ZRO0736B2LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital communication systems • Downconverters • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 736 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -125 Harmonic Suppression (2nd) -24 Tuning Voltage 0 Tuning Sensitivity (avg.) Power Output Max Units 737 MHz dBc/Hz -18 dBc 6 Vdc MHz/V 2 7 11 dBm Input Capacitance 100 pF Pushing .06 MHz/V Pulling (12 dB Return Loss, Any Phase) .3 MHz 85 °C Max Units Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 9 ZMX-14-SM Min Typ 8 25 Vdc 30 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module ZRO0736B2LF Rev A1 Tuning Curve, typ. 747 FREQUENCY (MHz) 745 743 741 85 °C 25 °C -40 °C 739 737 735 733 731 729 727 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 14 RECOMMENDED FOOTPRINT 13 SEVERAL HOLES OF o 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 12 11 10 9 8 0.030 MIN. CUTBACK FROM LIVE PADS 7 6 730 732 733 734 736 737 738 740 741 743 744 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions GOLD PLATED PADS SOLDER MASK PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B