SHOULDER ZTT_MT

SHOULDER ELECTRONICS CO., LTD.
CERAMIC RESONATOR Data Sheet
PRODUCT 产 品:
CERAMIC RESONATOR
MODEL NO 型 号: ZTT....MT
PREPARED 编 制:
Fengyu
CHECKED 审 核:
York
APPROVED 批 准:
DATE
Http://www.shoulder.cn
日 期:
2007-01-25
SHOULDER ELECTRONICS CO., LTD.
1. Scope:
The specification is fit for ceramic resonator 6.01-13.00MHz.
2. Model Name:
Model Name
ZTT…MT
Customer’s part number
Customer’s spec number
3. Outside Dimensions:
3-1 Outsider: The mark is clear. The appearance is smooth, non-dirty & non-damage.
3-2 Outsider dimension:
4. Electrical Characteristics:
No.
Item
Characteristics
ZTT…MT
4-1
Oscillate Frequency (MHz)
6.01-13.00
4.2
Frequency Tolerance max
±0.5%
4.3
Resonant Impedance max(Ω)
25
4.4
Built – in Capacitance (PF)
30
4.5
Insulate Resistance min(MΩ)
100
4.6
Withstanding Voltage D.C(V)
4.7
Voltage
1 D.C Voltage max V
2 Input Voltage max V
6
15Vp-p
4.8
Temp characteristics of Oscillate frequency max
±0.3%
4.9
4.10
Operating Temp Range
Storage Temp (
100
max 5 sec
-20 ~ +80
)
-55 ~ +85
5. Test Circuit:
VDD
VDD
IC
IC
IC
R
IC
R
C1
C2
3-PIN
2-PIN
IC
1/6TC4069UBE
VDD
2
+5V 0.1V
R
1M
C1 C2
30PF
6. Physical and Environmental Characteristics:
No
Item
6-1
Terminal
strength
6-2
Resistance to
soldering heat
Thermal shock
6-3
6-4
Vibration
Shock
High
temperature
Damp & heat
(cyclic)
Low
temperature
Low air
pressure
Damp & heat
(cyclic)
6-5
Damp & heat
(steady state)
6-6
Life test
Condition
Force of 1kg is applied to each lead in axial
direction, keep for 10sec, then force of 0.5kg is
applied to each lead in aerial direction. The lead
shall be bend 90 degree in one direction, then
in the opposite direction and return to normal.
Lead terminals are immersed up to 2.0mm of
body in a solder bath (260±5 ), keep for
5±0.5sec, then return to normal temp. For
24±2hrs.
Temp:-55~+85
, 5cycles, keep for 30min,
return to normal temp, for 24±2hrs.
Vibration:frequency:10~55Hz,
amplitude:1.5mm, keep for 6hrs
Va: 294m/s2, pulse time: 18ms
Temp: +85
Non-evident
damage.
Non-evident
damage and meet
table-1, the mark
is clear.
Non-evident
damage and meet
table-1, the mark
is clear.
, keep for 16hrs.
Trial Db, the first circle
Temp: -55
Result
, keep for 2hrs.
Air press: 8.5kPa keep for 2hrs.
Non-breakthrough,
or arc and meet
table-1,
non-evident
damage the mark
is clear.
Trial Db, the rest cycles, return to normal temp
for 24±2hrs.
Non-evident
Temp: 40±2 , humidity: 90~95%. Keep for damage, the mark
is
clear,
meet
500hrs, return to normal temp for 24±2hrs.
table-1.
Temp:+85 , keep for 1000hrs, return to normal
Meet table-1.
temp for.
Table 1
No.
1
2
3
Test item
Oscillate frequency max
Resonant impedance ( ) max
Insulate resistance (M ) min
The value can be changed
±0.3%
±5
100