11 1/4"/13" reel/plastic tape P = 11 1/4"/13" reel/paper tape O = 7" reel/flamedpaper tape I = 11 1/4"/13" reel/flamed paper tape Note: “I” and “O” are used for “F” and “E” termination size 0603/0805 Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: [email protected] (2) Process code may be added with up to three digits, used to control non-standard products and requirements. (3) Termination code “E” for conductive epoxy assembly. (4) Marking in reference to EIA198, see www.vishay.com/doc?45028 DIMENSIONS in inches (millimeters) W L T MAX. P EIA STYLE PART ORDERING NUMBER 0603 VJ0603 0805 VJ0805 1206 VJ1206 1210 VJ1210 Revision: 08-Aug-11 LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) 0.063 ± 0.005 (1.60 ± 0.12) 0.079 ± 0.008 (2.00 ± 0.20) 0.126 ± 0.008 (3.20 ± 0.20) 0.126 ± 0.008 (3.20 ± 0.20) 0.031 ± 0.005 (0.80 ± 0.12) 0.049 ± 0.008 (1.25 ± 0.20) 0.063 ± 0.008 (1.60 ± 0.20) 0.098 ± 0.008 (2.50 ± 0.20) 0.036 (0.92) 0.057 (1.45) 0.067 (1.70) 0.067 (1.70) 2 TERMINATION (P) MINIMUM MAXIMUM 0.012 0.018 (0.30) (0.46) 0.010 0.028 (0.25) (0.71) 0.010 0.028 (0.25) (0.71) 0.010 0.028 (0.25) (0.71) Document Number: 45006 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ X8R www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X8R STYLE VJ0603 VJ0805 VJ1206 EIA CODE 0603 0805 1206 25 50 25 50 25 50 VOLTAGE (VDC) VOLTAGE CODE X A X A X A CAP. CODE CAP. 331 330 pF 391 390 pF 471 470 pF •• •• •• 561 560 pF •• •• •• 681 680 pF •• •• •• •• 821 820 pF •• •• •• •• 102 1.0 nF •• •• •• •• • • 122 1.2 nF •• •• •• •• • • 152 1.5 nF •• •• •• •• • • 182 1.8 nF •• •• •• •• • • 222 2.2 nF •• •• •• •• • • 272 2.7 nF •• •• •• •• • • 332 3.3 nF •• •• •• •• • • 392 3.9 nF •• •• •• •• • • 472 4.7 nF •• •• •• •• • • 562 5.6 nF •• •• •• •• • • 682 6.8 nF •• •• •• •• • • 822 8.2 nF •• •• •• •• • • 103 10 nF •• •• •• •• • • 123 12 nF •• •• •• •• • • 153 15 nF •• •• •• •• • • 183 18 nF •• •• •• •• • • 223 22 nF •• •• •• • • 273 27 nF •• •• • • • 333 33 nF •• •• • • • 393 39 nF •• • • • 473 47 nF • • • • 563 56 nF • • • • 683 68 nF • • • 823 82 nF • • • 104 100 nF • • • 124 120 nF • • 154 150 nF • 184 180 nF • 224 220 nF • 274 270 nF 334 330 nF 394 390 nF 474 470 nF 564 560 nF 684 680 nF 824 820 nF Note (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 • Plastic Tape, •• Paper Tape X8R PACKAGING QUANTITIES BODY SIZE 0603 0805 1206 1210 TAPE SIZE 8 mm 8 mm 8 mm 8 mm VJ1210 (1) 1210 25 X 50 A • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • (1) 7" REEL QUANTITIES PACKAGING CODE “C”/“O” “T” 4000 n/a 3000 3000 n/a 3000 n/a 3000 11 1/4" AND 13" REEL QUANTITIES PACKAGING CODE “P”/“I” “R” 10 000 n/a 10 000 10 000 10 000 10 000 10 000 10 000 Note (1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement” Revision: 08-Aug-11 3 Document Number: 45006 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ X8R www.vishay.com Vishay Vitramon STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to + 40 °C ambient temperature and 70 % related humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. X8R DIELECTRIC - TYPICAL PARAMETERS TEMPERATURE COEFFICIENT OF CAPACITANCE AGING RATE 1.0 % CAPACITANCE CHANGE % CAPACITANCE CHANGE 15 10 5 0 -5 - 10 - 15 0.0 - 1.0 - 2.0 - 3.0 - 4.0 - 20 - 75 - 50 - 25 0 25 50 75 100 125 150 175 1 10 100 HOURS TEMPERATURE °C 1000 10 000 DISSIPATION FACTOR VS. TEMPERATURE DISSIPATION FACTOR VS. VOLTAGE 5.0 0.025 % DISSIPATION FACTOR DISSIPATION FACTOR 4.5 0.023 0.021 0.019 0.017 0.015 4.0 3.5 3.0 2.5 1.5 1.0 0.5 0.0 0.013 0 10 20 30 DC VOLTS APPLIED 40 - 75 - 50 - 25 50 0 25 50 75 100 125 150 175 TEMPERATURE °C VOLTAGE COEFFICIENT OF CAPACITANCE INSULATION RESISTANCE VS. TEMPERATURE 10 000 INSULATION RESISTANCE (ΩF) 0.0 CAPACITANCE CHANGE IN % X8R 2.0 - 5.0 1000 - 10.0 - 15.0 - 20.0 100 10 - 25.0 0 Revision: 08-Aug-11 10 20 30 DC VOLTS APPLIED 40 50 10 4 25 100 TEMPERATURE °C 150 Document Number: 45006 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1