42051 5 A FIXED THREE TERMINAL NEGATIVE VOLTAGE REGULATORS Commercial or Military Features: Applications: • • • • Output current to 5 Amps Output voltage To –34 V Internal short circuit protection Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Military and Hi Rel industrial applications where hermetically sealed product is required. DESCRIPTION The 42051 series of regulators covers the voltage range from –5 V through –34 V. These regulators are fabricated using hybrid techniques. The devices are complete with internal short circuit protection which includes voltage shutdown and current fold-back. To insure circuit stability under all load combinations it is recommended that a minimum of 2.0 µF capacitance (solid tantalum) be connected between power ground and the input to the regulator. ABSOLUTE MAXIMUM RATINGS Output Current - IOUT.......................................................................................................................................................5 A Power Dissipation @ 25°C Case Temperature ........................................................................................................120W Operating Temperature............................................................................................................................ -55°C to +125°C Storage Temperature ............................................................................................................................... -65°C to +150°C Input Voltage - VIN .......................................................................................................................................................-40 V NOTE: Lead Temperature (Soldering, 10 sec.) 300°C Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 05/16/01 42051 NEGATIVE VOLTAGE REGULATORS ELECTRICAL CHARACTERISTICS (Note 1) PARAMETER Output Voltage Differential Voltage VIN - VOUT Line Regulation (Note 3) SYMBOL TEST CONDITIONS MIN TYP MAX UNIT VOUT IOUT = 1A, VIN = VO -5V VOUT + .1V VOUT VOUT – .1V VDC ∆V IOUT = IMAX 5 Load Regulation (Note 2) Ripple Rejection Temperature Coefficient TC Standby Current IS Therm θjc VDC -VIN = VOUT -5V to -VIN = -40V .1 % VOUT IOUT = .25A to -IOUT = -IMAX VIN = VO -5V f = 50 to 500 Hz 1.0V (P-P) VIN – VOUT = 5V 0°C ≤ TC ≤ 100°C 40 mV 50 dB %/°C .05 25 mA 1 °C/W 0.1 %/1000 hrs al Resistance Long Term Stability Note 1: Case temperature 25°C unless otherwise specified. Note 2: Voltage measured at Pin 2 within .05 inches from case. Note 3: Instantaneous regulation, average chip temperature changes must be accounted for separately. Standard Outputs TYPE 42051 - 055 065 075 085 095 105 124 144 154 164 184 204 223 243 263 283 303 323 343 VOUT (VDC) MAX IOUT (A) -5 -6 -7 -8 -9 -10 -12 -14 -15 -16 -18 -20 -22 -24 -26 -28 -30 -32 -34 5 5 5 5 5 5 4 4 4 4 4 4 3 3 3 3 3 3 3 TYP IKNEE 6.5 6.5 6.5 6.5 6.5 6.5 5 5 5 5 5 5 4 4 4 4 4 4 4 (A) TYP ISC (A) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2 2 2 2 2 2 1.5 1.5 1.5 1.5 1.5 1.5 Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 05/16/01 42051 NEGATIVE VOLTAGE REGULATORS Mechanical Configuration Case Pin 1 Pin 2 ELECTRICAL CONNECTIONS VIN Ground VOUT Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 05/16/01