Composite Backshells 440-143 Composite Ultra Low Profile EMI/RFI Micro-Banding Backshell with Qwik-Ty, Shrink Boot Porch and Self-Locking Rotatable Coupling Angle and Profile S - Straight T - 45° Elbow W - 90° Elbow CONNECTOR DESIGNATOR: A F H MIL-DTL-38999 Series I, II MIL-DTL-38999 Series III and IV Product Series 440 - EMI/RFI Non-Environmental Micro-Banding Backshells SELF-LOCKING ROTATABLE COUPLING 440 ULTRA LOW PROFILE B H Cable Entry (See Table IV) Omit for 90° Configuration Basic Part Number S Connector Designator F or H 143 Shrink Boot Option Shrink boot supplied with T option Available for S and T profiles only (Omit for none) Finish Symbol (See Table III) XM 15 09 D K T S Connector Shell Size (See Table II) Anti-Decoupling Device TYP H C Drain Hole Option (Omit "D" if not required) Band Option Band supplied with K option (Omit for none) .962 Max .320 TYP Pigtail Termination Slot A A J D Raised Configuration (Mfr's Option) Slot Option S - Pigtail Termin. Slot (Omit for none) D Dia. Typ Optional ø.125 Drain Holes Minimum 3 Spaced Equally TYP Shrink Sleeve or Boot Groove Typ N Optional ø.125 Drain Holes 3 Minimum Equally Spaced E Shrink Sleeve or Boot Lip K .32 Accomodates 600-057-1 Micro Band AS33671 Tie Strap or Equivalent Qwik-Ty Strain Relief F G L E F M G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-68 Composite Backshells 440-143 Composite Ultra Low Profile EMI/RFI Micro-Banding Backshell with Qwik-Ty, Shrink Boot Porch and Self-Locking Rotatable Coupling TABLE II: SHELL SIZE F H Entry Code Available for Straight and 45° Configuration 08 09 04 1.042 (26.5) 10 11 05 1.107 (28.1) .432 (11.0) .174 (4.4) .66 (16.8) 12 13 07 1.174 (29.8) .546 (13.9) .195 (5.0) .72 (18.3) 14 15 09 1.241 (31.5) .670 (17.0) .315 (8.0) .83 (21.1) 16 17 05 and 11 1.305 (33.1) .796 (20.2) .385 (9.8) .91 (23.1) 18 19 07 and 13 1.371 (34.8) .902 (22.9) .445 (11.3) .93 (23.6) 20 21 09 and 15 1.438 (36.5) 1.027 (26.1) .525 (13.3) 1.04 (26.4) 22 23 11 and 16 1.505 (38.2) 1.152 (29.3) .595 (15.1) 1.12 (28.4) 24 25 07, 13 and 17 1.572 (39.9) 1.276 (32.4) .655 (16.6) 1.18 (30.0) Shell Size K ± .03 L M N Max .304 (7.7) .160 (4.1) .63 (16.0) A B TABLE III: FINISH Symbol C Finish Description XM 2000 Hour Corrosion Resistant Electroless Nickel XMT 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM XW 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel D TABLE IV: CABLE ENTRY Dash Number D ± .03 E ± .020 F ± .020 G ± .020 H ± .06 J ± .09 04 .25 (6.4) .187 (4.7) .312 (7.9) .512 (13.0) .72 (18.3) .87 (22.1) 05 .31 (7.9) .187 (4.7) .312 (7.9) .512 (13.0) .75 (19.1) .93 (23.6) 07 .44 (11.2) .187 (4.7) .312 (7.9) .512 (13.0) .75 (19.1) 1.00 (25.4) 09 .56 (14.2) .219 (5.6) .375 (9.5) .630 (16.0) .76 (19.3) 1.03 (26.2) 11 .68 (17.3) .219 (5.6) .375 (9.5) .630 (16.0) .78 (19.8) 1.05 (26.7) 13 .81 (20.6) .219 (5.6) .375 (9.5) .630 (16.0) .79 (20.1) 1.06 (26.9) 15 .94 (23.9) .219 (5.6) .375 (9.5) .630 (16.0) .82 (20.8) 1.09 (27.7) 16 1.00 (25.4) .219 (5.6) .375 (9.5) .630 (16.0) .86 (21.8) 1.13 (28.7) 17 1.16 (29.5) .250 (6.4) .437 (11.1) .630 (16.0) .89 (22.6) 1.16 (29.5 ) E F NOTES © 2009 Glenair, Inc. 1. 770-001S**-0 shrink boot supplied with T option. See shrink boot product page for more details. 2. Coupling nut supplied unplated. 3. See Table I in Intro for front-end dimensional details. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-69 G