FEATURES PANEL INDICATOR LEDs - Ø9.5mm Mounting 423 SERIES PACK QUANTITY = 20 PIECES l Front panel replaceability l Must be used in conjunction with 905-000-00 panel l Domed fresnel lens for wide angle viewing l Smoked & water clear lens options l Sealed to IP40 l Product illustrated 423-532-22 in 905-000-00 panel socket. See datasheet DS084/04 mounting socket SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure Typically = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC Vopr CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE OPERATING STORAGE LENGTH TEMP TEMP 643 -0 ~ +85^ -0 ~ +85 λp Topr Tstg HIGH INTENSITY 423-501-21 Red Colour Diffused 12 20 11000 Yes 423-521-21 Yellow Colour Diffused 12 20 16000 591 -0 ~ +85^ -0 ~ +85 Yes 423-532-21 Green Colour Diffused 12 20 23000 527 -0 ~ +85^ -0 ~ +85 Yes 423-930-21 Blue Colour Diffused 12 20 7000 470 -0 ~ +85^ -0 ~ +85 Yes 423-997-21 Cold White Colour Diffused 12 20 14000 *see below -0 ~ +85^ -0 ~ +85 Yes 423-501-23 Red Colour Diffused 24-28 17.5 11000 643 -0 ~ +85^ -0 ~ +85 Yes 423-521-23 Yellow Colour Diffused 24-28 17.5 16000 591 -0 ~ +85^ -0 ~ +85 Yes 423-532-23 Green Colour Diffused 24-28 17.5 23000 527 -0 ~ +85^ -0 ~ +85 Yes 423-930-23 Blue Colour Diffused 24-28 17.5 7000 470 -0 ~ +85^ -0 ~ +85 Yes 423-997-23 Cold White Colour Diffused 24-28 17.5 14000 *see below -0 ~ +85^ -0 ~ +85 Yes Vdc mA mcd nm 0 UNITS 997F-C *Typical emission colour cold white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 C C 0 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. Refer to page 3. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS082/07 Issue 1 SAMPLES AVAILABLE Page 1 of 4 423 SERIES 6.7 5.0 Ø7.3 Ø8.4 Ø7.0 4.2 Ø0.1 17.0 Termination pins are off axis for Dimensions in mm (Typical) polarity insertion into socket Not to scale MATERIALS Body Nylon 6 Termination Pins Tin on Nickel Plated Phosphor Bronze Fresnel lens Polycarbonate Header Black Acetal Mounting Hardware Use with socket 905-000-00. TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM POWER DISSIPATION PANEL REVERSE CUTOUT VOLTAGE 423 500 3 9.5 UNITS mW Vdc mm MINIMUM MOUNTING MAX. PANEL CENTRES THICKNESS mm mm 16.5 6.5 PANEL SOCKETS & CONNECTORS Rear Retainer Ø9.5 a - Anode b - Cathode TERMINATION VIEW Lens Body Termination 423 SERIES 937 COLLAR 938 COLLAR MOUNTING HOLE Panel Socket Washer 905 SOCKET Mounting hole to be clean and burr free How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 082/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 4 Optional Reverse Protection Diode ORDER CODE SUFFIX CIRCUIT COMMENTS 01 Available on all indicators except Bi-Colour devices. De-rating Information 532, 930 & 997 501 521 How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 082/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 4 423 Series Part numbers also available in the 423 Series: PART NO. COLOUR VOLTAGE PART NO. COLOUR VOLTAGE (Vdc) Vopr (Vdc) Vopr 423-501-04 Red 20mA 423-532-24 Green 48Vdc 423-501-20 Red 5/6Vdc 423-930-04 Blue 20mA 423-501-22 Red 24Vdc 423-930-22 Blue 24Vdc 423-501-24 Red 48Vdc 423-930-24 Blue 48Vdc 423-502-21 Red 12Vdc 423-993-04 Warm White 20mA 423-503-04 Red 20mA 423-993-23 Warm White 24-28Vdc 423-503-20 Red 5/6Vdc 423-993-24 Warm White 48Vdc 423-503-22 Red 24Vdc 423-993-73 Warm White 28Vac 423-503-22-01 Red 24Vdc 423-997-04 White 20mA 423-503-24 Red 48Vdc 423-997-21 White 12Vdc 423-503-72 Red 24Vac 423-997-22 White 24Vdc 423-506-04 Orange 20mA 423-997-24 White 48Vdc UNITS 423-506-21 Orange 12Vdc 423-506-22 Orange 24Vdc 423-506-22-01 Orange 24Vdc 423-506-74 Orange 48Vac 423-506-74-50 Orange 48Vac 423-509-04 Yellow 20mA 423-509-20 Yellow 5/6Vdc 423-509-21 Yellow 12Vdc 423-509-22 Yellow 24Vdc 423-509-24 Yellow 48Vdc 423-512-04 Green 20mA 423-512-20 Green 5/6Vdc 423-512-21 Green 12Vdc 423-512-22 Green 24Vdc 423-512-22-01 Green 24Vdc 423-512-24 Green 48Vdc 423-512-72 Green 24Vac 423-521-04 Yellow 20mA 423-521-20 Yellow 5/6Vdc 423-521-22 Yellow 24Vdc 423-521-24 Yellow 48Vdc 423-521-74 Yellow 48Vac 423-532-04 Green 20mA 423-532-21 Green 12Vdc 423-532-22 Green 24Vdc The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. UNITS How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 082/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 4 of 4