High Reliability Surface Mount LVCMOS Clock Oscillator Series Description 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 CW Features: Model XH7xx - XH9xx Series Pure Spectrum™ Technology 083 3 XH7 The Connor-Winfield’s 150.0 23 MHz XH7xx and Xh9xx, High Reliability Series are 5x7.5mm Surface Mount, Fixed Frequency Crystal Controlled Oscillators (XO). Designed for applications requiring tight frequency stability over a wide temperature range, operating at 2.5V or 3.3V supply voltage, the XH7xx and XH9xx series provides a LVCMOS Output with enable / disable function. 5.0 x7.0mm Surface Mount Package Supply Voltages: 2.5V or 3.3V LVCMOS Output Logic Frequency Stabilities: +/-50ppm / +/-100ppm Temperature Ranges: -55 to 125°C / -55 to 85°C Low Jitter <1pS RMS Sub-harmonics / Spurious: -70 dBc Minimal Frequency Perturbations: 3ppm Max. Guaranteed Proper Frequency Startup. Gold Plated Terminations RoHS Compliant / Lead Free. Model Specifications Absolute Maximum Ratings Parameter Units Storage Temperature Supply Voltage (Vcc) Minimum Nominal Maximum UNITS -55 - 125 °C -0.5 - 5.0 Vdc Minimum Nominal Maximum UNITS 40 - 200 MHz Note Operating Specifications Parameter Frequency Range (Fo) Note Total Frequency Tolerance Models XH72x, XH92x -50 - 50 ppm 1 Models XH73x, XH93x -100 - 100 ppm 1 Models XH7xx, XH7xx -55 - 125 °C Models XH9xx, XH9xx -55 - 85 °C Models XH7x2, XH9x2 2.375 2.500 2.625 Vdc Models XH7x3, XH9x3 3.135 3.300 3.465 Vdc 40 to 79.999 MHz - - 20 mA 80 to 89.999 MHz - - 30 mA 90 to 124.999 MHz - - 40 mA Operating Temperature Range Supply Voltage (Vcc) Supply Current (Icc) 125 to 164.999 MHz - - 50 mA 165 to 225 MHz - - 65 mA Input Characteristics Parameter Minimum Nominal Maximum Units Enable Voltage (High) (Vih) 0.7Vcc - - Vdc 2 Disable Voltage (Low) (Vil) - - 0.3Vcc Vdc 2 Enable Time - - 2 ms Disable Time - - 200 ns - - 10 uA Minimum Nominal Maximum Units - - 15 pF Output Disable Current (Standby Current) (Icc) Note LVCMOS Output Characteristics Parameter LOAD Voltage (High) (Voh) Vcc-0.4 - - Vdc (Low) (Vol) - - 0.4 Vdc (High) (Ioh) -8 - - mA (Low) (Ioh) - - 8 mA 45 50 55 % Rise / Fall Time 10% to 90% - 1 2 ns Start-Up Time - - 2 ms Period Jitter - 3 5 ps RMS Current Duty Cycle at 50% of Vcc Bulletin Page Revision Date Sm127 1 of 2 01 15 Sep 2008 Phase Jitter (BW=12kHz to 20MHz) - 0.5 1 ps RMS SSB Phase Noise at 10Hz offset - -60 - dBc/Hz SSB Phase Noise at 100Hz offset - -90 - dBc/Hz SSB Phase Noise at 1KHz offset - -125 - dBc/Hz SSB Phase Noise at 10KHz offset - -140 - dBc/Hz SSB Phase Noise at 100KHz offset - -145 - dBc/Hz Sub-harmonics - - -70 dBc Spurious - - -70 dBc Frequency Perturbations over Temperature - - 3 ppm Note 3 4 Package Characteristics Package Package Terminations Hermetically sealed ceramic package and metal cover. Solder pads are Au plated, thickness 0.30 to 1.00 Micron. Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com XH Type: High Reliability Clock LVCMOS Series 5x7mm 7 2 3 Temperature Range: 7 = -55 to 125° C 9 = -55 to 85° C Frequency Stability: 2 = +/-50 ppm 3 = +/-100 ppm Supply Voltage: 2 = 2.5Vdc. 3 = 3.3Vdc. - Package Outline .197 (5.00mm) .275 (7.00mm) .060 (1.50mm) Maximum CW 0833 XH723 150.0M Notes 1) Inclusive of calibration @ 25°C, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 10 years aging. 2) When the oscillator is disabled, the outputs are at high impedance. Output is enabled with no connection on pad 1. 3) Oscillator is guaranteed to start at the specified frequency (Fo) under all conditions. 4) This part will not exhibit frequency jumps of more than 3ppm when tested every 2°C within the operating temperature range, specified supply voltage and load. Ordering Information 150.0M Output Frequency: Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max.* *Amount of numbers after the decimal point. M = MHz Suggested Pad Layout Example: To order an XH723 with an output frequency of: XH723-150.0M = High Reliability, 5x7mm, LVCMOS Clock, 40 MHz = XH723-040.0M -55 to 125C,+/-50ppm, 3.3Vdc, Output Frequency 150MHz 74.25 MHz = XH723-074.25M 155.52 MHz = XH723-155.52M Environmental Characteristics Vibration: Shock: Soldering: Sollderability Vibration per Mil Std 883E Method 2007.3 Test Condition A Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. RoHS compliant, lead free. See solder profile. Sollderability per Mil Std 883E Method 2003 Solder Profile Pad Connections - Enable / Disable Function Pad 1 2 3 4 Enable / Disable Function (Pad 1) High or Open Low Connection Enable/Disable Ground Output Vcc Output Temperature 260°C 260°C Enable Disable (High Impedance) 220°C 180°C 150°C 120°C Model Matrix Frequency Tolerance ±50ppm XH722 XH723 XH922 XH923 Frequency Tolerance ±100ppm XH732 XH733 XH932 XH933 0 Supply Voltage Temperature Range 2.5Vdc 3.3Vdc 2.5Vdc 3.3Vdc -55 to 125°C -55 to 125°C -55 to 85°C -55 to 85°C 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. LVCMOS Output Waveform Tape and Reel Specifications 90% 50% 10% 1 US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Page Revision Date Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation SM127 2 of 2 01 15 Sep 2008