Part Number: ZM2CRBGG82W 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP www.SunLED.com PRELIMINARY SPEC Features z z CHIPS CAN BE CONTROLLED SEPARATELY. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. z AVAILABLE ON TAPE AND REEL. z PACKAGE: 500PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Operating Characteristics (TA=25°C) 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) M2CR (AlInGa P) BGG (InGaN) Unit M2CR (AlInGaP) BGG (InGaN) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.2 3.2 V Forward Voltage (Max.) (IF=20mA) VF 2.8 4.0 V Reverse Voltage VR 5 5 V Forward Current IF 50 30 mA IR 10 10 uA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Reverse Current (Max.) (VR=5V) iFS 150 100 mA λP 640 520 nm Power Dissipation PT 140 120 mW Wavelength of Peak Emission (Typ.) (IF=20mA) - 1000 V Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 630 525 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 25 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 27 100 pF Operating Temperature Storage Temperature TA -40 ~ +85 Storage Temperature Tstg -40 ~ +85 Part Number ZM2CRBGG82W Emitting Color Emitting Material Red AlInGaP Green InGaN Published Date : FEB 27,2008 °C Lens-color Luminous Intensity (IF=50mA *30mA) mcd Water Clear Drawing No : SDSA6409 V1 Wavelength nm λP min. typ. 3300 4490 640 *380 *745 520 Checked : B.L.LIU Viewing Angle 2 θ 1/2 100° P.1/5 Part Number: ZM2CRBGG82W 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP www.SunLED.com BGG M2CR Published Date : FEB 27,2008 Drawing No : SDSA6409 V1 Checked : B.L.LIU P.2/5 Part Number: ZM2CRBGG82W 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP www.SunLED.com BGG Published Date : FEB 27,2008 Drawing No : SDSA6409 V1 Checked : B.L.LIU P.3/5 Part Number: ZM2CRBGG82W 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP www.SunLED.com Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 27,2008 Drawing No : SDSA6409 V1 Checked : B.L.LIU P.4/5 Part Number: PACKING & LABEL SPECIFICATIONS Published Date : FEB 27,2008 ZM2CRBGG82W 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP www.SunLED.com Drawing No : SDSA6409 ZM2CRBGG82W V1 Checked : B.L.LIU P.5/5