440 440-071 EMI/RFI Dual Banding Adapter Direct Coupling - Split Shell 440 F D 071 NF 16 12 K P CONNECTOR DESIGNATORS * A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 2 DIRECT COUPLING Product Series Polysulfide (Omit for none) Connector Designator B = 2 Bands K = 2 Precoiled Bands (Omit for none) Angle and Profile D = Split 90 F = Split 45 Cable Entry (Table V) Basic Part No. Shell Size (Table I) Finish (Table II) J A Thread (Table I) E B Typ. (Table I) G J (Table III) (Table IVI) (Table III) (Table IV) F (Table IV) Split 90° Split 45° H (Table IV) Termination Areas Free of Cadmium. Knurl or Ridges Mfr's Option .380 (9.7) Typ. M* N* P* .060 (1.5) Typ. * (Table V) Polysulfide Stripes P Option Band Option (K Option Shown See Note 4) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 36 www.glenair.com 440 440-071 EMI/RFI Dual Banding Adapter Direct Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) Dash No. 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 20 22 24 TABLE IV: ELBOW DIMENSIONS E F G Elbow Max Max Max Size 02 .440 (11.2) 1.940 (49.3) .680 (17.3) 03 .440 (11.2) 1.940 (49.3) .680 (17.3) 04 .440 (11.2) 1.940 (49.3) .680 (17.3) 05 .500 (12.7) 2.000 (50.8) .750 (19.1) 06 .500 (12.7) 2.000 (50.8) .750 (19.1) 07 .560 (14.2) 2.070 (52.6) .810 (20.6) 08 .560 (14.2) 2.070 (52.6) .810 (20.6) 09 .620 (15.7) 2.100 (53.3) .870 (22.1) 10 .680 (17.3) 2.200 (55.9) .930 (23.6) 11 .680 (17.3) 2.200 (55.9) .930 (23.6) 12 .750 (19.1) 2.260 (57.4) 1.000 (25.4) 13 .820 (20.8) 2.320 (58.9) 1.060 (26.9) 14 .820 (20.8) 2.320 (58.9) 1.060 (26.9) 15 .880 (22.4) 2.380 (60.5) 1.120 (28.4) 16 .880 (22.4) 2.380 (60.5) 1.120 (28.4) TABLE V: CABLE ENTRY P M N Dia Dia Dia .312 (7.9) .125 (3.2) .250 (6.4) .375 (9.5) .188 (4.8) .312 (7.9) .438 (11.1) .250 (6.4) .375 (9.5) .500 (12.7) .312 (7.9) .438 (11.1) .562 (14.3) .375 (9.5) .500 (12.7) .625 (15.9) .438 (11.1) .562 (14.3) .688 (17.5) .500 (12.7) .625 (15.9) .750 (19.1) .562 (14.3) .688 (17.5) .812 (20.6) .625 (15.9) .750 (19.1) .875 (22.2) .688 (17.5) .812 (20.6) .938 (23.8) .750 (19.1) .875 (22.2) .812 (20.6) .938 (23.8) 1.000 (25.4) .875 (22.2) 1.000 (25.4) 1.062 (27.0) .938 (23.8) 1.062 (27.0) 1.125 (28.6) 1.000 (25.4) 1.125 (28.6) 1.188 (30.2) 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 1.125 (28.6) 1.250 (31.8) 1.312 (33.3) 1.250 (31.8) 1.375 (34.9) 1.438 (36.5) 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 1.500 (38.1) 1.625 (41.3) 1.688 (42.9) © 2005 Glenair, Inc. CAGE Code 06324 H Max 1.880 (47.8) 1.880 (47.8) 1.880 (47.8) 1.940 (49.3) 1.940 (49.3) 2.010 (51.1) 2.010 (51.1) 2.040 (51.8) 2.140 (54.4) 2.140 (54.4) 2.200 (55.9) 2.260 (57.4) 2.260 (57.4) 2.320 (58.9) 2.320 (58.9) 1. Metric dimensions (mm) are indicated in parentheses. 2. When using Connector Designator B refer to pages 18 and 19 for part number development. 3. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 37 www.glenair.com