P/N 48-6645-18 48-Pin 0.5mm QFP-to-48-Pin 0.600" DIP Adapter FEATURES •Makes 48-pin QFP prototype circuits with a standard breadboard easy. GENERAL SPECIFICATIONS •BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides •PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 •OPERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS •SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION 48-6645-18-P Optional Panelized Version Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18090 Rev. AA