XFGN Data sheet Pre-amplified／5V Excitation／Gauge ■Features On-chip amplification and temperature compensations Pre-calibration of offset voltage and span Surface mount package ■Ordering Information ＸＦＧＮ－６ ０２５ＫＰ Ｇ ＳＲ Terminal leads configuration Model Surface mount package Length of the pressure port 6：6mm Rated Pressure (kPa) Weight (grams) Pressure type G：Gauge(Positive pressure) GV：Gauge Pressure(Negative pressure) RoHS compliance 0.35 Measurable pressure range(kPa) 0 to -24.5 XFGN-603PGVSR 0 to -100 XFGN-6100KPGVSR 0 to 25 XFGN-6025KPGSR Part number 0 to 50 XFGN-6050KPGSR 0 to 100 XFGN-6100KPGSR 0 to 200 XFGN-6200KPGSR ■Specifications Model 603PGV Recommended operating conditions Pressure type Rated pressure Measurable pressure range Temperature range Pressure media Excitation current (Constant) -24.5 0 to -24.5 6100KPGV 6025KPG 6050KPG 6100KPG 6200KPG Gauge pressure 25 50 100 0 to 25 0 to 50 0 to 100 0 to 50 Non-corrosive gases only (No liquid) 5+/-0.25 -100 0 to -100 200 0 to 200 Unit kPa kPa deg.C VDC Absolute maximum rating Twice of rated pressure 8 -10 to 80 -20 to 100 30 to 80 (Non dew condition) Electrical characteristics (Excitation voltage Vcc=5.0V constant ,ambient temperature Ta=25deg.C) Power consumption 10mA max. Output impedance 10Ω max. Source current 0.2mA max. Sink current 2mA max. Response time 2 (for the reference) Output span voltage 4.0 0.5V(at 0kPa) Offset voltage * +/-0.1V(25deg.C) , +/-0.2V(0 to 50deg.C) 4.5V(at rated pressure) Output voltage at full scale * +/-0.1V(25deg.C) , +/-0.2V(0 to 50deg.C) Accuracy * +/-5.0 Maximum load pressure Maximum excitation voltage Operating temperature Storage temperature Operating humidity * Excluding input voltage error. 1 VDC deg.C deg.C %RH mA Ω mA mA msec. V V V %FS/0-50deg.C XFGN Data sheet Pre-amplified／5V Excitation／Gauge ■Outline dimensions■ XFGN 2-φ1.1 ■Connection diagram■ View from Lavel Marking 2 XFGN Data sheet Pre-amplified／5V Excitation／Gauge ■Transfer Function■ Vout = Vs×( P×α+β) ± (Pressure Error×Temperature Error Multiplier×α×Vs) Vs=Vcc=5.0V P=Input pressure(kPa) Measurable pressure range(kPa) 0 to -24.5 0 to -100 0 to 25 0 to 50 0 to 100 0 to 200 Model XFGN-603PGVSR XFGN-6100KPGVSR XFGN-6025KPGSR XFGN-6050KPGSR XFGN-6100KPGSR XFGN-6200KPGSR α β Pressure Error (kPa) -0.03266 -0.008 0.032 0.016 0.008 0.004 0.1 0.1 0.1 0.1 0.1 0.1 0.612 2.5 0.625 1.25 2.5 5 Temperature Error Multiplier ■Output characteristics■ ↑Output voltage（mV） Output voltage at full scale 4.5V Output span voltage Offset voltage 0.5V Rated pressure 0kPa Atomospheric pressure Note ; →Pressure（kPa） Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. Please keep the sensors sealed using static shielding bags on storage.The pins of the sensor are plated by Ag. If the sensors expose to an atmosphere, the pins will be black by sulfuration. Please set Zero-calibration function up your products. The offset voltage may be shifted some mechanical stress such as mounting, installation and etc. over longtime using. 3 XFGN Data sheet Pre-amplified／5V Excitation／Gauge Reflow Soldering process recommendation profile Package Surface Temperature (Degree C) 230 210 150 Room Temp. Time a a: Rump up rate b: Pre-heating c: Rump up rate d: Heating e: Rump down rate Note ; b c d e 1 or 2 deg.C/sec. 150 to 180 deg.C,within 60 to120sec. 1 to 2 deg.C/sec. max.230 deg.C,max.10sec. 210 deg.C,within 30sec. 1 or 2 deg.C/sec. 1 ) Temperature means Surface temperature of the sensor package. 2 ) Reflow process max. 2 times. 3 ) Do not wash the sensor. 4 ) Do not put the solder and flux on the sensor package. If you have any questions regarding technical issues or specifications, please contact us. Fujikura Ltd. Sensor Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 E-mail : [email protected] 4