Part Number: www.SunLED.com ZM2BG55W-3 3.2x1.6mm SMD CHIP LED LAMP PRELIMINARY SPEC Features z3.2mmx1.6mm zLOW zWIDE POWER CONSUMPTION. VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE : 2000PCS / REEL. zMOISTURE zRoHS SMT LED,1.8mm THICKNESS. SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). VF 3.2 V Forward Voltage (Max.) (IF=20mA) VF 3.7 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 525 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 535 nm °C Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 39 nm V Capacitance (Typ.) (VF=0V, f=1MHz) C 65 pF 3. Specifications are subject to change without notice. M2BG (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 100 mA Power Dissipation PT 111 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Electrostatic Discharge Threshold (HBM) Part Number ZM2BG55W-3 Emitting Color Green Published Date : FEB 23, 2008 mW 1000 Emitting Material InGaN Unit Forward Voltage (Typ.) (IF=20mA) 2. Tolerance is ± 0.2(0.008") unless otherwise noted. Absolute Maximum Ratings (TA=25°C) M2BG (InGaN) Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : SDSA6226 min. typ. 2200 4990 V1 Wavelength nm λP Viewing Angle 2 θ 1/2 525 50° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com ZM2BG55W-3 3.2x1.6mm SMD CHIP LED LAMP M2BG Published Date : FEB 23, 2008 Drawing No : SDSA6226 V1 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com ZM2BG55W-3 3.2x1.6mm SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 23, 2008 Drawing No : SDSA6226 V1 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com 3.2x1.6mm SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 23, 2008 ZM2BG55W-3 Drawing No : SDSA6226 ZM2BG55W-3 V1 Checked : B.L.LIU P.4/4